Bosch GWB 10,8-LI Professional manual

View a manual of the Bosch GWB 10,8-LI Professional below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Bosch
  • Product: Screw Machine
  • Model/name: GWB 10,8-LI Professional
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian, Swedish, Portuguese, Danish, Polish, Russian, Norwegian, Finnish, Romanian, Turkish, Slovak, Hungarian, Slovene, Croatian, Ukrainian

Table of Contents

Page: 2
3 |
1 609 92A 00F | (18.12.12) Bosch Power Tools
10,8 V (Li-Ion)
AL 1130 CV
(10,8 V)
2 607 225 134 (EU)
2 607 225 136 (UK)
2 607 225 138 (AU)
AL 1115 CV
(10,8 V)
2 607 225 514 (EU)
2 607 225 516 (UK)
L-BOXX 102
2 608 438 691
OBJ_BUCH-1476-003.book Page 3 Tuesday, December 18, 2012 11:47 AM
Page: 3
1 609 92A 00F | (18.12.12) Bosch Power Tools
4 |
2
3
4
GWB 10,8-LI
1
5
6
7
8
9
OBJ_BUCH-1476-003.book Page 4 Tuesday, December 18, 2012 11:47 AM
Page: 4
5 |
1 609 92A 00F | (18.12.12) Bosch Power Tools
D
C
B
A
3
3
5
8
7
2
10
11
10
OBJ_BUCH-1476-003.book Page 5 Tuesday, December 18, 2012 11:47 AM
Page: 10
English | 11
Bosch Power Tools 1 609 92A 00F | (18.12.12)
Nur für EU-Länder:
Gemäß der europäischen Richtlinie
2002/96/EG müssen nicht mehr ge-
brauchsfähige Elektrowerkzeuge und ge-
mäß der europäischen Richtlinie
2006/66/EG müssen defekte oder ver-
brauchte Akkus/Batterien getrennt gesam-
melt und einer umweltgerechten Wiederverwendung zuge-
führt werden.
Nicht mehr gebrauchsfähige Akkus/Batterien können direkt
abgegeben werden bei:
Deutschland
Recyclingzentrum Elektrowerkzeuge
Osteroder Landstraße 3
37589 Kalefeld
Schweiz
Batrec AG
3752 Wimmis BE
Akkus/Batterien:
Li-Ion:
Bitte beachten Sie die Hinweise im Ab-
schnitt „Transport“, Seite 10.
Änderungen vorbehalten.
English
Safety Notes
General Power Tool Safety Warnings
Read all safety warnings and all in-
structions.Failuretofollowthewarnings
and instructions may result in electric shock, fire and/or seri-
ous injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated(corded) power toolorbattery-operated(cordless)
power tool.
Work area safety
 Keepworkareacleanandwelllit.Clutteredordarkareas
invite accidents.
 Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
 Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical safety
 Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
 Avoidbodycontactwithearthedorgroundedsurfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
 Do not expose power tools to rain or wet conditions.
Waterenteringapowertoolwillincreasetheriskofelectric
shock.
 Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges and moving parts.Damaged
or entangled cords increase the risk of electric shock.
 When operating a power tool outdoors, use an exten-
sioncord suitablefor outdooruse. Use ofa cord suitable
for outdoor use reduces the risk of electric shock.
 If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
Personal safety
 Stay alert, watch what you are doing and use common
sensewhenoperatinga power tool.Do notuse apower
toolwhileyouaretiredorundertheinfluenceofdrugs,
alcohol or medication. A moment of inattention while op-
erating power tools may result in serious personal injury.
 Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal injuries.
 Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack,pickinguporcarrying thetool.Car-
rying power tools with your finger on the switch or energis-
ing power tools that have the switch on invites accidents.
 Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a ro-
tating part of the power tool may result in personal injury.
 Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
 Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from
movingparts. Loose clothes, jewellery or long hair can be
caught in moving parts.
 If devices are provided for the connection of dust ex-
traction and collection facilities, ensure these are con-
nected and properly used. Use of dust collection can re-
duce dust-related hazards.
Power tool use and care
 Donotforcethepowertool.Usethecorrectpowertool
for your application. The correct power tool will do the
job better and safer at the rate for which it was designed.
 Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
WARNING
OBJ_BUCH-1476-003.book Page 11 Tuesday, December 18, 2012 11:47 AM
Page: 11
12 | English
1 609 92A 00F | (18.12.12) Bosch Power Tools
 Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
 Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
 Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other
condition that may affect the power tool’s operation. If
