Bosch GSR Mx2Drive manual

View a manual of the Bosch GSR Mx2Drive below. All manuals on can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Bosch
  • Product: Screw Machine
  • Model/name: GSR Mx2Drive
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian, Swedish, Portuguese, Danish, Polish, Russian, Finnish, Czech, Romanian, Turkish, Slovak, Hungarian, Slovene, Croatian, Ukrainian

Table of Contents

Page: 11
1 609 92A 0CA | (24.6.13) Bosch Power Tools
12 | English
Nur für EU-Länder:
Gemäß der europäischen Richtlinie 2012/19/EU müssen nicht mehr ge-
brauchsfähige Elektrowerkzeuge und gemäß der europäischen Richtlinie
2006/66/EG müssen defekte oder verbrauchte Akkus/Batterien getrennt
gesammeltundeinerumweltgerechten Wiederverwendungzugeführtwer-
Änderungen vorbehalten.
General Power Tool Safety Warnings
Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work area safety
 Keep work area clean and well lit. Cluttered or dark areas invite accidents.
 Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust
or fumes.
 Keep children and bystanders away while operating a power tool. Distractions can
cause you to lose control.
Electrical safety
 Power tool plugs must match the outlet. Never modify the plug in any way. Do not
use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
 Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
 Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
 Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges and moving parts. Damaged
or entangled cords increase the risk of electric shock.
 When operating a power tool outdoors, use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
WARNING Page 12 Monday, June 24, 2013 3:19 PM
Page: 12
English | 13
Bosch Power Tools 1 609 92A 0CA | (24.6.13)
English | 13
 Ifoperatingapowertoolinadamplocationisunavoidable,usearesidualcurrentde-
vice (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
Personal safety
 Stayalert,watchwhatyouaredoingandusecommonsensewhenoperatingapower
tool. Do not use a power tool while you are tired or under the influence of drugs, al-
cohol or medication. A moment of inattention while operating power tools may result in
serious personal injury.
 Use personal protective equipment. Always wear eye protection. Protective equip-
ment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
 Prevent unintentional starting. Ensure the switch is in the off-position before con-
necting to power source and/or battery pack, picking up or carrying the tool. Carry-
ing power tools with your finger on the switch or energising power tools that have the
switch on invites accidents.
 Remove any adjusting key or wrench before turning the power tool on.A wrenchor a
key left attached to a rotating part of the power tool may result in personal injury.
 Do not overreach. Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.
 Dressproperly.Donotwearlooseclothingorjewellery.Keepyourhair,clothingand
gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in
moving parts.
 If devices are provided for the connection of dust extraction and collection facili-
ties, ensure these are connectedand properly used. Use of dust collection can reduce
dust-related hazards.
Power tool use and care
 Do not force the powertool.Use the correct power tool for your application.The cor-
rect power tool will do the job better and safer at the rate for which it was designed.
 Donotuse thepowertool if theswitch doesnot turniton andoff. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
 Disconnect the plug from the power source and/or the battery pack from the power
tool before making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
 Store idle power tools out of the reach of children and do not allow persons unfamil-
iar with the power tool or these instructions to operate the power tool. Power tools
are dangerous in the hands of untrained users.
 Maintainpowertools.Checkformisalignmentorbindingofmovingparts,breakage
of parts and any other condition that may affect the power tool’s operation. If dam-
aged, have the power tool repaired before use. Many accidents are caused by poorly
maintained power tools.
 Keepcuttingtoolssharpandclean.Properlymaintainedcuttingtoolswithsharpcutting
edges are less likely to bind and are easier to control.
 Use the power tool, accessories and tool bits etc. in accordance with these instruc-
tions,takingintoaccounttheworkingconditionsandtheworktobeperformed.Use Page 13 Monday, June 24, 2013 3:19 PM
Page: 13
1 609 92A 0CA | (24.6.13) Bosch Power Tools
14 | English
ofthepowertoolfor operationsdifferentfrom those intendedcouldresult ina hazardous
Battery tool use and care
 Recharge only with the charger specified by the manufacturer. A charger that is suit-
able for one type of battery pack may create a risk of fire when used with another battery
 Usepowertoolsonlywithspecificallydesignatedbattery packs.Useofany otherbat-
tery packs may create a risk of injury and fire.
