Bosch GWS 7-115 manual

View a manual of the Bosch GWS 7-115 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Bosch
  • Product: Angle grinder
  • Model/name: GWS 7-115
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian, Swedish, Portuguese, Danish, Polish, Finnish, Czech, Romanian, Turkish, Slovak, Hungarian, Slovene, Croatian

Table of Contents

Page: 10
English | 11
Bosch Power Tools 1 619 P09 529 | (26.5.11)
f When operating a power tool outdoors, use an exten-
sioncord suitablefor outdoor use. Useofa cord suitable
for outdoor use reduces the risk of electric shock.
f If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
Personal safety
f Stay alert, watch what you are doing and use common
sensewhen operating apower tool.Do notuse apower
toolwhileyouaretiredor undertheinfluenceofdrugs,
alcohol or medication. A moment of inattention while op-
erating power tools may result in serious personal injury.
f Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skidsafetyshoes,hardhat,orhearingprotectionused
for appropriate conditions will reduce personal injuries.
f Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/orbatterypack,pickinguporcarryingthetool.Car-
rying power tools with your finger on the switch or energis-
ing power tools that have the switch on invites accidents.
f Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a ro-
tating part of the power tool may result in personal injury.
f Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
f Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
f If devices are provided for the connection of dust ex-
traction and collection facilities, ensure these are con-
nected and properly used. Use of dust collection can re-
duce dust-related hazards.
Power tool use and care
f Donotforcethe powertool.Use thecorrectpower tool
for your application. The correct power tool will do the
job better and safer at the rate for which it was designed.
f Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
f Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
f Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
f Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other
condition thatmay affectthe powertool’s operation.If
damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power
tools.
f Keepcuttingtoolssharpandclean. Properly maintained
cuttingtoolswithsharpcuttingedgesarelesslikelytobind
and are easier to control.
f Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
Service
f Haveyourpowertoolservicedbyaqualifiedrepairper-
son using only identical replacement parts. This will en-
sure that the safety of the power tool is maintained.
Safety Warnings for Angle Grinder
Safety Warnings common for Grinding, Sanding,
WireBrushingorAbrasiveCuttingOffOperations
f This power tool is intended to function as a grinder,
sander, wire brush or cut-off tool. Read all safety warn-
ings, instructions, illustrations and specifications pro-
vided with this power tool. Failure to follow all instruc-
tions listed below may result in electric shock, fire and/or
serious injury.
f This power tool is not recommended for polishing. Op-
erations for which the power tool was not designed may
create a hazard and cause personal injury.
f Do not use accessories which are not specifically de-
signed and recommended by the tool manufacturer.
Justbecausetheaccessory canbeattachedtoyourpower
tool, it does not assure safe operation.
f Theratedspeedoftheaccessorymustbeatleastequal
to the maximum speed marked on the power tool. Ac-
cessories running faster than their rated speed can break
and fly apart.
f The outside diameter and the thickness of your acces-
sory must be within the capacity rating of your power
tool. Incorrectly sized accessories cannot be adequately
guarded or controlled.
f The arbor size of wheels, flanges, backing pads or any
other accessory must properly fit the spindle of the
power tool. Accessories with arbor holes that do not
matchthemountinghardwareofthepowertoolwillrunout
of balance, vibrate excessively and may cause loss of con-
trol.
f Do not use a damaged accessory. Before each use in-
spect the accessory such as abrasive wheels for chips
and cracks, backing pad for cracks, tear or excess
wear, wire brush for loose or cracked wires. If power
tool or accessory is dropped, inspect for damage or in-
stall an undamaged accessory. After inspecting and in-
stallinganaccessory,positionyourselfandbystanders
away from the plane of the rotating accessory and run
the power tool at maximum no-load speed for one
minute. Damaged accessories will normally break apart
during this test time.
OBJ_BUCH-1188-001.book Page 11 Thursday, May 26, 2011 7:48 AM
Page: 11
12 | English
1 619 P09 529 | (26.5.11) Bosch Power Tools
f Wear personal protective equipment. Depending on
application, use face shield, safety goggles or safety
glasses. As appropriate, wear dust mask, hearing pro-
tectors, gloves and workshop apron capable of stop-
ping small abrasive or workpiece fragments. The eye
protection must be capable of stopping flying debris gen-
erated by various operations. The dust mask or respirator
must be capable of filtrating particles generated by your
operation.Prolongedexposure tohighintensitynoisemay
cause hearing loss.
f Keep bystanders a safe distance away from work area.
