Bosch GST Professional 140CE manual

View a manual of the Bosch GST Professional 140CE below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Bosch
  • Product: Saw
  • Model/name: GST Professional 140CE
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian, Swedish, Portuguese, Danish, Polish

Table of Contents

Page: 8
English | 9
Bosch Power Tools 2 609 932 830 | (12.12.11)
Entsorgung
Elektrowerkzeuge, Zubehör und Verpackungen sollen einer
umweltgerechten Wiederverwertung zugeführt werden.
Werfen Sie Elektrowerkzeuge nicht in den Hausmüll!
Nur für EU-Länder:
Gemäß der Europäischen Richtlinie
2002/96/EG über Elektro- und Elektronik-
AltgeräteundihrerUmsetzunginnationales
Recht müssen nicht mehr gebrauchsfähige
Elektrowerkzeuge getrennt gesammelt und
einer umweltgerechten Wiederverwertung
zugeführt werden.
Änderungen vorbehalten.
English
General Power Tool Safety Warnings
Read all safety warnings and all in-
structions.Failuretofollowthewarnings
and instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated(corded)power toolor battery-operated (cordless)
power tool.
Work area safety
f Keepworkareacleanandwelllit.Clutteredordarkareas
invite accidents.
f Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
f Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical safety
f Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
f Avoidbodycontactwithearthedorgroundedsurfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
f Do not expose power tools to rain or wet conditions.
Waterenteringapowertoolwillincreasetheriskofelectric
shock.
f Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges and moving parts. Damaged
or entangled cords increase the risk of electric shock.
f When operating a power tool outdoors, use an exten-
sioncordsuitableforoutdooruse. Useofacordsuitable
for outdoor use reduces the risk of electric shock.
f If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
Personal safety
f Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
toolwhileyouaretiredorundertheinfluenceofdrugs,
alcohol or medication. A moment of inattention while op-
erating power tools may result in serious personal injury.
f Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal injuries.
f Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/orbatterypack,picking uporcarryingthetool. Car-
rying power tools with your finger on the switch or energis-
ing power tools that have the switch on invites accidents.
f Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a ro-
tating part of the power tool may result in personal injury.
f Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
f Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
f If devices are provided for the connection of dust ex-
traction and collection facilities, ensure these are con-
nected and properly used. Use of dust collection can re-
duce dust-related hazards.
Power tool use and care
f Donot forcethepowertool. Usethecorrect powertool
for your application. The correct power tool will do the
job better and safer at the rate for which it was designed.
f Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
f Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
f Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
f Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other
condition that may affect the power tool’s operation. If
damaged,havethepowertoolrepairedbeforeuse.Many
accidents are caused by poorly maintained power tools.
WARNING
OBJ_BUCH-1320-003.book Page 9 Monday, December 12, 2011 10:15 AM
Page: 9
10 | English
2 609 932 830 | (12.12.11) Bosch Power Tools
f Keepcuttingtoolssharpandclean. Properlymaintained
cuttingtoolswithsharpcuttingedgesarelesslikelytobind
and are easier to control.
f Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
Service
f Haveyourpowertoolservicedbyaqualifiedrepairper-
son using only identical replacement parts. This will en-
sure that the safety of the power tool is maintained.
Safety Warnings for Jigsaws
f Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
may contact hidden wiring or its own cord. Cutting ac-
cessory contacting a “live” wire may make exposed metal
partsofthepowertool“live”andcouldgivetheoperatoran
electric shock.
Additional Safety and Working
Instructions
f Keep hands away from the sawing range. Do not reach
undertheworkpiece.Contactwiththesawbladecanlead
to injuries.
f Apply the machine to the workpiece only when
switched on. Otherwise there is danger of kickback when
the cutting tool jams in the workpiece.
f Pay attention that the base plate rests securely on the
material while sawing. A jammed saw blade can break or
lead to kickback.
f When the cut is completed, switch off the machine and
then pull the saw blade out of the cut only after it has
come to a standstill. In this manner you can avoid kick-
back and can place down the machine securely.
f Useonlyundamagedsawbladesthatareinperfectcon-
dition. Bent or dull saw blades can break, negatively influ-
ence the cut, or lead to kickback.
f Do not brake the saw blade to a stop by applying side
pressure after switching off. The saw blade can be dam-
aged, break or cause kickback.
f Use suitable detectors to determine if utility lines are
hiddenintheworkareaorcallthelocalutilitycompany
for assistance. Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can lead to explo-
sion. Penetrating a water line causes property damage or
may cause an electric shock.
f Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
f Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
f Before any work on the machine itself, pull the mains
plug.
f Do not direct the light beam at persons or animals and
donotstareintothelightbeamyourself(notevenfrom
a distance).
f Check the tight seating of the saw blade. A loose saw
blade can fall out and lead to injuries.
f The saw blade should not be longer than required for
the intended cut. Use a narrow saw blade when sawing
tight curves.
f When ejecting the saw blade, hold the machine in such
a manner that no persons or animals can be injured by
the ejected saw blade.
f Dustsfrommaterialssuchaslead-containingcoatings,
somewoodtypes,mineralsandmetalcanbeharmfulto
one’s health and cause allergic reactions, lead to respi-
ratory infections and/or cancer. Materials containing as-
bestos may only be worked by specialists.
– Asfaraspossible,useadustextractionsystemsuitable
for the material.
– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the
materials to be worked.
f Prevent dust accumulation at the workplace. Dusts can
easily ignite.
f Observe correct mains voltage!Thevoltageofthepow-
er source must agree with the voltage specified on the
nameplate of the machine. Power tools marked with
230 V can also be operated with 220 V.
f The restarting protection prevents uncontrolled start-
ing of the machine after a power failure. To restart the
machine, set the On/Off switch to the off position, and
then switch the power tool on again.
f The contact protector attached to the casing (see fig-
ure 17, page 188) prevents accidental touching of the
saw blade during the working procedure and may not
be removed.
f Before sawing in wood, particle boards, building mate-
rials etc., check for foreign objects, such as nails,
screws, etc. and remove them as required.
f Plunge cuts may only be applied to soft materials, such
as wood, gypsum board, etc. For plunge cuts, use only
short saw blades.
f Themetalovershoepreventstheplasticfootplatefrom
being scratched up, especially when sawing metal.
f Adapt the settings of your power tool to the respective
application. For example, reduce the stroke rate and or-
bital action when cutting metal or for tight curved cuts.
f When working small or thin work pieces, always use a
sturdy support or a saw table (accessory).
f In extreme conditions, always use dust extraction as far
as possible. Blow out ventilation slots frequently and in-
stall a residual current device (RCD). When working met-
als, conductive dust can settle in the interior of the power
tool. The total insulation of the power tool can be impaired.
OBJ_BUCH-1320-003.book Page 10 Monday, December 12, 2011 10:15 AM
Page: 10
English | 11
Bosch Power Tools 2 609 932 830 | (12.12.11)
f Products sold in GB only: Your product is fitted with an
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
Iftheplugisnotsuitableforyoursocketoutlets,itshouldbe
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only: Use a residual current
device (RCD) with a rated residual current of 30 mA or less.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer
manner.
Symbol Meaning
GST 140 CE: Jigsaw with constant
electronic control
Grey-marked area: Handle
(insulated gripping surface)
GST 140 BCE: Jigsaw with constant
electronic and bow handle
Grey-marked area: Handle
(insulated gripping surface)
Read all safety warnings and all
instructions
Before any work on the machine
itself, pull the mains plug from the
socket outlet
Wear protective gloves
Additional information
Movement direction
Reaction direction
Next step of action
Sawdust blower device
Extraction
Mitre/Bevel Angle
Low stroke rate/speed
High stroke rate/speed
Switching On
Switching Off
On/Off switch lock-on
Worklight
Prohibited action
Correct result
Saw with moderate pressure in
ordertoachieveoptimalandprecise
cutting results.
When sawing metal, apply coolant/
ubricant alongside the cutting line
Article number (10-digit)
P1 Rated power input
n0 Stroke rate at no-load
Cutting depth, max.
Wood
Aluminium
Metal
Particle board
Weight according to
EPTA-Procedure 01/2003
Symbol Meaning
OBJ_BUCH-1320-003.book Page 11 Monday, December 12, 2011 10:15 AM
Page: 11
12 | English
2 609 932 830 | (12.12.11) Bosch Power Tools
Delivery Scope
Jigsaw, splinter guard and extraction kit.
Parallel guide, metal overshoe, application tools and other
accessories shown or described are not part of the standard
delivery scope.
A complete overview of accessories can be found in our
accessories program.
