Bosch PAM 20001 manual

View a manual of the Bosch PAM 20001 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Bosch
  • Product: Air-conditioning
  • Model/name: PAM 20001
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian, Portuguese

Table of Contents

Page: 25
Table of contents
Environmental protection
Recommendations for the disposal of packaging...................27
Recommendations for the disposal of your old appliance......27
Recommendations for saving energy .....................................27
Important Information
Before connecting your appliance ..........................................28
Your new appliance
Description of the appliance ...................................................29
Control panel...........................................................................30
Description of accessories......................................................31
Requirements for use
Requirements for use..............................................................31
Navigation
"Up" and "down" keys............................................................32
"+" and "–" keys......................................................................32
Instructions for Use
Preparing the appliance before use........................................33
Turning the appliance on and off ............................................35
Selecting the operation function .............................................35
Cooling....................................................................................35
Dehumidification......................................................................36
Air purification.........................................................................37
Selecting the temperature.......................................................37
Selecting the speed ................................................................37
Side fins..................................................................................38
Setting the clock / Programming the timer..............................38
Cleaning, Transportation and Maintenance
Cleaning the appliance...........................................................43
Cleaning and changing the purifying filters.............................43
Transportation requirements...................................................44
Storage requirements .............................................................44
Prior to use at change of season............................................44
Things to check before calling the Technical
Service
General operation...................................................................45
Noise.......................................................................................45
Technical Service / Warranty /
Technical Information.....................................................46
26
Page: 26
27
27
Environmental protection
Recommendations for the disposal
of packaging
❏ Respect the environment when disposing of
the packaging your appliance comes
packed in.
❏ Our products are carefully packed for
transportation. All of the material used in
our packaging is environmentally friendly
(the cardboard is manufactured from used
paper) and may be recycled.
❏ Recycling packaging helps conserve raw
materials and reduces the amount of waste
produced in the world.
❏ Actively help protect the environment by
disposing of packaging properly. Take it to
your nearest local council disposal point or
it may be possible to return it to your
supplier.
Recommendations for the disposal
of your old appliance
❏ Unplug your appliance from the mains
electricity supply and cut the power cable.
❏ Appliances of this kind include both
recyclable material, which may be used
again, and hazardous products (such as
heavy metals and liquid refrigerants), which
may pollute the soil or the atmosphere.
Actively help protect the environment by
ensuring that your old appliance is disposed
of in accordance with environmentally
friendly practices. Dispose of your appliance
at an official disposal or recycling point (ask
your local council where the nearest
disposal point is). Appliances of this kind
contain refrigerants which must be disposed
of in accordance with current regulations.
❏ This appliance is labelled in accordance
with European Directive 2002/96/EG
concerning used electrical and electronic
appliances (waste electrical and electronic
equipment - WEEE).
The guideline determines the framework for
the return and recycling of used appliances
as applicable throughout the EU.
Recommendations for saving energy
Your appliance consumes energy when in use.
The consumption of energy produces an
environmental impact. Energy consumption
can be reduced enhancing the efficiency of
your appliance.
❏ Turn your air appliance off when it is not
needed.
❏ Select an ideal temperature; excessively
low temperatures result in high energy
consumption.
❏ Locate your appliance away from possible
heat sources (sunlight, etc.) and in a
position with good air circulation.
❏ Ensure that your appliance is installed
properly. The energy consumed can be cut
by up to 30% by reducing the entry of heat
into the room with awnings, blinds or
curtains on glazed surfaces.
❏ Use the accessories supplied with your
appliance and the specific accessories
described in "Description of accessories" in
order to minimise the entry of air from
outdoors. When using accessories which
require holes to be drilled in walls or
windows, the hole should be as precise as
possible and sealed with silicon, plaster or
similar material to prevent air from flowing
through any gaps.
Page: 27
28
28
Environmental protection
Important Information
Before connecting your appliance
❏ Read the instructions book before using the
appliance for the first time. It contains
important information concerning not only
how to use the appliance, but also
maintenance and personal safety.
❏ Keep this instructions book. It may be
needed by another user at a later date.
❏ Do not use the appliance when damaged.
❏ Your appliance should be assembled and
connected to the mains electricity supply in
accordance with the assembly instructions
and current regulations. You may lose your
warranty if you fail to observe these
instructions.
❏ Our appliances are manufactured in
accordance with current safety regulations.
