Bosch GSR ProDrive manual

View a manual of the Bosch GSR ProDrive below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Bosch
  • Product: Screw Machine
  • Model/name: GSR ProDrive
  • Filetype: PDF
  • Available languages: English, French, Chinese, Indonesian

Table of Contents

Page: 0
Robert Bosch GmbH
Power Tools Division
70745 Leinfelden-Echterdingen
www.bosch-pt.com
1 609 929 R41 (2008.05) O / 64 ASIA
GSR ProDrive Professional
us Original operating instructions
cn 正本使用说明书
tw 正本使用說明書
ko 사용 설명서 원본
th หนังสือคู่มือการใช้งานฉบับต้นแบบ
id Petunjuk-Petunjuk untuk
Penggunaan Orisinal
vn BΩng hõëng dÿn nguy›n bΩn
fr Notice originale
ar
fa
ΕΎϤϴϠόΗ
ϞϴϐθΘϟ΍
ΔϴϠλϷ΍
̶Ϡλ΍ έΎ̯ ίήσ ̵ΎϤϨϫ΍έ
OBJ_DOKU-13202-002.fm Page 1 Monday, May 26, 2008 11:43 AM
Page: 1
1 609 929 R41 | (26.5.08) Bosch Power Tools
2 |
English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6
中文. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 页 13
中文. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 頁 18
한국어. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .면 23
ภาษาไทย. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . หน้า 28
Bahasa Indonesia . . . . . . . . . . . . . . . . . . Halaman 34
Tiøng Vi·t. . . . . . . . . . . . . . . . . . . . . . . . . . . .Trang 41
Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 47
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
v
v
v
v