Anyone entering the work area must wear personal
protective equipment. Fragments of workpiece or of a
broken accessory may fly away and cause injury beyond
immediate area of operation.
f Hold the power tool by insulated gripping surfaces on-
ly, when performing an operation where the cutting ac-
cessory maycontact hidden wiring orits owncord. Cut-
ting accessory contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the op-
erator an electric shock.
f Positionthecord clear of the spinning accessory. If you
lose control of the power tool, the cord may be cut or
snagged and your hand or arm may be pulled into the spin-
ning accessory.
f Never lay the power tool down until the accessory has
come to a complete stop. The spinning accessory may
grabthesurfaceandpullthepowertooloutofyourcontrol.
f Donotrun the power toolwhilecarrying it atyour side.
Accidentalcontactwiththespinningaccessory couldsnag
your clothing, pulling the accessory into your body.
f Regularly clean the power tool’s air vents. The motor’s
fan will draw the dust inside the housing and excessive ac-
cumulation of powdered metal may cause electrical haz-
ards.
f Do not operate the power tool near flammable materi-
als. Sparks could ignite these materials.
f Do not use accessories that require liquid coolants. Us-
ing water or other liquid coolants may result in electrocu-
tion or shock.
Kickback and related warnings
f Kickback is a sudden reaction to a pinched or snagged ro-
tating wheel, backing pad, brush or any other accessory.
Pinching or snagging causes rapid stalling of the rotating
accessory which in turn causes the uncontrolled power
tool to be forced in the direction opposite of the accesso-
ry’s rotation at the point of the binding.
Forexample,ifanabrasivewheelissnaggedorpinchedby
the workpiece, the edge of the wheel that is entering into
the pinch point can dig into the surface of the material
causing the wheel to climb out or kick out. The wheel may
either jump toward or away from the operator, depending
on directionof the wheel’smovementatthepointof pinch-
ing. Abrasive wheels may also break under these condi-
tions.
Kickback is the result of power tool misuse and/or incor-
rect operating procedures or conditions and can be avoid-
ed by taking proper precautions as given below.
f Maintainafirmgriponthepowertoolandpositionyour
body and arm to allow you to resist kickback forces. Al-
ways use auxiliary handle, if provided, for maximum
control over kickback or torque reaction during
start-up. The operator can control torque reactions or
kickback forces, if proper precautions are taken.
f Never place your hand near the rotating accessory. Ac-
cessory may kickback over your hand.
f Do not position your body in the area where power tool
will move if kickback occurs. Kickback will propel the
tool in direction opposite to the wheel’s movement at the
point of snagging.
f Use special care when working corners, sharp edges,
etc. Avoid bouncing and snagging the accessory. Cor-
ners,sharpedgesorbouncinghaveatendencytosnagthe
rotating accessory and cause loss of control or kickback.
f Do not attach a saw chain woodcarving blade or
toothedsawblade.Suchbladescreatefrequentkickback
and loss of control over the power tool.
Safety warnings specific for Grinding and
Abrasive Cutting-Off operations
f Use only wheel types that are recommended for your
power tool and the specific guard designed for the se-
lectedwheel.Wheelsforwhichthepowertoolwas notde-
signed cannot be adequately guarded and are unsafe.
f The guard must be securely attached to the power tool
and positioned for maximum safety, so the least
amount of wheel is exposed towards the operator. The
guard helps to protect operator from broken wheel frag-
ments, accidental contact with wheel and sparks that
could ignite clothing.
f Wheels must be used only for recommended applica-
tions. For example: do not grind with the side of the
cut-off wheel. Abrasive cut-off wheels are intended for
peripheral grinding; side forces applied to these wheels
may cause them to shatter.
f Always use undamaged wheel flanges that are of cor-
rect size and shape for your selected wheel. Proper
wheel flanges support the wheel thus reducing the possi-
bilityofwheelbreakage.Flanges forcut-offwheels maybe
different from grinding wheel flanges.
f Do not use worn down wheels from larger power tools.