Only technicians instructed in these matters
are authorised to repair them. Your safety is
at stake.
❏ It is recommended that you follow the
manufacturer’s instructions concerning the
air expulsion tube (see "Preparing the
appliance before use") in order to prevent
efficiency loss and unnecessary energy
consumption.
❏ Avoid sharp bends on the air expulsion tube
and do not lengthen it more than necessary.
❏ When expelling hot air through sliding
windows, install the accessory which
prevents hot air entering the room from
outdoors and enhances efficiency.
❏ Make sure that the diffusion duct is
positioned in such a way that the window
can be closed as far as possible in order to
prevent air from outdoors entering the room.
❏ Check that the sleeves (collection and
diffusion) are correctly joined to the air
expulsion tube. See "Ways of releasing air
outdoors".
❏ Make sure that the air intakes and outlets
are not obstructed. Keep them clean and
free of dirt, dust and foreign objects.
❏ Make sure that the filters fitted on your
appliance are clean and installed properly
(see "Cleaning and Maintenance").
❏ In the summer, ventilate the building when
the air outdoors is at its coolest (early
morning, night).
❏ Make sure that the drainage plug is fully
inserted. It may have come loose during
transportation, Fig. 1.
Fig. 1
Page: 28
29
Your new appliance
Description of the appliance
Diffusion duct
Basic filter
Hot air outlet
Air intake
Air intake
Cold air outlet
Cold air outlet
Front flap
Hot-air expulsion
tube
Cable housing
Removable tank
Characteristics plate
Side fins
Handles
Air conditioning unit
Wheels
Double active filter
Condensed water
drainage pipe plug
Air expulsion tube
parking hook
Water drainage pipe
Flow director
Fig. 2
Page: 29
30
Your new appliance
Control panel
UP key
+
–
Down key
ON/OFF
Timer key
Side air
output key
Auto key
Digital display screen for
temperature, time, speed,
mode, etc.
Fig. 3
Function menu
• Cooling
• Dehumidification
• Air purification
Desired
temperature
display
Additional function
display:
• Fault warning
• Side grilles
• Change filter
indication
• Water tank full
Manual / auto
mode display
Stop time
menu
Current time
display
Manual speed Auto speed
Timer menu
Start time
menu
Fig. 4
Page: 30
31
Your new appliance
Description of accessories
Suction Base Double Wall grommet / Sliding
pad filter active Window grommet balcony
filter accessory
Art. Nr.: Art. Nr.: Art. Nr.:
PAZ10000 PAZ11000 475075
PAM20001 /
• • *
Approx. ø wall
max. (length x 10,5 70 x 10
width) cm. 205 x 10
Standard accessories: These accessories are supplied with the appliance.
•Optional accessories: These accessories are available for purchase from the
manufacturer's official technical service and authorised distributors.
*Optional accessories: These accessories are only available for purchase from the
manufacturer's official technical service.
Requirements for use
Requirements for use
❏ This home appliance should be connected
to a 220/240 V, 50 Hz mains electricity
supply via an earthed socket.
❏ It must be protected with a 10 A slow-action
fuse.
❏ Should an extension lead be required, then
this lead should be at least 1.5 mm2
thick
per terminal, less than 25 m long and
earthed.
❏ There is a cavity at the back of the
appliance to house the mains electricity
supply cable. See Fig. 2.
❏ Do not allow water to enter your appliance
and do not cover the air intakes/outlets.
❏ For safety reasons, the appliance must be
at least 20 cm away from any nearby
surface before it is turned on, Fig. 5.
mín.
20 cm. mín.
20 cm.
Fig. 5
Warning!
The mains electricity supply connection
cable must only be replaced by authorised
members of the manufacturer’s Official
Technical Service.
When the appliance is turned off and then
turned back on, it takes the compressor 3
minutes to start up again. This period of
time is required in order to ensure correct
operation.
Avoid direct contact with the air expelled
through the expulsion tube.
Page: 31
32
Navigation
The control panel is designed to make it
easier to use your appliance. The following
points need to be taken into consideration.
The "up" and "down" keys are used to move
up and down the screen. The "+" and "–" keys
(right and left) are used to move to the right
and to the left in the selection box. The box
shows the function selected for modification.
The following is an example of navigation:
Up and down keys
The "up" and "down" keys are used to move
up and down the screen.