c
c
c
c



 ΔΤϔλ
vÝ—U ϪΤϔλ
OBJ_BUCH-771-002.book Page 2 Monday, May 26, 2008 11:35 AM
Page: 2
3 |
1 609 929 R41 | (26.5.08) Bosch Power Tools
3,6 V (Li-Ion)
2 607 336 242
AL 1115 CV
(3,6 – 10,8 V)
2 607 225 514 (HK, MY, SG)
2 607 225 516 (Far East, IN)
2 607 225 518 (AU)
2 607 225 522 (TW)
2 607 225 556 (KR)
2 607 225 529 (CN)
OBJ_BUCH-771-002.book Page 3 Monday, May 26, 2008 11:35 AM
Page: 3
4 |
1 609 929 R41 | (26.5.08) Bosch Power Tools
3
4
1
2
7 6 5
GSR ProDrive
Professional
OBJ_BUCH-771-002.book Page 4 Monday, May 26, 2008 11:35 AM
Page: 4
5 |
1 609 929 R41 | (26.5.08) Bosch Power Tools
C
B
A
4
3
1
2
1
6
6
OBJ_BUCH-771-002.book Page 5 Monday, May 26, 2008 11:35 AM
Page: 5
1 609 929 R41 | (26.5.08) Bosch Power Tools
6 | English
us
General Power Tool Safety
Warnings
Read all safety warnings and all
instructions. Failure to follow
the warnings and instructions may result in elec-
tric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Clut-
tered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power
tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed
(grounded) power tools. Unmodified
plugs and matching outlets will reduce the
risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes, radia-
tors, ranges and refrigerators. There is an
increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool
will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat,
oil, sharp edges or moving parts. Dam-
aged or entangled cords increase the risk
of electric shock.
e) When operating a power tool outdoors,
use an extension cord suitable for out-
door use. Use of a cord suitable for out-
door use reduces the risk of electric shock.
f) If operating a power tool in a damp loca-
tion is unavoidable, use a ground fault cir-
cuit interrupter (GFCI) or an earth leak-
age circuit breaker (ELCB). Use of a GFCI
or an ELCB reduces the risk of electric
shock.
3) Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol, or medication. A moment
of inattention while operating power tools
may result in serious personal injury.
b) Use personal protective equipment. Al-
ways wear eye protection. Protective
equipment such as dusk mask, non-skid
safety shoes, hard hat or hearing protec-
tion used for appropriate conditions will
reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off position before
connecting to power source and/or bat-
tery pack, picking up or carrying the tool.
Carrying power tools with your finger on
the switch or energizing power tools that
have the switch on invites accidents.
d) Remove any adjusting key or wrench be-
fore turning the power tool on. A wrench
or a key that is left attached to a rotating
part of the power tool may result in per-
sonal injury.
e) Do not overreach. Keep proper footing
and balance at all times. This enables bet-
ter control of the power tool in unexpected
situations.
f) Dress properly. Do not wear loose cloth-
ing or jewelry. Keep your hair, clothing,
and gloves away from moving parts.
Loose clothes, jewelry, or long hair can be
caught in moving parts.
WARNING
OBJ_BUCH-771-002.book Page 6 Monday, May 26, 2008 11:35 AM
Page: 6
English | 7
Bosch Power Tools 1 609 929 R41 | (26.5.08)
g) If devices are provided for the connection
of dust extraction and collection facili-
ties, ensure these are connected and
properly used. Use of dust collection can
reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the cor-
rect power tool for your application. The
correct power tool will do the job better
and safer at the rate for which it is de-
signed.
b) Do not use the power tool if the switch
does not turn it on or off. Any power tool
that cannot be controlled with the switch
is dangerous and must be repaired.
c) Disconnect the plug from the power
source and/or the battery pack from the
power tool before making any adjust-
ments, changing accessories, or storing
power tools. Such preventive safety mea-
sures reduce the risk of starting the power
tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfa-
miliar with the power tool or these in-
structions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for misalign-
ment or binding of moving parts, break-
age of parts and any other condition that
may affect the power tool’s operation. If
damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean. Prop-
erly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories, tool bits
etc. in accordance with these instruc-
tions, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations differ-
ent from those intended could result in a
hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of fire when used with anoth-
er battery pack.
b) Use power tools only with specifically
designated battery packs. Use of any oth-
er battery packs may create a risk of injury
and fire.
c) When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a con-
nection from one terminal to another.
Shorting the battery terminals together
may cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with
water. In liquid contacts eyes, additional-
ly seek medical help. Liquid ejected from
the battery may cause irritation or burns.
6) Service
a) Have your power tool serviced by a quali-
fied repair person using only identical re-
placement parts. This will ensure that the
safety of the power tool is maintained.
Power Tool-specific Safety
Warnings
f Hold the power tool with a firm grip. High re-
action torque can briefly occur while driving in
and loosening screws.
f Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
f Avoid unintentional switching on. Ensure the
On/Off switch is in the off position before in-
serting battery pack. Carrying the power tool
with your finger on the On/Off switch or in-
serting the battery pack into power tools that
have the switch on invites accidents.
OBJ_BUCH-771-002.book Page 7 Monday, May 26, 2008 11:35 AM
Page: 7
1 609 929 R41 | (26.5.08) Bosch Power Tools