damaged,havethepowertoolrepairedbeforeuse.Many
accidents are caused by poorly maintained power tools.
 Keepcuttingtoolssharpandclean.Properly maintained
cuttingtoolswithsharpcuttingedgesarelesslikelytobind
and are easier to control.
 Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
Battery tool use and care
 Recharge only with the charger specified by the manu-
facturer. A charger that is suitable for one type of battery
pack may create a risk of fire when used with another bat-
tery pack.
 Use power tools only with specifically designated bat-
tery packs. Use of any other battery packs may create a
risk of injury and fire.
 When battery pack is not in use, keep it away from oth-
er metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
 Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addition-
ally seek medical help. Liquid ejected from the battery
may cause irritation or burns.
Service
 Haveyourpowertoolservicedbyaqualifiedrepairper-
son using only identical replacement parts. This will en-
sure that the safety of the power tool is maintained.
Safety Warnings for Drills and Screwdriver
 Use auxiliary handle(s), if supplied with the tool. Loss
of control can cause personal injury.
 Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
or fastener may contact hidden wiring.Cutting accesso-
ry and fasteners contacting a “live” wire may make ex-
posed metal parts of the power tool “live” and could give
the operator an electric shock.
 Use appropriate detectors to determine if utility lines
arehiddenintheworkareaorcallthelocalutilitycompa-
nyforassistance.Contactwithelectriclinescanleadtofire
and electric shock. Damaging a gas line can lead to explo-
sion. Penetrating a water line causes property damage.
 Switchoffthepowertoolimmediatelywhenthetoolin-
sert jams. Be prepared for high reaction torque that
can cause kickback. The tool insert jams when:
— the power tool is subject to overload or
— it becomes wedged in the workpiece.
 Hold the machine with a firm grip. High reaction torque
can briefly occur while driving in and loosening screws.
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
 Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and
moisture. Danger of explosion.
 In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
 Use the battery only in conjunction with your Bosch
power tool. This measure alone protects the battery
against dangerous overload.
 Use only original Bosch batteries with the voltage list-
edonthenameplateofyourpowertool.Whenusingoth-
er batteries, e.g. imitations, reconditioned batteries or
other brands, there is danger of injury as well as property
damage through exploding batteries.
Product Description and Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for driving in and loosening screws
as well as for drilling in wood, metal, ceramic and plastic, es-
pecially at hard to reach locations.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 “PowerLight”
2 Keyless chuck
3 Rotational direction switch
4 On/Off switch
5 Release button for angle selection of drill head
6 Battery charge-control indicator
OBJ_BUCH-1476-003.book Page 12 Tuesday, December 18, 2012 11:47 AM
Page: 12
English | 13
Bosch Power Tools 1 609 92A 00F | (18.12.12)
7 Battery unlocking button*
8 Battery pack*
9 Handle (insulated gripping surface)
10 Screwdriver bit*
11 Universal bit holder*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
17.12.2012
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted sound pressure level of the product
is 72 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values ah (triax vector sum) and uncertainty K
determined according to EN 60745:
Drilling into metal: ah =3.5 m/s2
, K =1.5 m/s2
,
Screwdriving: ah =3.5 m/s2
, K =1.5 m/s2
.
The vibrationemission levelgiveninthis informationsheethas
beenmeasuredinaccordancewithastandardisedtestgivenin
EN 60745 and maybe usedtocompare one toolwith another.
It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
whenitisrunningbutnotactuallydoingthejob.Thismaysignif-
icantly reduce theexposureleveloverthetotal working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
Assembly
Battery Charging (see figure A)
 Useonly the battery chargers listed on the accessories
page. Only these battery chargers are matched to the lith-
ium ion battery of your power tool.
Note: The battery is supplied partially charged. To ensure full
capacity of the battery, completely charge the battery in the
batterychargerbeforeusingyourpowertoolforthefirsttime.
The Lithium-Ion battery can be charged at any time without