Intended Use
The machine is intended for making separating cuts and cut-
outs in wood, plastic, metal, ceramic plates and rubber while
resting firmly on the workpiece. It is suitable for straight and
curved cuts with mitre angles to 45°. The saw blade recom-
mendations are to be observed.
Technical Data
The technical data of the machine are listed in the table on
page 176.
The values given are valid for a nominal voltage [U] of 230 V.
For different voltages and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your
machine. The trade names of the individual machines may
vary.
Declaration of Conformity
We declare under our sole responsibility that the product
describedunder“TechnicalData”isinconformitywiththefol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 11.11.2011
Noise/Vibration Information
The measured values of the machine are listed in the table on
page 176.
Noise and vibrational values (vector sum of three directions)
determined according to EN 60745.
Thevibrationemissionlevelgiveninthisinformationsheethas
beenmeasuredinaccordancewithastandardisedtestgivenin
EN 60745 and may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
whenitisrunningbutnotactuallydoingthejob.Thismaysignif-
icantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
Mounting and Operation
Thefollowingtableindicatestheactionobjectivesformounting andoperationofthepowertool. Theinstructionsforeachaction
objective are shown aside. Depending on the type of application, various instruction combinations are required. Observe the
safety instructions.
/II Symbol for protection class II
(completely insulated)
LpA Sound pressure level
LwA Sound power level
K Uncertainty
ah Vibration total value
Handle
Gear head
Symbol Meaning
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Engineering Director
PT/ESI
Action Figure Please observe Page
Inserting the Saw Blade 1 177
Ejecting the Saw Blade 2 177
OBJ_BUCH-1320-003.book Page 12 Monday, December 12, 2011 10:15 AM
Page: 12
English | 13
Bosch Power Tools 2 609 932 830 | (12.12.11)
Adjusting the footplate 3 177–178
Switching on the sawdust blower
device
4 179
Connecting the dust extraction 5 179–180
Adjusting the Cutting Angle 6 180–181
Mounting the metal overshoe 7 182
Mounting the splinter guard 8 182
Orbital Action Settings 9 183
Adjusting the stroke rate
preselection
10 183–184
Switching the Power Tool On/Off 11 184–185
Guide the power tool toward the
workpiece only when switched on
12 185
Switching the worklight On/Off 13 185–186
Lubrication when cutting metal 14 186
Plunge Cutting 15 186–187
Action Figure Please observe Page
90°
OBJ_BUCH-1320-003.book Page 13 Monday, December 12, 2011 10:15 AM
Page: 13
14 | English
2 609 932 830 | (12.12.11) Bosch Power Tools
Maintenance and Cleaning
f For safe and proper working, always keep the machine
and the ventilation slots as well as the tool holder clean.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in
order to avoid a safety hazard.
Cleanthesawbladeholderregularly.Forthis,removethesaw
blade from the machine and lightly tap out the machine on a
level surface.
Regularlyspraypenetratingoilontothesawbladeholder(see
figure 18, page 189).
Check the guide roller regularly. If worn, it must be replaced
through an authorised Bosch after-sales service agent.
Lubricate the guide roller occasionally with a drop of oil (see
figure 19, page 189).
After-sales Service and Customer
Assistance
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can
also be found under:
www.bosch-pt.com
Our customer service representatives can answer your ques-
tions concerning possible applications and adjustment of
products and accessories.
In all correspondence and spare parts order, please always
include the 10-digit article number given on the type plate of
the machine.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: +61 (01300) 307 044
Fax: +61 (01300) 307 045
Inside New Zealand:
Phone: +64 (0800) 543 353
Fax: +64 (0800) 428 570
Outside AU and NZ:
Phone: +61 (03) 9541 5555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: +27 (011) 6 51 96 00
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: +27 (011) 4 93 93 75
Fax: +27 (011) 4 93 01 26
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: +27 (031) 7 01 21 20
Fax: +27 (031) 7 01 24 46
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: +27 (021) 5 51 25 77
Fax: +27 (021) 5 51 32 23
E-Mail: bsc@zsd.co.za
Bosch Headquarters
Midrand, Gauteng
Tel.: +27 (011) 6 51 96 00
Fax: +27 (011) 6 51 98 80
E-Mail: rbsa-hq.pts@za.bosch.com
Mounting and use of the parallel
guide
16 187–188
Selecting accessories – 190–192
Action Figure Please observe Page
OBJ_BUCH-1320-003.book Page 14 Monday, December 12, 2011 10:15 AM
Page: 14
English | 15
Bosch Power Tools 2 609 932 830 | (12.12.11)
People’s Republic of China
China Mainland
Bosch Power Tools (China) Co., Ltd.