8 | English
f Do not open the battery. Danger of short-cir-
cuiting.
Protect the battery against heat, e.g., al-
so against continuous sun irradiation and
fire. There is danger of explosion.
f In case of damage and improper use of the
battery, vapors may be emitted. Provide for
fresh air and seek medical help in case of
complaints. The vapors can irritate the respi-
ratory system.
f When the battery is defective, liquid can es-
cape and come into contact with adjacent
components. Check any parts concerned.
Clean such parts or replace them, if required.
f Use the battery only in conjunction with your
Bosch power tool. This measure alone pro-
tects the battery against dangerous overload.
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
While reading the operating instructions, unfold
the graphics page for the tool and leave it open.
Intended Use
The machine is intended for driving in and loos-
ening screws.
Product Features
The numbering of the product features refers to
the illustration of the power tool on the graphics
page.
1 Screwdriver bit*
2 Tool holder
3 Battery release button
4 Battery*
5 On/Off switch
6 Rotational direction switch
7 “Power Light”
*The accessories illustrated or described are not in-
cluded as standard delivery.
Technical Data
Assembly
Battery Charging (see figure A)
f Use only the battery chargers listed on the
accessories page. Only these battery charg-
ers are matched to the lithium ion battery of
your power tool.
Note: The battery is supplied partially charged.
To ensure full capacity of the battery, completely
charge the battery in the battery charger before
using your power tool for the first time.
The lithium ion battery can be charged at any
time without reducing its service life. Interrupt-
ing the charging procedure does not damage the
battery.
The lithium ion battery is protected against deep
discharging by the “Electronic Cell Protection
(ECP)”. When the battery is empty, the machine
is switched off by means of a protective circuit:
The inserted tool no longer rotates.
Do not continue to press the
On/Off switch after the ma-
chine has been automatically switched off. The
battery can be damaged.
Cordless Screwdriver GSR ProDrive
Professional
Article number 3 601 JA2 0..
Rated voltage V= 3.6
No-load speed rpm 0 – 250
Max. torque for
hard/soft screwdriving
application according
to ISO 5393 Nm 7/3
Max. screw dia. mm 5
Weight according to EP-
TA-Procedure 01/2003 kg 0.5
Please observe the article number on the type plate of
your power tool. The trade names of individual tools may
vary.
WARNING
OBJ_BUCH-771-002.book Page 8 Monday, May 26, 2008 11:35 AM
Page: 8
English | 9
Bosch Power Tools 1 609 929 R41 | (26.5.08)
To remove the battery 4, press the unlocking but-
tons 3 and pull out the battery downwards. Do
not exert any force.
The battery is equipped with an NTC tempera-
ture control which allows charging only within a
temperature range of between 0 °C and 45 °C. A
long battery service life is achieved in this man-
ner.
Observe the notes for disposal.
Changing the Tool (see figure B)
f Before any work on the power tool (e. g.,
maintenance, tool change, etc.) as well as
during transport and storage, set the rota-
tional direction switch to the center posi-
tion. Unintentional actuation of the On/Off
switch can lead to injuries.
f Do not use double-sided screwdriver blades
that are longer than 25 mm.
Insert the screwdriver bit 1 directly into the tool
holder 2.
Operation
Starting Operation
Inserting the Battery
f Use only original Bosch lithium ion batteries
with the voltage listed on the nameplate of
your power tool. Using other batteries can
lead to injuries and pose a fire hazard.
Note: Use of batteries not suitable for the ma-
chine can lead to malfunctions of or cause dam-
age to the power tool.
Set the rotational direction switch 6 to the center
position in order to avoid unintentional starting.
Insert the charged battery 4 into the handle so
that it can be felt to engage and faces flush
against the handle.
Reversing the Rotational Direction
(see figure C)
The rotational direction switch 6 is used to re-
verse the rotational direction of the machine.
However, this is not possible with the On/Off
switch 5 actuated.
Right rotation: For driving in screws push the ro-
tational direction switch 6 left to the stop.
Left Rotation: For loosening or unscrewing
screws, push the rotational direction switch 6
right to the stop.
Switching On and Off
To start the power tool, press the On/Off switch
5 and keep it pressed.
The light 7 is lit when the On/Off switch 5 is
slightly or completely pressed in, and allows for
illumination of the work area under unfavorable
lighting conditions.
To switch off the power tool, release the On/Off
switch 5.
Adjusting the Speed
The speed of the switched on power tool can be
variably adjusted, depending on how far the
On/Off switch 5 is pressed.
Light pressure on the On/Off switch 5 results in
a low rotational speed. Further pressure on the
switch results in an increase in speed.
Fully Automatic Spindle Locking (Auto-lock)
When the On/Off switch 5 is not pressed, the
drill spindle and thus the tool holder are locked.
This enables screws to be screwed in, even when
the battery is empty and allows for the tool to be
used as a screwdriver.
Temperature Dependent Overload Protection
When using as intended for, the power tool can-
not be subject to overload. When the load is too
high or the allowable battery temperature range
of 0–70 °C is exceeded, the speed is reduced.
The power tool will not run at full speed until
reaching the allowable battery temperature.
OBJ_BUCH-771-002.book Page 9 Monday, May 26, 2008 11:35 AM
Page: 9
1 609 929 R41 | (26.5.08) Bosch Power Tools
10 | English
Protection Against Deep Discharging
The lithium ion battery is protected against deep
discharging by the “Electronic Cell Protection