reducing its service life. Interrupting the charging procedure
does not damage the battery.
TheLithium-Ionbatteryisprotectedagainstdeepdischarging
by the “ElectronicCell Protection(ECP)”.Whenthe battery is
empty, the machine is switched off by means of a protective
circuit: The inserted tool no longer rotates.
 Do not continue to press the On/Off switch after the
machine has been automatically switched off. The bat-
tery can be damaged.
To remove the battery 8 press the unlocking buttons 7 and
pull out the battery downwards. Do not exert any force.
The battery is equipped with a NTC temperature control
which allows charging only within a temperature range of be-
tween 0 °C and 45 °C. A long battery service life is achieved
in this manner.
Observe the notes for disposal.
Changing the Tool (see figure B)
 Before any work on the machine itself (e. g. mainte-
nance, tool change, etc.) as well as during transport
and storage, remove the battery from the power tool.
There is danger of injury when unintentionally actuating
the On/Off switch.
The drill spindle is locked when the On/Off switch 4 is not
pressed. This makes quick, convenient and easy changing of
the tool in the drill chuck possible.
Open the keyless chuck 2 by turning in rotation direction ,
until the tool can be inserted. Insert the tool.
Firmly tighten the collar of the keyless chuck 2 by hand in ro-
tation direction .
Cordless angle drill/driver GWB 10,8 V-LI
Article number 3 601 C90 9..
Rated voltage V= 10.8
No-load speed min-1
0 – 1300
Max. torque for hard/soft screw-
driving application according to
ISO 5393 Nm 11/3
Max. screw dia. mm 6
Max. drilling dia.
– Steel
– Wood
mm
mm
10
10
Weight according to
EPTA-Procedure 01/2003 kg 1.2
Dr. Egbert Schneider
Senior Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
OBJ_BUCH-1476-003.book Page 13 Tuesday, December 18, 2012 11:47 AM
Page: 13
14 | English
1 609 92A 00F | (18.12.12) Bosch Power Tools
Dust/Chip Extraction
 Dusts from materials such as lead-containing coatings,
some wood types, minerals and metal can be harmful to
one’s health. Touching or breathing-in the dusts can cause
allergic reactions and/or lead to respiratory infections of
the user or bystanders.
Certain dusts, such as oak or beech dust, are considered
as carcinogenic, especially in connection with wood-treat-
ment additives (chromate, wood preservative). Materials
containing asbestos may only be worked by specialists.
– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the
materials to be worked.
 Prevent dust accumulation at the workplace. Dusts can
easily ignite.
Operation
Starting Operation
Inserting the battery
 Use only original Bosch lithium ion batteries with the
voltagelistedonthenameplateofyourpowertool.Using
other batteries can lead to injuries and pose a fire hazard.
Note:Useofbatteriesnotsuitableforthemachinecanleadto
malfunctions of or cause damage to the power tool.
Set the rotational direction switch 3 to the centre position in
order to avoid unintentional starting. Insert the charged bat-
tery8intothehandlesothatitcanbefelt toengageandfaces
flush against the handle.
Reversing the rotational direction (see figure C)
The rotational direction switch 3 is used to reverse the rota-
tional direction of the machine. However, this is not possible
with the On/Off switch 4 actuated.
Right Rotation: For drilling and driving in screws, push the
rotational direction switch 3 left to the stop.
Left Rotation: For loosening or unscrewing screws, push the
rotational direction switch 3 right to the stop.
Switching On and Off
To start the machine, press the On/Off switch 4 and keep it
pressed.
Thepowerlight1lightsupwhentheOn/Offswitch4isslightly
or completely pressed, and allows the work area to be illumi-
nated when lighting conditions are insufficient.
To save energy, only switch the power tool on when using it.
To switch off the machine, release the On/Off switch 4.
Adjusting the Speed
The speed of the switched on power tool can be variably ad-
justed, depending on how far the On/Off switch 4 is pressed.
LightpressureontheOn/Offswitch4resultsinalowrotation-
alspeed.Furtherpressureontheswitchresultsinanincrease
in speed.
Fully automatic spindle locking (Auto-lock)
WhentheOn/Offswitch4is notpressed,thedrill spindle and
thus the tool holder are locked.
Thisenablesscrewstobescrewedin,evenwhenthebattery is
empty and allows for the machine to be used as a screwdriver.
Run-on Brake
When the On/Off switch 4 is released, the chuck brakes to a
stop, thus preventing the run-on of the tool.
When driving in screws, wait until the screw is screwed in