Wheels intended for larger power tools are not suitable for
the higher speed of a smaller tool and may burst.
Additional safety warnings specific for abrasive
cutting off operations
f Do not “jam” the cut-off wheel or apply excessive pres-
sure.Donotattempttomakeanexcessivedepthofcut.
Overstressing thewheel increases the loading and suscep-
tibility to twisting or bindingofthe wheelin thecut and the
possibility of kickback or wheel breakage.
OBJ_BUCH-1188-001.book Page 12 Thursday, May 26, 2011 7:48 AM
Page: 12
English | 13
Bosch Power Tools 1 619 P09 529 | (26.5.11)
f Do not position your body in line with and behind the
rotatingwheel.Whenthewheel,atthepointofoperation,
ismovingawayfromyourbody,thepossiblekickbackmay
propel the spinning wheel and the power tool directly at
you.
f When wheel is binding or when interrupting a cut for
any reason, switch off thepower tool andhold the pow-
er tool motionless until the wheel comes to a complete
stop. Never attempt to remove the cut-off wheel from
thecutwhilethewheelisinmotionotherwisekickback
may occur. Investigate and take corrective action to elimi-
nate the cause of wheel binding.
f Do not restart the cutting operation in the workpiece.
Let the wheel reach full speed and carefully re-enter
the cut. The wheel may bind, walk up or kickback if the
power tool is restarted in the workpiece.
f Supportpanelsoranyoversizedworkpiecetominimize
the risk of wheel pinching and kickback. Large work-
pieces tend to sag under their own weight. Supports must
beplacedundertheworkpiecenearthelineofcutandnear
the edge of the workpiece on both sides of the wheel.
f Use extra caution when making a “pocket cut” into ex-
isting walls or other blind areas. The protruding wheel
maycutgasorwaterpipes,electricalwiringorobjectsthat
can cause kickback.
Safety warnings specific for sanding operations
f Do not use excessively oversized sanding disc paper.
Follow manufacturers recommendations, when select-
ing sanding paper. Larger sanding paper extending be-
yond the sanding pad presents a laceration hazard and
may cause snagging, tearing of the disc, or kickback.
Safety warnings specific for wire brushing
operations
f Be aware that wire bristles are thrown by the brush
even during ordinary operation. Do not overstress the
wires by applying excessive load to the brush. The wire
bristles can easily penetrate light clothing and/or skin.
f Iftheuseofaguardisrecommendedforwirebrushing,
do not allow any interference of the wire wheel or
brush with the guard. Wire wheel or brush may expand in
diameter due to work load and centrifugal forces.
Additional Safety and Working
Instructions
f Observecorrectmains voltage!Thevoltage of thepow-
er source must agree with the voltage specified on the
nameplate of the machine. Power tools marked with
230 V can also be operated with 220 V.
f Use suitable detectors to determine if utility lines are
hiddenintheworkareaor callthelocalutilitycompany
for assistance. Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can lead to explo-
sion. Penetrating a water line causes property damage or
may cause an electric shock.
f Release the On/Off switch and set it to the off position
whenthepowersupplyisinterrupted, e. g.,incaseofa
powerfailure or whenthe mains plug is pulled. This pre-
vents uncontrolled restarting.
f Dustsfrommaterialssuchaslead-containingcoatings,
somewoodtypes,mineralsandmetalcanbeharmfulto
one’s health and cause allergic reactions, lead to respi-
ratory infections and/or cancer. Materials containing as-
bestos may only be worked by specialists.
– As far as possible, use a dust extraction system suita-
ble for the material.
– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the
materials to be worked.
f Prevent dust accumulation at the workplace. Dusts can
easily ignite.
f Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
f After breakage of the grinding disc during operation or
damage to the holding fixtures on the protection guard/
power tool,the machinemust promptly be sent to an after-
sales service agent for maintenance (for addresses, see
section „After-sales Service and Customer Assistance“.
f Adjustprotectionguardinsuchamannerthatsparking
toward the operator is prevented.
f Grinding and cutting discs become very hot while
working; do not touch until they have cooled.
f Actuate the spindle lock button only when the grinder
spindle is at a standstill. Otherwise, the machine may be-
come damaged.
f After mounting the grinding tool and before switching
on, check that the grinding tool is correctly mounted
and that it can turn freely. Make sure that the grinding
tool does not graze against the protection guard or oth-
er parts.
f When operating the machine with power from mobile gen-
erators, loss of performance or untypical behavior can oc-
cur upon switching on.
f Byapplyingtoohighapplicationforce,themachinecan
be subject to overload. Overload can lead to overheat-
ing and damage of the power tool. After heavily strain-
ing the power tool, continue to run it at no-load for sev-
eral minutes in order to cool it down.
f Do not use the power tool with a cut-off stand.
f Never use a cutting disc for roughing.
f The quick-clamping nut may be used only for grinding
or cutting discs. Use only a flawless, undamaged quick-
clamping nut.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
OBJ_BUCH-1188-001.book Page 13 Thursday, May 26, 2011 7:48 AM
Page: 13
14 | English
1 619 P09 529 | (26.5.11) Bosch Power Tools
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
ProductssoldinAUSandNZonly:Usearesidualcurrentde-
vice (RCD) with a rated residual current of 30 mA or less.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer
manner.
Delivery Scope
Angle grinder, protection guard, auxiliary handle.
Special protection guards, application tools and other acces-
sories shown or described are not part of the standard deliv-
ery scope.
A complete overview of accessories can be found in our ac-
cessories program.
Symbol Meaning
Article number
Read all safety warnings and all instruc-
tions
Before any work on the machine itself,
pull the mains plug from the socket out-
let
Wear protective gloves
Wear ear protection.
Wear safety glasses/goggles
Movement direction
Apply strength for the workstep.
Low speed
High speed
Switching On
Switching Off
On/Off switch lock-on
Releasing the lock-on function of the
On/Off switch
Prohibited action
Permitted action
Next step of action
P1 Rated power input
P2 Output power
n Rated speed
nv Speed control adjustment
l = Grinder spindle length
d1 = Grinder spindle diameter
D = Max. grinding disc diameter
d2 = Inner disc diameter
Speed preselection
Additional information
Surface grinding
Grinding/sanding with sanding sheet
Weight according to EPTA-Procedure
01/2003
/II Symbol for protection class II
(completely insulated)
LwA Sound power level
LpA Sound pressure level
K Uncertainty
ah Vibration total value
Symbol Meaning
d1
l
d2
D
OBJ_BUCH-1188-001.book Page 14 Thursday, May 26, 2011 7:48 AM
Page: 14
English | 15
Bosch Power Tools 1 619 P09 529 | (26.5.11)
Intended Use
Themachineisintendedforroughingmetal,stoneandceram-
ic materials and for drilling tiles.
For cutting with bonded abrasives, a special cutting guard
(accessory) must be used.
When cutting in stone, provide for sufficient dust extraction.
Together with the hand guard (accessory), the machine can
be used for brushing and grinding/sanding with elastic sand-
ing plates.
The machine is suitable only for working without water.
Technical Data
The technical data of the machine are listed in the Table on
page 219.
The values given are valid for a nominal voltage [U] of 230 V.
For different voltages and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your
machine. The trade names of the individual machines may
vary.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2004/108/EC,
2006/42/EC.
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
05.04.2011
Noise/Vibration Information
The measured values of the machine are listed in the table on
page 219.
Noise and vibrational values (vector sum of three directions)
determined according to EN 60745.
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN60745 and maybeused tocompare one toolwith
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications,withdifferentaccessoriesorpoorlymaintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of thelevelofexposuretovibrationshouldalso
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
fromtheeffectsofvibrationsuchas:maintainthetoolandthe
accessories, keep the hands warm, organisation of work pat-
terns.
Mounting and Operation
Thefollowingtableindicatestheactionobjectivesformountingandoperationofthe powertool. Theinstructions foreachaction
objective are shown aside. Depending on the type of application, various instruction combinations are required. Observe the
safety instructions.
