Bosch PSB 10,8 LI-2 manual

View a manual of the Bosch PSB 10,8 LI-2 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Bosch
  • Product: Screw Machine
  • Model/name: PSB 10,8 LI-2
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian, Swedish, Portuguese, Danish, Norwegian, Finnish, Turkish

Table of Contents

Page: 7
8 | English
2 609 006 337 | (18.7.12) Bosch Power Tools
Luxemburg
Tel.: +32 2 588 0589
Fax: +32 2 588 0595
E-Mail: outillage.gereedschap@be.bosch.com
Transport
Die enthaltenen Li-Ionen-Akkus unterliegen den Anforderun-
gendes Gefahrgutrechts. DieAkkuskönnendurchdenBenut-
zer ohne weitere Auflagen auf der Straße transportiert wer-
den.
Beim Versand durch Dritte (z.B.: Lufttransport oder Spediti-
on) sind besondere Anforderungen an Verpackung und Kenn-
zeichnung zu beachten. Hier muss bei der Vorbereitung des
Versandstückes ein Gefahrgut-Experte hinzugezogen werden.
Versenden Sie Akkus nur, wenn das Gehäuse unbeschädigt
ist. Kleben Sie offene Kontakte ab und verpacken Sie den Ak-
ku so, dass er sich nicht in der Verpackung bewegt.
Bitte beachten Sie auch eventuelle weiterführende nationale
Vorschriften.
Entsorgung
Elektrowerkzeuge, Akkus, Zubehör und Verpackun-
gen sollen einer umweltgerechten Wiederverwertung
zugeführt werden.
Werfen Sie Elektrowerkzeuge und Akkus/Batterien nicht in
den Hausmüll!
Nur für EU-Länder:
Gemäß der europäischen Richtlinie
2002/96/EG müssen nicht mehr ge-
brauchsfähige Elektrowerkzeuge und ge-
mäß der europäischen Richtlinie
2006/66/EG müssen defekte oder ver-
brauchte Akkus/Batterien getrennt gesam-
melt und einer umweltgerechten Wiederverwendung zuge-
führt werden.
Nicht mehr gebrauchsfähige Akkus/Batterien können direkt
abgegeben werden bei:
Deutschland
Recyclingzentrum Elektrowerkzeuge
Osteroder Landstraße 337589 Kalefeld
Schweiz
Batrec AG
3752 Wimmis BE
Änderungen vorbehalten.
English
General Power Tool Safety Warnings
Read all safety warnings and all in-
structions.Failuretofollowthewarnings
and instructions may result in electric shock, fire and/or seri-
ous injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated(corded) power toolorbattery-operated(cordless)
power tool.
Work area safety
f Keepworkareacleanandwelllit.Clutteredordarkareas
invite accidents.
f Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
f Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical safety
f Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
f Avoidbodycontactwithearthedorgroundedsurfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
f Do not expose power tools to rain or wet conditions.
Waterenteringapowertoolwillincreasetheriskofelectric
shock.
f Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges and moving parts. Damaged
or entangled cords increase the risk of electric shock.
f When operating a power tool outdoors, use an exten-
sioncord suitablefor outdoor use. Useofa cord suitable
for outdoor use reduces the risk of electric shock.
f If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
Personal safety
f Stay alert, watch what you are doing and use common
sensewhen operating apower tool.Do notuse apower
toolwhileyouaretiredor undertheinfluenceofdrugs,
alcohol or medication. A moment of inattention while op-
erating power tools may result in serious personal injury.
f Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal inju-
ries.
f Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or en-
ergising power tools that have the switch on invites acci-
dents.
f Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a ro-
tating part of the power tool may result in personal injury.
WARNING
OBJ_BUCH-1652-001.book Page 8 Wednesday, July 18, 2012 1:44 PM
Page: 8
English | 9
Bosch Power Tools 2 609 006 337 | (18.7.12)
f Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
f Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
f If devices are provided for the connection of dust ex-
traction and collection facilities, ensure these are con-
nected and properly used. Use of dust collection can re-
duce dust-related hazards.
Power tool use and care
f Donotforcethe powertool.Use thecorrectpower tool
for your application. The correct power tool will do the
job better and safer at the rate for which it was designed.
f Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
f Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
f Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
f Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other