 When battery pack is not in use, keep it away from other metal objects, like paper
clips, coins, keys, nails, screws or other small metal objects, that can make a con-
nection from one terminal to another. Shorting the battery terminals together may
cause burns or a fire.
 Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the battery may cause irritation or burns.
 Have your power tool serviced by a qualified repair person using only identical re-
placement parts. This will ensure that the safety of the power tool is maintained.
Safety Warnings for Drills and Screwdriver
 Hold power tool by insulated gripping surfaces, when performing an operation
where the cutting accessory or fastener may contact hidden wiring. Cutting accesso-
ry and fasteners contacting a “live” wire may make exposed metal parts of the power tool
“live” and could give the operator an electric shock.
 Useauxiliary handle(s), ifsuppliedwiththetool.Lossofcontrolcancausepersonalin-
 Useappropriatedetectorstodetermineif utility lines arehiddeninthework areaor
call the local utility company for assistance. Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can lead to explosion. Penetrating a water line
causes property damage.
 Switch off the power tool immediately when the tool insert jams. Be prepared for
high reaction torque that can cause kickback. The tool insert jams when:
— the power tool is subject to overload or
— it becomes wedged in the workpiece.
 Hold the machine with a firm grip. High reaction torque can briefly occur while driving
in and loosening screws.
 Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held
more secure than by hand.
 Always wait until the machine has come to a complete stop before placing it down.
The tool insert can jam and lead to loss of control over the power tool.
 Do not open the battery. Danger of short-circuiting. Page 14 Monday, June 24, 2013 3:19 PM
Page: 14
English | 15
Bosch Power Tools 1 609 92A 0CA | (24.6.13)
English | 15
Protect the battery against heat, e. g., against continuous intense sunlight,
fire, water, and moisture. Danger of explosion.
 In case of damage and improper use of the battery, vapours may be emitted. Venti-
late the area and seek medical help in case of complaints. The vapourscan irritate the
respiratory system.
 Use the battery only in conjunction with your Bosch power tool. This measure alone
protects the battery against dangerous overload.
 Use only original Bosch batteries with the voltage listed on the nameplate of your
power tool.Whenusingotherbatteries,e.g.imitations,reconditionedbatteriesor other
brands, there is danger of injury as well as property damage through exploding batteries.
Additional Safety and Working Instructions
 Dusts from materials such as lead-containing coatings, some wood types, minerals
and metal can be harmful to one’shealth andcause allergic reactions, leadto respir-
atory infections and/or cancer. Materials containing asbestos may only be worked by
– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the materials to be worked.
 Before any work on the machine (e. g., maintenance, tool change, etc.) as well as
during transport and storage, set the rotational direction switch to the centre posi-
tion. Unintentional actuation of the On/Off switch can lead to injuries.
 The battery is supplied partially charged. To ensure full battery capacity, complete-
ly charge the battery in the battery charger before using for the first time.
 Read the operating instructions of the battery charger.
 Apply the power tool to the screw only when it is switched off. Rotating tool inserts
can slip off.
 Hold the machine with a firm grip. High reaction torque can briefly occur when switch-
ing gears. A noise can appear when switching gears.
 To save energy, only switch the power tool on when using it.
The following symbols are important for reading and understanding the operating instruc-
tions. Please take note of the symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer manner. Page 15 Monday, June 24, 2013 3:19 PM
Page: 15
1 609 92A 0CA | (24.6.13) Bosch Power Tools
16 | English
Symbol Meaning
GSR Mx2Drive: Cordless Drill/Driver
Grey-marked area: Handle (insulated gripping surface)
Article number
Read all safety warnings and all instructions.
Before any work on the machine itself, remove the battery.
Always wear ear protection.