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Head of Product
Certification
Action Figure Please observe Page
Grinding, preparation 1 220 – 221
Cutting, preparation 2 222 – 223
Cutting stone, brick and tiles,
preparation (recommenda-
tion)
3 224 – 225
30°
OBJ_BUCH-1188-001.book Page 15 Thursday, May 26, 2011 7:48 AM
Page: 15
16 | English
1 619 P09 529 | (26.5.11) Bosch Power Tools
Removing paint, preparation 4 226
Removing rust, preparation 5 227
Drilling tiles, preparation 6 228
Mounting the quick-clamping
nut
7 228 – 229
Dismounting the quick-clamp-
ing nut
8 229
Switching On and Off 9 229
Adjusting the speed preselec-
tion
10 230
Working effectively with the
angle grinder
11 231
Grey-marked area: Handle
(insulated gripping surface)
12 231
Selecting the admissible
grinding tool
13 232
Selecting accessories – 233 – 234
Action Figure Please observe Page
OBJ_BUCH-1188-001.book Page 16 Thursday, May 26, 2011 7:48 AM
Page: 16
English | 17
Bosch Power Tools 1 619 P09 529 | (26.5.11)
Maintenance and Cleaning
f For safe and proper working, always keep the machine
and ventilation slots clean.
In extreme conditions, always use dust extraction as far
as possible. Blow out ventilation slots frequently and in-
stall a residual current device (RCD). When working met-
als, conductive dust can settle in the interior of the power
tool. The total insulation of the power tool can be impaired.
Please store and handle the accessory(-ies) carefully.
After-sales Service and Customer
Assistance
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Our customer service representatives can answer your ques-
tions concerning possible applications and adjustment of
products and accessories.
Inallcorrespondenceandsparepartsorder,pleasealwaysin-
clude the 10-digit article number given on the type plate of
the machine.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: +61 (01300) 307 044
Fax: +61 (01300) 307 045
Inside New Zealand:
Phone: +64 (0800) 543 353
Fax: +64 (0800) 428 570
Outside AU and NZ:
Phone: +61 (03) 9541 5555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: +27 (011) 6 51 96 00
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: +27 (011) 4 93 93 75
Fax: +27 (011) 4 93 01 26
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: +27 (031) 7 01 21 20
Fax: +27 (031) 7 01 24 46
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: +27 (021) 5 51 25 77
Fax: +27 (021) 5 51 32 23
E-Mail: bsc@zsd.co.za
Bosch Headquarters
Midrand, Gauteng
Tel.: +27 (011) 6 51 96 00
Fax: +27 (011) 6 51 98 80
E-Mail: rbsa-hq.pts@za.bosch.com
Disposal
Themachine,accessoriesandpackagingshouldbesortedfor
environmental-friendly recycling.
Do not dispose of power tools into household waste!
Only for EC countries:
According the European Guideline
2002/96/EC for Waste Electrical and Elec-
tronic Equipment and its implementation
into national right, power tools that are no
longer usable must be collected separately
and disposed of in an environmentally cor-
rect manner.
Subject to change without notice.
OBJ_BUCH-1188-001.book Page 17 Thursday, May 26, 2011 7:48 AM
Page: 218
| 219
Bosch Power Tools 1 619 P09 529 | (8.6.11)
GWS 7-100
Professional
GWS 7-115
Professional
GWS 7-115 E
Professional
GWS 7-125
Professional
3 601 C88 1.. 3 601 C88 1.. 3 601 C88 2.. 3 601 C88 1..