567, Bin Kang Road
Bin Jiang District 310052
Hangzhou, P.R.China
Service Hotline: 400 826 8484
Fax: +86 571 8777 4502
E-Mail: contact.ptcn@cn.bosch.com
www.bosch-pt.com.cn
HK and Macau Special Administrative Regions
Robert Bosch Hong Kong Co. Ltd.
21st Floor, 625 King’s Road
North Point, Hong Kong
Customer Service Hotline: +852 2101 0235
Fax: +852 2590 9762
E-Mail: info@hk.bosch.com
www.bosch-pt.com.hk
Indonesia
PT. Multi Mayaka
Kawasan Industri Pulogadung
Jalan Rawa Gelam III No. 2
Jakarta 13930
Indonesia
Tel.: +62 (21) 46 83 25 22
Fax: +62 (21) 46 82 86 45/68 23
E-Mail: sales@multimayaka.co.id
www.bosch-pt.co.id
Philippines
Robert Bosch, Inc.
28th Floor Fort Legend Towers,
3rd Avenue corner 31st Street,
Fort Bonifacio Global City,
1634 Taguig City, Philippines
Tel.: +63 (2) 870 3871
Fax: +63 (2) 870 3870
matheus.contiero@ph.bosch.com
www.bosch-pt.com.ph
Bosch Service Center:
9725-27 Kamagong Street
San Antonio Village
Makati City, Philippines
Tel.: +63 (2) 899 9091
Fax: +63 (2) 897 6432
rosalie.dagdagan@ph.bosch.com
Malaysia
Robert Bosch (S.E.A.) Sdn. Bhd.
No. 8A, Jalan 13/6
G.P.O. Box 10818
46200 Petaling Jaya
Selangor, Malaysia
Tel.: +60 (3) 7966 3194
Fax: +60 (3) 7958 3838
cheehoe.on@my.bosch.com
Toll-Free: 1800 880 188
www.bosch-pt.com.my
Thailand
Robert Bosch Ltd.
Liberty Square Building
No. 287, 11 Floor
Silom Road, Bangrak
Bangkok 10500
Tel.: +66 (2) 6 31 18 79 – 18 88 (10 lines)
Fax: +66 (2) 2 38 47 83
Robert Bosch Ltd., P. O. Box 2054
Bangkok 10501, Thailand
Bosch Service – Training Centre
2869-2869/1 Soi Ban Kluay
Rama IV Road (near old Paknam Railway)
Prakanong District
10110 Bangkok
Thailand
Tel.: +66 (2) 6 71 78 00 – 4
Fax: +66 (2) 2 49 42 96
Fax: +66 (2) 2 49 52 99
Singapore
Robert Bosch (SEA) Pte. Ltd.
11 Bishan Street 21
Singapore 573943
Tel.: +65 6571 2772
Fax: +65 6350 5315
leongheng.leow@sg.bosch.com
Toll-Free: 1800 333 8333
www.bosch-pt.com.sg
Vietnam
Robert Bosch Vietnam Co. Ltd
10/F, 194 Golden Building
473 Dien Bien Phu Street
Ward 25, Binh Thanh District
84 Ho Chi Minh City
Vietnam
Tel.: +84 (8) 6258 3690 ext. 413
Fax: +84 (8) 6258 3692
hieu.lagia@vn.bosch.com
www.bosch-pt.com
Disposal
Themachine,accessoriesandpackagingshouldbesortedfor
environmental-friendly recycling.
Do not dispose of power tools into household waste!
Only for EC countries:
According to the European Guideline
2002/96/EC for Waste Electrical and Elec-
tronic Equipment and its implementation
into national right, power tools that are no
longer usable must be collected separately
and disposed of in an environmentally cor-
rect manner.
Subject to change without notice.
OBJ_BUCH-1320-003.book Page 15 Monday, December 12, 2011 10:15 AM
Page: 175
176 |
2 609 932 830 | (12.12.11) Bosch Power Tools
GST 140 CE
Professional
GST 140 BCE
Professional
3 601 E14 0.. 3 601 E15 0..