condition thatmay affectthe powertool’s operation.If
damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power
tools.
f Keepcuttingtoolssharpandclean. Properlymaintained
cuttingtoolswithsharpcuttingedgesarelesslikelytobind
and are easier to control.
f Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
Battery tool use and care
f Recharge only with the charger specified by the manu-
facturer. A charger that is suitable for one type of battery
pack may create a risk of fire when used with another bat-
tery pack.
f Use power tools only with specifically designated bat-
tery packs. Use of any other battery packs may create a
risk of injury and fire.
f When battery pack is not in use, keep it away from oth-
er metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
f Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addition-
ally seek medical help. Liquid ejected from the battery
may cause irritation or burns.
Service
f Haveyourpowertoolservicedbyaqualifiedrepairper-
son using only identical replacement parts. This will en-
sure that the safety of the power tool is maintained.
Safety Warnings for Drills and
Screwdriver
f Wear ear protectors when impact drilling. Exposure to
noise can cause hearing loss.
f Use auxiliary handle(s), if supplied with the tool. Loss
of control can cause personal injury.
f Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
or fastener may contact hidden wiring. Cutting accesso-
ry and fasteners contacting a “live” wire may make ex-
posed metal parts of the power tool “live” and could give
the operator an electric shock.
f Use appropriate detectors to determine if utility lines
are hidden in the work area or call the local utility com-
pany for assistance. Contact with electric lines can lead
to fire and electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes property dam-
age.
f Switch off thepower tool immediatelywhenthetoolin-
sert jams. Be prepared for high reaction torque that
can cause kickback. The tool insert jams when:
— the power tool is subject to overload or
— it becomes wedged in the workpiece.
f Hold the machine with a firm grip. High reaction torque
can briefly occur while driving in and loosening screws.
f Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
f Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
f Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and
moisture. Danger of explosion.
f In case of damage and improper use of the battery,
vapours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can
irritate the respiratory system.
f Use the battery only in conjunction with your Bosch
power tool. This measure alone protects the battery
against dangerous overload.
OBJ_BUCH-1652-001.book Page 9 Wednesday, July 18, 2012 1:44 PM
Page: 9
10 | English
2 609 006 337 | (18.7.12) Bosch Power Tools
f Use only original Bosch batteries with the voltage list-
edonthenameplateofyourpowertool. Whenusingoth-
er batteries, e. g. imitations, reconditioned batteries or
other brands, there is danger of injury as well as property
damage through exploding batteries.
Additional Safety and Working
Instructions
f Dustsfrommaterialssuchaslead-containingcoatings,
somewoodtypes,mineralsandmetalcanbeharmfulto
one’s health and cause allergic reactions, lead to respi-
ratory infections and/or cancer. Materials containing as-
bestos may only be worked by specialists.
– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the
materials to be worked.
f Prevent dust accumulation at the workplace. Dusts can
easily ignite.
f Before any work on the machine (e. g., maintenance,
tool change, etc.) as well as during transport and stor-
age, set the rotational direction switch to the centre
position. Unintentionalactuationofthe On/Offswitchcan
lead to injuries.
f Thebatteryissuppliedpartiallycharged.Toensurefull
battery capacity, completely charge the battery in the
battery charger before using for the first time.
f Read the operating instructions of the battery charger.
f Apply the power tool to the screw only when it is
switched off. Rotating tool inserts can slip off.
f Adjust the gear switch only when the machine is at a
complete stop.
f If the gear switch cannot be pushed to the stop, turn
the drill chuck a little.
f The battery charge-control indicator indicates the
chargeconditionofthebatteryforafewsecondswhen
the On/Off switch is pressed half or fully through. It
consists of a three-colour illuminating LED.
f Whennotusingthepowertool,switchitoffinordertosave