P1 W 720 720 720 720
n min-1
11000 11000 11000 11000
nv min-1
– – 2800 – 11000 –
l mm 17 22 22 22
d1 M 10 M 14 M 14 M 14
D mm 100 115 115 125
d2 mm 16,0 22,2 22,2 22,2
kg 1,8 1,9 1,9 1,9
– – z –
LwA dB(A) 91 91 91 91
LpA dB(A) 102 102 102 102
K dB 3 3 3 3
ah m/s2
6,5 6,5 6,5 6,5
ah m/s2
3,5 3,5 3,5 3,5
K m/s2
1,5 1,5 1,5 1,5
d1
l
d2
D
OBJ_DOKU-21325-002.fm Page 219 Wednesday, June 8, 2011 9:11 AM
Page: 219
1 619 P09 529 | (26.5.11) Bosch Power Tools
220 |
30˚
1
OBJ_BUCH-1188-001.book Page 220 Thursday, May 26, 2011 7:48 AM
Page: 220
| 221
Bosch Power Tools 1 619 P09 529 | (26.5.11)
OBJ_BUCH-1188-001.book Page 221 Thursday, May 26, 2011 7:48 AM
Page: 221
1 619 P09 529 | (26.5.11) Bosch Power Tools
222 |
2
OBJ_BUCH-1188-001.book Page 222 Thursday, May 26, 2011 7:48 AM
Page: 222
| 223
Bosch Power Tools 1 619 P09 529 | (26.5.11)
OBJ_BUCH-1188-001.book Page 223 Thursday, May 26, 2011 7:48 AM
Page: 223
1 619 P09 529 | (26.5.11) Bosch Power Tools
224 |
3
OBJ_BUCH-1188-001.book Page 224 Thursday, May 26, 2011 7:48 AM
Page: 224
| 225
Bosch Power Tools 1 619 P09 529 | (26.5.11)
OBJ_BUCH-1188-001.book Page 225 Thursday, May 26, 2011 7:48 AM
Page: 225
1 619 P09 529 | (26.5.11) Bosch Power Tools
226 |
4
OBJ_BUCH-1188-001.book Page 226 Thursday, May 26, 2011 7:48 AM
Page: 226
| 227
Bosch Power Tools 1 619 P09 529 | (26.5.11)
5
OBJ_BUCH-1188-001.book Page 227 Thursday, May 26, 2011 7:48 AM
Page: 227
1 619 P09 529 | (26.5.11) Bosch Power Tools
228 |
7
6
OBJ_BUCH-1188-001.book Page 228 Thursday, May 26, 2011 7:48 AM
Page: 228
| 229
Bosch Power Tools 1 619 P09 529 | (26.5.11)
9
8
OBJ_BUCH-1188-001.book Page 229 Thursday, May 26, 2011 7:48 AM
Page: 229
1 619 P09 529 | (26.5.11) Bosch Power Tools
230 |
10
OBJ_BUCH-1188-001.book Page 230 Thursday, May 26, 2011 7:48 AM
Page: 230
| 231
Bosch Power Tools 1 619 P09 529 | (26.5.11)
12
11
OBJ_BUCH-1188-001.book Page 231 Thursday, May 26, 2011 7:48 AM
Page: 231
1 619 P09 529 | (26.5.11) Bosch Power Tools
232 |
max.
[mm] [mm]
D b d [min-1] [m/s]
100
115
125
6
6
6
16,0
22,2
22,2
11000
11000
11000
80
80
80
100
115
125
–
–
–
–
–
–
–
11000
11000
11000
80
80
80
70
75
30
30
M 10
M 14
11000
11000
45
82 M 14 11000 80
45
b
d
D
D
D
b
d
D
d
13
OBJ_BUCH-1188-001.book Page 232 Thursday, May 26, 2011 7:48 AM
Page: 232
| 233
Bosch Power Tools 1 619 P09 529 | (26.5.11)
OBJ_BUCH-1188-001.book Page 233 Thursday, May 26, 2011 7:48 AM
Page: 233
1 619 P09 529 | (26.5.11) Bosch Power Tools
234 |
2 605 703 030 (M 10)
1 605 703 099 (M 14)
1 603 340 031 (M 14)
2 603 340 018 (M 10)
1 603 340 040 (M 14)
1 607 950 040 (M 10)
1 607 950 043 (M 14)
1 619 P06 556
1 619 P06 547
1 619 P06 548
Ø 115 mm
1 619 P06 546
Ø 100 mm
Ø 125 mm
1 619 P06 550
1 619 P06 551
Ø 115 mm
1 619 P06 549
Ø 100 mm
Ø 125 mm
1 602 025 024
1 601 329 013
2 602 025 171
1 601 329 013
1 600 793 007
1 619 P06 514
Ø 100/115/125 mm
OBJ_BUCH-1188-001.book Page 234 Thursday, May 26, 2011 7:48 AM

Question & answers

There are no questions about the Bosch GWS 7-115 yet.

Ask a question about the Bosch GWS 7-115

Have a question about the Bosch GWS 7-115 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Bosch GWS 7-115. Please make sure that you describe your difficulty with the Bosch GWS 7-115 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.