"Down" key :
Starting from the screen shown in the first
figure (the selection box is situated on the
operation function option). If you press key ,
the selection box moves down to the
"Temperature selection" function.
If you press key again, the selection box
moves down to the “speed selection” function.
"Up" key :
Key works in exactly the same way as key
, the selection box moving up rather than
down.
Cyclical operation:
Both keys work cyclically, i.e. if the selection
box is at the bottom of the screen and key
is pressed again, the selection box moves to
the top of the screen. Likewise, if the selection
box is at the top of the screen and key is
pressed, the selection box moves to the
bottom of the screen.
"+" and "–" keys
The "+" and "–" keys are used to move to the
right and to the left within the selection box. If
the function selected is temperature, these
keys are used to increase and reduce
the desired temperature as shown below:
Page: 32
33
Navigation
Instructions for Use
Preparing the appliance before use
Installing the air expulsion tube
❏ Fit the air expulsion tube assembly into the
housing on the top of the appliance at the
back, Fig. 7.
Housing for the
air expulsion
assembly
Fig. 6 Fig. 7
In order to fit the expulsion tube assembly
properly in its housing, it is necessary to slide
the sleeve into the positioning slot (as shown
by the arrows on Fig. 8).
The diffusion duct, Fig. 6, is added when the
tube assembly has been fitted onto the
appliance.
Press the "Push" tab (Fig. 9, 1) and slide out
(Fig, 9, 2) to remove the assembly from the
appliance.
Fig. 8
Installing the air expulsion accessories for
the air-conditioning function
There are a set of accessories used to expel
hot air (see "Description of accessories").
Installation for the dehumidification and air
purification function
❏ Remove the diffusion duct and set the air
expulsion tube to the position shown in
fig. 10.
❏ The expulsion tube may also be totally
dismantled if desired.
Fig. 10
Installing the suction pad
❏ Open the window slightly and position the
diffusion duct between the jamb and the
glaze frame.
❏ Close the window as far as possible and
secure it with the suction pad supplied,
Fig. 11.
Fig. 11
Suction pad
Fig. 9
Page: 33
a
b
c
d
34
Instructions for Use
❏ Remove the diffusion sleeve and connect
the air expulsion tube to the accessory.
❏ If permanent installation is to be performed
through the window, then it is only
necessary to use the transparent end piece
on the accessory. A 10.5-cm diameter hole
needs to be cut in the glass, Fig. 15.
Fig. 12
Fig. 13
Permanent installation
Performed using the wall grommet / window
grommet accessory. See "Description of
accessories".
❏ To expel hot air through the wall, it is
necessary to make a hole in the wall and fit
the wall grommet, Fig. 14.
24 - 38 cm. Fig. 14
Installing the sliding window / balcony
accessory
❏ The sliding window/balcony installation
accessory supplied with your appliance can
also be used (See "Description of
accessories"), Fig. 12 : a, b, c, d. This
accessory can be used for both horizontal
and vertical windows.
❏ The accessory has two holes on the side to
fit it to the window / balcony with. The user
can secure it to the frame or wall with two
screws (not included with the accessory) to
prevent it from moving or falling out of
place, Fig. 13.
Fig. 15
Page: 34
Turning the appliance on and off
Press the "On" / "Off" key to start the
appliance.
❏ dehumidification .
❏ air purification .
Place the selection box on the operation
function menu using the "up" and "down"
keys (see "Navigation": “up“ and "down" keys).
Use the "+" and "–" keys to move within the
selection box and select the desired function
(see "Navigation": "+" and "–" keys).
Cooling
In this function, the appliance reduces ambient
temperature until the desired temperature is
reached. The appliance dehumidifies and
purifies the air in the room at the same time in
order to create a pleasant atmosphere.
❏ Plug the appliance into the mains electricity
supply.
❏ Lead the hot air expulsion tube outside,
(see "Preparing the appliance before use").
❏ Check that the plug is fitted onto the water
drainage pipe to prevent water from leaking
onto the support surface.
❏ Lift the air director on the top of the
appliance, Fig. 17.
35
Instructions for Use
90°
0°
Fig. 16
Notes
Do not extend the hot air expulsion tube
more than necessary (maximum length;
140 cm).
Do not form sharp bends when positioning
the tube, otherwise the correct expulsion
of hot air may be impeded. This may cause
a reduction in the cooling power and
performance of the appliance.