P1 W 720 720
n0 min-1
800–2800 800–2800
mm 140 140
mm 20 20
mm 10 10
kg 2,2 2,3
LpA dB(A) 82 82
LwA dB(A) 93 93
K dB 3 3
ah m/s2
6,0 7,0
K m/s2
1,5 1,5
ah m/s2
8,5 –
K m/s2
1,5 –
ah m/s2
5,0 6,5
K m/s2
1,5 1,5
ah m/s2
9,0 –
K m/s2
1,5 –
OBJ_BUCH-1320-003.book Page 176 Monday, December 12, 2011 10:06 AM
Page: 176
| 177
Bosch Power Tools 2 609 932 830 | (12.12.11)
3
2
1
1
2
90°
1
2
OBJ_BUCH-1320-003.book Page 177 Monday, December 12, 2011 10:06 AM
Page: 177
2 609 932 830 | (12.12.11) Bosch Power Tools
178 |
1
2
+40°
–40°
+40°
–40°
2
T 144 D
T 244 D
1
3
OBJ_BUCH-1320-003.book Page 178 Monday, December 12, 2011 10:06 AM
Page: 178
| 179
Bosch Power Tools 2 609 932 830 | (12.12.11)
5
4
OBJ_BUCH-1320-003.book Page 179 Monday, December 12, 2011 10:06 AM
Page: 179
2 609 932 830 | (12.12.11) Bosch Power Tools
180 |
6
1
2
OBJ_BUCH-1320-003.book Page 180 Monday, December 12, 2011 10:06 AM
Page: 180
| 181
Bosch Power Tools 2 609 932 830 | (12.12.11)
±45° 1
3
2
2
1
OBJ_BUCH-1320-003.book Page 181 Monday, December 12, 2011 10:06 AM
Page: 181
2 609 932 830 | (12.12.11) Bosch Power Tools
182 |
8
7
OBJ_BUCH-1320-003.book Page 182 Monday, December 12, 2011 10:06 AM
Page: 182
| 183
Bosch Power Tools 2 609 932 830 | (12.12.11)
10
9
GST 140 BCE
OBJ_BUCH-1320-003.book Page 183 Monday, December 12, 2011 10:06 AM
Page: 183
2 609 932 830 | (12.12.11) Bosch Power Tools
184 |
11
1
2
3
GST 140 BCE
GST 140 CE
OBJ_BUCH-1320-003.book Page 184 Monday, December 12, 2011 10:06 AM
Page: 184
| 185
Bosch Power Tools 2 609 932 830 | (12.12.11)
13
12
GST 140 BCE
1
2
1
2
GST 140 CE
OBJ_BUCH-1320-003.book Page 185 Monday, December 12, 2011 10:06 AM
Page: 185
2 609 932 830 | (12.12.11) Bosch Power Tools
186 |
15
14
6
max. 80 mm
2
1
GST 140 CE
OBJ_BUCH-1320-003.book Page 186 Monday, December 12, 2011 10:06 AM
Page: 186
| 187
Bosch Power Tools 2 609 932 830 | (12.12.11)
16
1
3
2
1
2
OBJ_BUCH-1320-003.book Page 187 Monday, December 12, 2011 10:06 AM
Page: 187
2 609 932 830 | (12.12.11) Bosch Power Tools
188 |
17
OBJ_BUCH-1320-003.book Page 188 Monday, December 12, 2011 10:06 AM
Page: 188
| 189
Bosch Power Tools 2 609 932 830 | (12.12.11)
19
18
OBJ_BUCH-1320-003.book Page 189 Monday, December 12, 2011 10:06 AM
Page: 189
2 609 932 830 | (12.12.11) Bosch Power Tools
190 |
T 144 D
T 244 D
T 144 DP
T 101 B
T 308 B
T 308 BF
T 101 BIF
T 118 B
T 123 X
T 127 D
T 345 XF
OBJ_BUCH-1320-003.book Page 190 Monday, December 12, 2011 10:06 AM
Page: 191
2 609 932 830 | (12.12.11) Bosch Power Tools
192 |
GAS 25
GAS 50
GAS 50 M
Ø 19 mm
2 607 002 161 (3 m)
2 607 002 162 (5 m)
OBJ_BUCH-1320-003.book Page 192 Monday, December 12, 2011 10:06 AM

Question & answers

There are no questions about the Bosch GST Professional 140CE yet.

Ask a question about the Bosch GST Professional 140CE

Have a question about the Bosch GST Professional 140CE but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Bosch GST Professional 140CE. Please make sure that you describe your difficulty with the Bosch GST Professional 140CE as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.