flush with the material and then release the On/Off switch 4.
Bydoingso,theheadofthescrewdoesnotpenetrateintothe
material.
Battery Charge-control Indication
Thebatterycharge-controlindicator6consistsofthreegreen
LEDs, and indicates the charge condition of the battery for a
few seconds when the On/Off switch 4 is pressed halfway or
fully.
Temperature Dependent Overload Protection
When using asintended for, the power toolcannot be subject
tooverload.Whentheloadistoohighortheallowablebattery
temperature of 70 °C is exceeded, the electronic control
switches off the power tool until the temperature is in the op-
timum temperature range again.
Protection Against Deep Discharging
TheLithium-Ionbatteryisprotectedagainstdeepdischarging
by the “ElectronicCell Protection(ECP)”.Whenthe battery is
empty, the machine is switched off by means of a protective
circuit: The inserted tool no longer rotates.
Angle Selection of Drill Head (see figure D)
The drill head can be locked in 5 different angle positions.
Push the release button 5 and swivel the tool head to the re-
quired position. Then, let go of the release button 5 again.
 Before starting operation, check if the drill head is
lockedintherespectiveangleposition.Dangerofinjury.
Working Advice
 Apply the power tool to the screw only when it is
switched off. Rotating tool inserts can slip off.
After longer periods of working at low speed, allow the ma-
chine to cool down by running it for approx. 3 minutes at max-
imum speed with no load.
For drilling in metal, use only perfectly sharpened HSS drill
bits (HSS=high-speed steel). The appropriate quality is guar-
anteed by the Bosch accessories program.
Beforescrewinglarger,longerscrewsintohardmaterials,itis
advisable to predrill a pilot hole with the core diameter of the
thread to approx. 2
/3 of the screw length.
LED Capacity
Continuous lighting 3 x green ≥ 2/3
Continuous lighting 2 x green ≥1/3
Continuous lighting 1 x green < 1/3
Flashing light 1 x green Reserve
OBJ_BUCH-1476-003.book Page 14 Tuesday, December 18, 2012 11:47 AM
Page: 14
English | 15
Bosch Power Tools 1 609 92A 00F | (18.12.12)
Maintenance and Service
Maintenance and Cleaning
 Before any work on the machine itself (e. g. mainte-
nance, tool change, etc.) as well as during transport
and storage, remove the battery from the power tool.
There is danger of injury when unintentionally actuating
the On/Off switch.
 For safe and proper working, always keep the machine
and ventilation slots clean.
When the battery is no longer operative, please refer to an au-
thorised after-sales service agent for Bosch power tools.
If the machine should fail despite the care taken in manufac-
turingandtestingprocedures,repairshouldbecarriedoutby
an after-sales service centre for Bosch power tools.
Inallcorrespondenceandsparepartsorder,pleasealwaysin-
clude the 10-digit article number given on the type plate of
the machine.
After-sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch’sapplicationserviceteamwillgladly answer questions
concerning our products and their accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: (0844) 7360109
Fax: (0844) 7360146
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: (021) 5512577
Fax: (021) 5513223
E-Mail: bsc@zsd.co.za
Bosch Headquarters
Midrand, Gauteng
Tel.: (011) 6519600
Fax: (011) 6519880
E-Mail: rbsa-hq.pts@za.bosch.com
Transport
The contained lithium-ion batteries are subject to the Danger-
ous Goods Legislation requirements. The user can transport
the batteries by road without further requirements.
Whenbeingtransportedbythirdparties(e.g.:airtransportor
forwarding agency), special requirements on packaging and
labelling must be observed. For preparation of the item being
shipped, consulting an expert for hazardous material is re-
quired.
Dispatch batteries only when the housing is undamaged.
Tape or mask off open contacts and pack up the battery in
such a manner that it cannot move around in the packaging.
Please also observe possibly more detailed national regula-
tions.
OBJ_BUCH-1476-003.book Page 15 Tuesday, December 18, 2012 11:47 AM

Question & answers

There are no questions about the Bosch GWB 10,8-LI Professional yet.

Ask a question about the Bosch GWB 10,8-LI Professional

Have a question about the Bosch GWB 10,8-LI Professional but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Bosch GWB 10,8-LI Professional. Please make sure that you describe your difficulty with the Bosch GWB 10,8-LI Professional as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.