In order to achieve maximum cooling
efficiency and minimum noise levels, the
expulsion tube should be fitted above the
total height of the appliance, Fig. 16.
Fig. 17
Warning!
Make sure that the appliance is plugged
into the mains electricity supply.
Selecting the operation function
The following functions can be selected on
your appliance:
❏ cooling .
❏ Turn the appliance on by pressing the "On"
key .
❏ Select the cooling function , (see
"Selecting the operation function").
❏ Select the desired temperature, (see
"Selecting the temperature"). If the
appliance turns itself off automatically, it is
necessary to wait for ambient temperature
to rise 2-3°C before it comes back on again.
❏ Select the operation speed, (see "Selecting
the speed").
Page: 35
36
Instructions for Use
Dehumidification via the removable tank:
• Check that the removable tank is fitted onto
the appliance properly and that the plug is
fitted onto the water drainage pipe to prevent
water from leaking onto the support surface.
• The water level in the removable tank rises.
When it reaches its maximum level, the
symbol appears on the screen. This
symbol also appears when the removable
tank is not properly fitted into its housing.
• In both events, it is necessary to extract the
tank and pour the water carefully down the
nearest drain.
Dehumidification in continuous mode:
• Place a receptacle at the end of the water
drainage pipe to collect the condensed
water or lead the pipe to the nearest drain.
• Remove the plug from the water drainage
pipe on the back at the bottom of the unit.
When operating in this mode, the appliance
does not stop or warn that the external
receptacle is full via the symbol .
• Select the dehumidification function (see
"Selecting the operation function").
• Select the operation speed, (see "Selecting
the speed").
Warnings
The amount of water dehumidified from the
atmosphere may reach 38 litres in 24 hours
depending on atmospheric conditions.
When the appliance is operating in the
dehumidification function, the temperature
does not appear on the screen and cannot
be selected or modified.
Warning!
Do not forget to replace the plug onto the
water drainage pipe when you change
function, otherwise the appliance will shed
water when operated.
Remember that ambient temperature must
be 18°C or higher in order for the appliance
to work.
The appliance expels hot air through the
drainage pipe when operating in
dehumidification function. This is
necessary for the appliance to work more
efficiently in this operation function.
During air conditioning, the condensed water
produced evaporates automatically and is
expelled outdoors together with the expelled
air through the hot air expulsion tube.
In conditions of extreme humidity, the
appliance accumulates condensed water in
the appliance’s rear tank. When a certain level
is reached, the removable tank full symbol
appears on the screen to indicate that the tank
needs to be emptied. The appliance stops
working when this happens. To empty the
removable tank, press the handle and remove
the tank carefully. Empty the water down the
nearest drain.
The symbol disappears from the screen when
the water tank has been emptied and replaced
on the appliance properly.
Warning!
When you turn the appliance back on again
after emptying all of the water, do not
forget to replace the removable tank on the
appliance properly. Should you fail to do
so, the symbol will not disappear from the
screen and the appliance will not work.
Remember that when the appliance is
turned off, it is necessary to wait for
approximately 3 minutes before the
compressor starts up again. This period of
time is required in order to ensure correct
appliance operation.
Dehumidification
In this operation function, the appliance
reduces the humidity in the atmosphere. The
appliance purifies the air in the room at the
same time in order to create a pleasant
atmosphere.
❏ Plug the appliance into the mains electricity
supply.
❏ Fit the hot air expulsion tube outside as
indicated in “Preparing the appliance before
use“.
❏ Lift the air director on the top of the
appliance.
There are two ways of expelling condensed
water: via the removable tank and in
continuous mode.
Page: 36
37
Air purification
The air inside the room (ventilation) is
circulated through a purifying filter (air
purification) when the appliance is set to this
function.
The standard appliance is fitted with a basic
filter and a double active filter (see "Cleaning
and Maintenance") against:
- Smells and smoke.
- Pollen, bacteria and dust.
❏ Plug the appliance into the mains electricity
supply.
❏ Fit the hot air expulsion tube (see
"Preparing the appliance before use").
❏ Lift the air director on the top of the
appliance.
❏ Select the air purification function , (see
"Selecting the operation function").
❏ Select the operation speed, (see "Selecting
the speed").
Warning
We recommend you leave the filters in
position regardless of the function setting
(cooling, dehumidification, air purification)
in order to purify the air more effectively.
Selecting the temperature
This function is only available in the cooling
function.