energy.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer
manner.
LED Capacity
Continuous lighting, green ≥ 66%
Continuous lighting, orange 33—66%
Continuous lighting, red 11—33%
Flashing light, red ≤ 11%
Symbol Meaning
PSB 10,8 LI-2: Combination Cordless
Drill
Grey-marked area: Handle (insulated
gripping surface)
Article number
Read all safety warnings and all instruc-
tions
Before any work on the machine itself,
remove the battery
Wear ear protection.
Movement direction
Reaction direction
Right/left rotation
Screwdriving
Drilling without impact
Impact drilling
Low speed
High speed
Switching On
Switching Off
U Rated voltage
n0 1 No-load speed (1. gear)
n0 2 No-load speed (2. gear)
nS Impact rate
M Maximum torque according to ISO 5393
Brickwork
OBJ_BUCH-1652-001.book Page 10 Wednesday, July 18, 2012 1:44 PM
Page: 10
English | 11
Bosch Power Tools 2 609 006 337 | (18.7.12)
Delivery Scope
Combination cordless drill.
Battery, application tools and other accessories shown or de-
scribed are not part of the standard delivery scope.
A complete overview of accessories can be found in our ac-
cessories program.
Intended Use
The machine is intended for driving in and loosening screws
as well as for drilling in wood, metal, ceramic and plastic and
for impact drilling in brick, brickwork and masonry.
Technical Data
The technical data of the machine are listed in the table on
page 71.
Please observe the article number on the type plate of your
machine. The trade names of the individual machines may
vary.
Declaration of Conformity
We declare under our sole responsibility that the product
described under “Technical Data” is in conformity with the
following standards or standardization documents:
EN 60745 according to the provisions of the directives
2011/65/EU, 2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
25.04.2012
Noise/Vibration Information
The measured values of the machine are listed in the table on
page 71.
Noise and vibrational values (vector sum of three directions)
determined according to EN 60745.
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN60745 and maybeused tocompare one toolwith
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications,withdifferentaccessoriesorpoorlymaintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of thelevelofexposuretovibrationshouldalso
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
fromtheeffectsofvibrationsuchas:maintainthetoolandthe
accessories, keep hands warm, organise work patterns.
Mounting and Operation
Thefollowingtableindicatestheactionobjectivesformountingandoperationofthe powertool. Theinstructions foreachaction
objective are shown aside. Depending on the type of application, various instruction combinations are required. Observe the
safety instructions.
Metal
Wood
Ø Drilling diameter, max.
Ø Max. screw dia.
Chuck clamping range
Weight according to EPTA-Procedure
01/2003
LwA Sound power level
LpA Sound pressure level
K Uncertainty
ah Vibration total value
Symbol Meaning
Dr. Egbert Schneider
Senior Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Action Figure Please observe Page
Removing the battery 1 72
OBJ_BUCH-1652-001.book Page 11 Wednesday, July 18, 2012 1:44 PM
Page: 11
12 | English
2 609 006 337 | (18.7.12) Bosch Power Tools
Maintenance and Cleaning
f For safe and proper working, always keep the machine
and ventilation slots clean.
After-sales Service and Customer
Assistance
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Our customer service representatives can answer your ques-
tions concerning possible applications and adjustment of
products and accessories.
Inallcorrespondenceandsparepartsorder,pleasealwaysin-
clude the 10-digit article number given on the type plate of
the machine.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
Inserting the battery 2 72
Mounting application tools 3 72
Reversing the rotational direction 4 73
Setting the torque 5 73
Setting the operating mode 6 74
Gear selection, mechanical 7 74
Switching on and off 8 75
Selecting accessories – 76
Action Figure Please observe Page
OBJ_BUCH-1652-001.book Page 12 Wednesday, July 18, 2012 1:44 PM
Page: 12
Français | 13
Bosch Power Tools 2 609 006 337 | (18.7.12)
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: +61 (01300) 307 044
Fax: +61 (01300) 307 045
Inside New Zealand:
Phone: +64 (0800) 543 353
Fax: +64 (0800) 428 570
Outside AU and NZ:
Phone: +61 (03) 9541 5555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: +27 (011) 6 51 96 00