(ECP)”. When the battery is empty, the machine
is switched off by means of a protective circuit:
The inserted tool no longer rotates.
Working Instructions
f Apply the power tool to the screw only when
it is switched off. Rotating tool inserts can
slip off.
Tips
Before screwing larger, longer screws into hard
materials, it is advisable to predrill a pilot hole
with the core diameter of the thread to approx.
2
/3 of the screw length.
Maintenance and Service
Maintenance and Cleaning
f Before any work on the power tool (e. g.,
maintenance, tool change, etc.) as well as
during transport and storage, set the rota-
tional direction switch to the center posi-
tion. Unintentional actuation of the On/Off
switch can lead to injuries.
f For safe and proper working, always keep
the power tool and the ventilation slots
clean.
When the battery is no longer operative, please
refer to an authorized after-sales service agent
for Bosch power tools.
If the power tool should fail despite the care tak-
en in manufacturing and testing procedures, re-
pair should be carried out by an after-sales ser-
vice center for Bosch power tools.
In all correspondence and spare parts orders,
please always include the 10-digit article number
given on the type plate of the power tool.
After-sales Service and Customer Assis-
tance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be found
under:
www.bosch-pt.com
Our customer consultants answer your questions
concerning best buy, application and adjustment
of products and accessories.
In case of a claim, repair or purchase of replace-
ment parts or in case of queries or other prob-
lems, please contact your local dealer or Bosch
representative.
People’s Republic of China
Website: www.bosch-pt.com.cn
China Mainland
Bosch Power Tools (China) Co., Ltd.
567, Bin Kang Road
Bin Jiang District 310052
Hangzhou, P.R.China
Service Hotline: 800 8 20 84 84
Tel.: +86 (571) 87 77 43 38
Fax: +86 (571) 87 77 45 02
HK and Macau Special Administrative Regions
Robert Bosch Hong Kong Co. Ltd.
21st Floor, 625 King’s Road
North Point, Hong Kong
Customer Service Hotline: +852 (21) 02 02 35
Fax: +852 (25) 90 97 62
E-Mail: info@hk.bosch.com
www.bosch-pt.com.cn
Indonesia
PT. Multi Tehaka
Kawasan Industri Pulogadung
Jalan Rawa Gelam III No. 2
Jakarta 13930
Indonesia
Tel.: +62 (21) 4 60 12 28
Fax: +62 (21) 46 82 68 23
E-Mail: sales@multitehaka.co.id
www.multitehaka.co.id
OBJ_BUCH-771-002.book Page 10 Monday, May 26, 2008 11:35 AM
Page: 10
English | 11
Bosch Power Tools 1 609 929 R41 | (26.5.08)
Phillippines
Robert Bosch, Inc.
Zuellig Building
Sen. Gil Puyat Avenue
Makati City 1200, Metro Manila
Philippines
Tel.: +63 (2) 8 17 32 31
www.bosch.com.ph
Malaysia
Robert Bosch (SEA.) Pte. Ltd.
No. 8a, Jalan 13/6
46200 Petaling Jaya,
Selangor,
Malaysia
Tel.: +6 (03) 7966 3000
Fax: +6 (03) 7958 3838
E-Mail: hengsiang.yu@my.bosch.com
Toll Free Tel.: 1 800 880 188
Fax: +6 (03) 7958 3838
www.bosch.com.sg
Thailand
Robert Bosch Ltd.
Liberty Square Building
No. 287, 11 Floor
Silom Road, Bangrak
Bangkok 10500
Tel.: +66 (2) 6 31 18 79 – 18 88 (10 lines)
Fax: +66 (2) 2 38 47 83
Robert Bosch Ltd., P. O. Box 2054
Bangkok 10501, Thailand
Bosch Service – Training Centre
2869-2869/1 Soi Ban Kluay
Rama IV Road (near old Paknam Railway)
Prakanong District
10110 Bangkok
Thailand
Tel.: +66 (2) 6 71 78 00 – 4
Fax: +66 (2) 2 49 42 96
Fax: +66 (2) 2 49 52 99
Singapore
Robert Bosch (SEA.) Pte. Ltd.
38 C Jalan Pemimpin
Singapore 915701
Republic of Singapore
Tel.: +65 (3) 50 54 94
Fax: +65 (3) 50 53 27
www.bosch.com.sg
Vietnam
Robert Bosch (SEA) Pte. Ltd – Vietnam
Representative Office
Saigon Trade Center, Suite 1206
37 Ton Duc Thang Street,
Ben Nghe Ward, District 1
HCMC
Vietnam
Tel.: +84 (8) 9111 374 – 9111 375
Fax: +84 (8) 9111376
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: +61 (01300) 307 044
Fax: + 61 (01300) 307 045
Inside New Zealand:
Phone: +64 (0800) 543 353
Fax: +64 (0800) 428 570
Outside AU and NZ:
Phone: +61 (03) 9541 5555
www.bosch.com.au
OBJ_BUCH-771-002.book Page 11 Monday, May 26, 2008 11:35 AM
Page: 11
1 609 929 R41 | (26.5.08) Bosch Power Tools
12 | English
Transport
The battery is tested according to UN document
ST/SG/AC.10/11/Rev.3 Part III, subsection 38.3.
It has effective protection against internal over-
pressure and short circuiting as well as devices
for the prevention of violent rupture and danger-
ous reverse current flow.
The lithium-equivalent content in the battery is
below applicable limit values. Therefore, the bat-
tery is not subject to national or international
regulations pertaining to dangerous mediums,
neither as an individual component nor when in-
serted into a machine. However, the regulations
governing dangerous goods may be relevant
when transporting several batteries. In this case,
it can be necessary to comply with special condi-
tions (e.g., concerning the packaging). For more
information, please refer to the instruction sheet
(in English) under the following Internet address:
http://purchasing.bosch.com/en/start/
Allgemeines/Download/index.htm.
Disposal
Power tools, accessories and packaging should
be sorted for environmental-friendly recycling.
Battery packs/batteries:
Lithium ion:
Please observe the information
under “Transport”, page 12.
Do not dispose of battery packs/batteries into
household waste, fire or water. Battery
packs/batteries should be collected, recycled or
disposed of in an environmental-friendly manner.
Subject to change without notice.
OBJ_BUCH-771-002.book Page 12 Monday, May 26, 2008 11:35 AM

Question & answers

There are no questions about the Bosch GSR ProDrive yet.

Ask a question about the Bosch GSR ProDrive

Have a question about the Bosch GSR ProDrive but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Bosch GSR ProDrive. Please make sure that you describe your difficulty with the Bosch GSR ProDrive as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.