Place the selection box on the temperature
selection menu (see "up" and "down" keys).
Use the "+" and "–" keys to move within the
selection box until the desired temperature is
reached (see "+" and "–" keys).
The "+" key increases the desired temperature
and the "–" key reduces the desired
temperature.
The temperature selectable ranges from 18°C
to 30°C and can be set to the nearest 1°C.
Keep the key pressed in to increase or
decrease the desired temperature more
quickly.
Selecting the speed
There are two manual speeds (maximum
and silent ) and one automatic
speed available on your appliance. The
automatic speed setting works in maximum or
silent mode depending on room conditions
and the temperature set by the user.
Manual speeds:
Place the selection box on the speed selection
menu (see "up" and "down" keys). Use the "+"
and "–" keys to move within the menu to set
the desired speed (see "+" and "–" keys).
The manual symbol appears on the screen
followed by the last speed set. Press the "+"
and "–" keys to change the speed from
maximum to silent and vice
versa.
Instructions for Use
auto
Automatic speed
Press the auto key on the control panel to
activate this speed. The manual symbol
disappears and the auto symbol is displayed
on the screen.
Press the auto key again to deactivate
automatic speed. The auto symbol disappears
and the appliance returns to the manual speed
previously set.
Page: 37
38
❏ To set the time, it is necessary to turn the
appliance on by pressing the "On" key .
If you take more than 10 seconds to
perform the next operation during
programming / setting the clock on your
appliance, the screen automatically returns
to the main menu and the factory-set
default settings are displayed or, if this is
not the first time that the timer is set, the
last settings used are displayed on the
screen.
These fins are available in all operation
functions: cooling, dehumidification and air
purification.
The side fins close automatically when the
appliance is turned off via the "Off" key.
If the side fins were open prior to turning the
appliance off, they open again when the
appliance is turned back on.
Setting the clock / Programming the
timer
Setting the clock
❏ The current time (24-hour clock) is
displayed in the top left-hand corner of the
screen the first time the appliance is
connected to the mains electricity supply.
0:00 flashes by default.
❏ Press the "Timer" key . The selection
box appears on the timer menu with the last
function selected ("Off" is displayed by
default).
Instructions for Use
Side fins
Your appliance is fitted with side fins which can
be activated to distribute the air more
efficiently.
Press the side fin key to open the fins and
activate their operation. The relevant
symbol is displayed on the screen.
Press the same key again to close the fins.
The symbol disappears from the screen and
the fins close.
❏ Use the "up" key to place the selection box
on the time. The time is modified using the
"+" and "–" keys. The time increases or
decreases by one minute each time one of
these keys is pressed. Keep the key
pressed in to increase or decrease the
minutes more quickly.
Page: 38
❏ The time changes 15 minutes at a time.
❏ Press the "Timer" key , or wait for 10
seconds without touching any keys to
memorise the set start time.
❏ Use the "+" and "–" keys to select the
"Start" function , (see "+" and "–" keys).
❏ Use the "down" key (see "up" and "down"
keys) to lower the cursor to the start time
menu. Then use the "+" and "–" keys to
modify the programmed time until the
desired time is reached.
39
Programming the timer
The appliance needs to be turned on with the
clock set in order to programme the start /
stop times.
Press the "Timer" key , to navigate through
the timer menu. Press the "+" key to
programme the different functions available on
your appliance. These are:
• "Off" : appliance not programmed.
• "Start" : programming the appliance
start time.
• "Start/ Stop" : programming the
appliance start and stop time.
• "Stop" : programming the appliance .
Instructions for Use
❏ Press the "Timer" key , to memorise the
time. If you do not press this key, the time is
automatically memorised when a period of 10
seconds has passed without pressing any key.
The screen returns to the main menu.
10 sec/
Programming the appliance start time
❏ Press the "Timer" key , to position the
cursor on the timer menu. The last function
programmed appears by default
Page: 39
40
❏ Use the "+" and "–" keys to select the
"Start" function , (see "+" and "–" keys).
❏ Use the “down“ key (see “Up“ and “down“
keys) to lower the cursor to the start time
menu. Then use the "+" and "–" keys to
modify the programmed time until the
desired time is reached.
Instructions for Use
Programming the appliance "Start" / "Stop"
timer
❏ Press the "Timer" key , to position the
cursor on the timer menu. The last function
programmed appears by default.