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: +27 (011) 4 93 93 75
Fax: +27 (011) 4 93 01 26
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: +27 (031) 7 01 21 20
Fax: +27 (031) 7 01 24 46
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: +27 (021) 5 51 25 77
Fax: +27 (021) 5 51 32 23
E-Mail: bsc@zsd.co.za
Bosch Headquarters
Midrand, Gauteng
Tel.: +27 (011) 6 51 96 00
Fax: +27 (011) 6 51 98 80
E-Mail: rbsa-hq.pts@za.bosch.com
Transport
The contained lithium-ion batteries are subject to the Danger-
ous Goods Legislation requirements. The user can transport
the batteries by road without further requirements.
Whenbeingtransportedbythirdparties(e.g.:airtransportor
forwarding agency), special requirements on packaging and
labelling must be observed. For preparation of the item being
shipped, consulting an expert for hazardous material is re-
quired.
Dispatch batteries only when the housing is undamaged.
Tape or mask off open contacts and pack up the battery in
such a manner that it cannot move around in the packaging.
Please also observe possibly more detailed national regula-
tions.
Disposal
The machine, rechargeable batteries, accessories
and packaging should be sorted for environmental-
friendly recycling.
Do not dispose of power tools and batteries/rechargeable
batteries into household waste!
Only for EC countries:
According to the European Guideline
2002/96/EC, power tools that are no long-
er usable, and according to the European
Guideline 2006/66/EC, defective or used
battery packs/batteries, must be collected
separately and disposed of in an environ-
mentally correct manner.
Batteries no longer suitable for use can be directly returned
at:
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
Subject to change without notice.
Français
Avertissements de sécurité généraux
pour l’outil
Lire tous les avertissements
de sécurité et toutes les ins-
tructions. Ne pas suivre les avertissements et instructions
peut donner lieu à un choc électrique, un incendie et/ou une
blessure sérieuse.
Conserver tous les avertissements et toutes les instruc-
tions pour pouvoir s’y reporter ultérieurement.
Le terme « outil » dans les avertissements fait référence à vo-
tre outil électrique alimenté par le secteur (avec cordon d’ali-
mentation) ou votre outil fonctionnant sur batterie (sans cor-
don d’alimentation).
Sécurité de la zone de travail
f Conserver la zone de travail propre et bien éclairée. Les
zonesendésordreousombressontpropicesauxaccidents.
f Ne pas faire fonctionner les outils électriques en at-
mosphère explosive, par exemple en présence de liqui-
des inflammables, de gaz ou de poussières. Les outils
électriques produisent des étincelles qui peuvent enflam-
mer les poussières ou les fumées.
AVERTISSEMENT
OBJ_BUCH-1652-001.book Page 13 Wednesday, July 18, 2012 1:44 PM
Page: 70
| 71
Bosch Power Tools 2 609 006 337 | (18.7.12)
PSB 10,8 LI-2
3 603 J83 9..
U V= 10,8
n0 1 min-1
0 – 400
n0 2 min-1
0 – 1300
nS min-1
0 – 19 500
M Nm 30
M Nm 15
Ø mm 6
Ø mm 8
Ø mm 20
Ø mm 6
mm 0 – 10
kg 1,1
LwA dB(A) 94
LpA dB(A) 83
K dB 3
ah m/s2
15
K m/s2
2,5
ah m/s2
<2,5
K m/s2
1,5
ah m/s2
<2,5
K m/s2
1,5
OBJ_BUCH-1652-001.book Page 71 Wednesday, July 18, 2012 1:44 PM
Page: 71
2 609 006 337 | (18.7.12) Bosch Power Tools
72 |
2
3
1
1
2
3
1
1
2
OBJ_BUCH-1652-001.book Page 72 Wednesday, July 18, 2012 1:44 PM
Page: 72
| 73
Bosch Power Tools 2 609 006 337 | (18.7.12)
5
4
Min.
Max.
OBJ_BUCH-1652-001.book Page 73 Wednesday, July 18, 2012 1:44 PM
Page: 73
2 609 006 337 | (18.7.12) Bosch Power Tools
74 |
7
6
OBJ_BUCH-1652-001.book Page 74 Wednesday, July 18, 2012 1:44 PM
Page: 74
| 75
Bosch Power Tools 2 609 006 337 | (18.7.12)
8
OBJ_BUCH-1652-001.book Page 75 Wednesday, July 18, 2012 1:44 PM
Page: 75
2 609 006 337 | (18.7.12) Bosch Power Tools
76 |
10,8 V (Li-Ion)
2 607 336 910 (1,5 Ah)
AL 1130 CV
(10,8 V)
2 607 225 134 (EU)
2 607 225 136 (UK)
2 607 225 138 (AU)
AL 1115 CV
(10,8 V)
2 607 225 514 (EU)
2 607 225 516 (UK)
AL 1105 CV
(10,8 V)
2 607 225 650 (EU)
2 607 225 652 (UK)
OBJ_BUCH-1652-001.book Page 76 Wednesday, July 18, 2012 1:44 PM

Question & answers

There are no questions about the Bosch PSB 10,8 LI-2 yet.

Ask a question about the Bosch PSB 10,8 LI-2

Have a question about the Bosch PSB 10,8 LI-2 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Bosch PSB 10,8 LI-2. Please make sure that you describe your difficulty with the Bosch PSB 10,8 LI-2 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.