❏ Press the "up" key again to position the
cursor on the timer menu. Use the "+" and "–"
keys to select the "Start" / "Stop" function.
(see "+" and "–" keys).
10 sec/
❏ Use the "down" key to position the cursor
on the stop time menu. Then use the "+"
and "–" keys to modify the stop time until the
desired time is reached.
❏ The time changes 15 minutes at a time.
❏ The set time is displayed on the screen
together with the relevant symbol (the
"Start" symbol ) and the set functions.
❏ Press the "Time" key , or wait for 10
seconds without touching any keys to
memorise the set start / stop times.
❏ The set time is displayed on the screen.
Page: 40
Turning the timer off
❏ Press the "Timer" key , to position the
cursor on the timer menu. The last function
programmed appears by default.
41
Instructions for Use
Programming the appliance stop time
❏ Press the "Timer" key , to position the
cursor on the timer menu. The last function
programmed appears by default.
❏ Use the "+" and "–" keys to select the
"Stop" function , (see "+" and "–" keys).
❏ Use the "down" key (see "up" and "down"
keys) to lower the cursor to the stop time
menu. Then use the "+" and "–" keys to
modify the stop time until the desired time is
reached.
❏ The time changes 15 minutes at a time.
❏ Press the "Timer" key , or wait for 10
seconds without touching any keys to
memorise the set stop time.
❏ The set time is displayed on the screen.
10 sec/
10 sec/
❏ Use the "+" and "–" keys to select the "Off"
function.
❏ Press the "Timer" key , or wait for 10
seconds without touching any keys to turn
the timer off. No set time is displayed on the
screen.
Page: 41
42
Instructions for Use
❏ The times and functions set on the timer
remain active and the programmed
operation is repeated every day at the set
times until deactivated or cancelled as
described above.
10 sec/
Page: 42
43
Cleaning and Maintenance
Cleaning the appliance
❏ For safety reasons, you should unplug the
appliance from the mains electricity supply
before cleaning.
❏ The appliance can be cleaned with a cloth
or sponge, slightly warm water and a mild
detergent.
❏ Never use hot water (more than 40ºC),
bleach, benzene, petrol, acid, scouring
pads, brushes or strong detergents. Prevent
water from entering the appliance.
❏ Do not clean the appliance with a hose..
Cleaning and changing the purifying
filters
Press the side tabs, (Fig. 18, 1.), on the front
flap of the appliance and pull it open (it is not
necessary to remove it), (Fig. 18, 2.). The flap
is fitted with a stop and can be opened up to
this point without risk of falling.
Fig. 18
Washable
basic filter
Fig. 19
All models are fitted with a basic filter which
needs to be cleaned regularly, Fig. 19. The
filter is accessed by pressing the tab at the top
and removing it from its housing, Fig. 20. The
filter is cleaned under a cold tap, dried and
replaced.
Fig. 20
A double active filter is also fitted inside the
basic filter on these models, Fig. 21.
In order to remain operational, this filter needs
to be changed every year or when the
"change filter" symbol appears on the
screen.
(These accessories are available for purchase
from the Manufacturer's Official Technical
Service and authorised distributors).
Press the "+" and the "–" key at the same time
to make the symbol disappear from the
screen after changing the filter. The symbol
disappears from the screen and the filter is
operational again.
Installing the double active filter:
❏ Remove the basic filter from the appliance,
Fig. 20.
❏ Change the double active filter inside the
basic filter for a new one as shown in Fig. 21.
❏ Install the assembly onto the appliance by
lining the lower studs up with the slots on
the front casing of the appliance and
pressing the top clip in until it clicks into
position. The assembly is fitted properly
when it clicks into position.
Fig. 21
Double
active filter
Page: 43
44
Storage requirements
When the appliance is out of use for a long
period, set the expulsion tube to parking
position so that the appliance takes up as little
space as possible.
❏ To do this, bend the tube towards the back
of the appliance and secure it with the
diffusion hook, Figs. 23 and 24.
Prior to use at change of season
❏ Clean the air filter.
❏ Clean the casing and the grilles if
necessary.
Fig. 23
Fig. 24
❏ Close the front flap.
❏ In order to maintain cooling power, only fit
one set of filters onto the support.
Note
The front flap can also be removed in order
to clean the appliance or change the filters
more easily.
To do this, open the flap up to the first stop
(the flap opens to a slight angle; Fig. 18)
and pull outwards. In order to refit it, line
the lower studs on the flap up with the
holes on the casing until the studs meet
the clips on the casing.
Transportation requirements
The appliance is fitted with wheels to make it
easier to move around. It can be tilted, if
necessary, in order to make transportation
easier. You should not turn the appliance back
on again for a minimum period of one hour
after performing this procedure.
❏ Before tilting it, empty the condensed water
from the internal tank by extracting the
water drainage pipe from its housing and
removing the plug, Fig. 22. Place a
receptacle (or the appliance’s removable
tank) at the end of the water drainage pipe
to collect the condensed water or lead the
pipe to the nearest drain. Do not forget to
replace the plug and reinsert the pipe in its
housing when the tank is empty.
Cleaning and Maintenance
Fig. 22
Page: 44
45
Things to check before calling the Technical Service
General requirements for operation
What to do if ...
... the appliance does not work ...
❏ Check that it is plugged in properly.
❏ Check that the mains electricity supply is
working. Check the fuse box.
❏ Set the thermostat to a lower temperature.
... the appliance does not work and the
symbol indicating that the condensed
water tank is full is displayed on the
screen ...
❏ Set the appliance on a flat surface. If the
symbol does not disappear, empty the water
tank. Make sure that the tank is refitted
properly afterwards. (See instructions in
"Cooling").
... the appliance does not reduce room
temperature sufficiently ...
❏ Check the joins on the hot air expulsion
tube.
❏ Make sure that the expulsion tube is not too
bent and that it is not extended to more
than 140 cm.
❏ Make sure that the plug is fitted on the
drainage water pipe.
❏ Fit the suction pad to close the window as
far as possible.
❏ Lower blinds to reduce direct sunlight.
... the fault symbol is displayed on the
screen ...
❏ Get in touch with an authorised dealer,
customer service or the manufacturer’s
Technical Service Network.
... there is water on the control panel grille
or on the basic filter housing ...
❏ There is no cause for concern. This is
normal.
Noise
... the appliance makes a lot of noise ...
❏ Some noise is normal and other types of
noise can be solved easily. You need to be
able to distinguish between these types of
noise:
Perfectly normal noise
❏ The sound of water flowing in cycles is due
to the pump, which circulates the water to
enhance the power of the appliance.
❏ A dull, humming sound is inevitable due to
the compressor.
❏ A faint, whistling sound is due to the
refrigerant passing through the thinner
pipes on the appliance when the
compressor starts up.
❏ A short clicking sound is produced when the
pump connects and disconnects or when
the regulator connects or disconnects the
electronics system.
Easy-to-solve noises
❏ Make sure that the air expulsion tube and
the diffusion and collection sleeves are
fitted properly onto the appliance.
❏ Make sure that the air intakes and outlets
on the appliance are free of obstacles.
❏ Make sure that the appliance is not in direct
contact with furniture or other appliances.
The air output may be flowing directly onto
these and thereby increasing the noise
level.
Any other type of fault or repair work
should be dealt with by a specialised
Technician. Get in touch with your
authorised dealer, customer service or the
Technical Service Network.
Page: 45
Technical service / Warranty / Technical Information
Technical service
Should your appliance fail to work properly and
all the instructions for use and installation
(especially the section headed
"Requirements....") have been carefully
observed, then remember that our Technical
Service Network is at your full disposal.
When contacting the Technical Service, quote
the model code (E-NR) and the appliance’s
factory number (FD). This information can be
found on characteristics plate, Fig. 2.
Warranty
The conditions of warranty depend on the
relevant Supplier in a particular country. Contact
the establishment where you purchased your
appliance for more information and quote the
appliance model and factory number. The receipt
of purchase for the appliance must be produced
prior to any work carried out under warranty.
Technical Information
46
Model PAM20001
Consumption at maximum power (W)* 975
Dehumidification capacity (l./day) 38
Fuse (A) 10
Energy efficiency (letter) C
Consumption at maximum power (W)* 2000
Working range
- Dehumidification (min./max. °C) 18 – 35
- Cooling (min./max. °C) 18 – 35
(*) per EN14511

Question & answers

There are no questions about the Bosch PAM 20001 yet.

Ask a question about the Bosch PAM 20001

Have a question about the Bosch PAM 20001 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Bosch PAM 20001. Please make sure that you describe your difficulty with the Bosch PAM 20001 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.