Movement direction
Reaction direction
Right/left rotation
Drilling and screwdriving
Low speed
High speed
Switching On Page 16 Monday, June 24, 2013 3:19 PM
Page: 16
English | 17
Bosch Power Tools 1 609 92A 0CA | (24.6.13)
English | 17
Delivery Scope
Cordless Drill/Driver.
Battery, application tools and other accessories shown or described are not part of the
standard delivery scope.
A complete overview of accessories can be found in our accessories program.
Intended Use
The light of this power tool is intended to illuminate the power tool’s direct area of working
operation and is not suitable for household room illumination.
Technical Data
The technical data of the machine are listed in the table on page 276.
Switching Off
U Rated voltage
n0 1 No-load speed (1st gear)
n0 2 No-load speed (2nd gear)
M Maximum torque according to ISO 5393
Ø Drilling diameter, max.
Ø Max. screw dia.
Tool holder
Weight according to EPTA-Procedure 01/2003
LwA Sound power level
LpA Sound pressure level
K Uncertainty
ah Vibration total value
Symbol Meaning Page 17 Monday, June 24, 2013 3:19 PM
Page: 17
1 609 92A 0CA | (24.6.13) Bosch Power Tools
18 | English
Declaration of Conformity
We declare under our sole responsibility that the product described under “Technical Data”
is in conformity with the following standards or standardisation documents: EN 60745 ac-
cording to the provisions of the directives 2009/125/EC (Regulation 1194/2012),
2011/65/EU, 2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Noise/Vibration Information
The measured values of the machine are listed in the table on page 276.
Noise and vibrational values (vector sum of three directions) determined according to
EN 60745.
The vibration emission level given in this information sheet has been measured in accord-
ance with a standardised test given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However
if the tool is used for different applications, with different accessories or poorly maintained,
thevibrationemissionmaydiffer.Thismaysignificantly increasetheexposureleveloverthe
total working period.
An estimation of the level of exposure to vibration should also take into account the times
whenthetoolisswitchedofforwhenitisrunning butnotactuallydoing thejob. This may sig-
nificantly reduce the exposure level over the total working period.
Identifyadditionalsafetymeasurestoprotecttheoperatorfromtheeffectsofvibration such
as: maintain the tool and the accessories, keep hands warm, organise work patterns.
Mounting and Operation
Henk Becker
Executive Vice President
Helmut Heinzelmann
Head of Product Certification
Action Figure Page
Removing the battery 1 277
Inserting the battery 2 277
Mounting application tools 3 277
Reversing the rotational direction 4 278 Page 18 Monday, June 24, 2013 3:19 PM
Page: 18
English | 19
Bosch Power Tools 1 609 92A 0CA | (24.6.13)
English | 19
Maintenance and Cleaning
 For safe and proper working, always keep the machine and ventilation slots clean.
After-sales Service and Application Service
Our after-sales service responds to your questions concerning maintenance and repair of
your product as well as spare parts. Exploded views and information on spare parts can also
be found under:
Bosch’s application service team will gladly answer questions concerning our products and
their accessories.
In all correspondence and spare parts order, please always include the 10-digit article num-
ber given on the type plate of the machine.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
UB 9 5HJ
Tel. Service: (0844) 7360109
Fax: (0844) 7360146
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Adjusting the Speed 5 279
Switching On and Off 6 279
Selecting Accessories – 280
Action Figure Page Page 19 Monday, June 24, 2013 3:19 PM
Page: 19
1 609 92A 0CA | (24.6.13) Bosch Power Tools
20 | English
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Tel.: (011) 4939375
Fax: (011) 4930126
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Tel.: (031) 7012120
Fax: (031) 7012446
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Tel.: (021) 5512577
Fax: (021) 5513223
Bosch Headquarters
Midrand, Gauteng
Tel.: (011) 6519600
Fax: (011) 6519880
E-Mail: Page 20 Monday, June 24, 2013 3:19 PM
Page: 20
Français | 21
Bosch Power Tools 1 609 92A 0CA | (24.6.13)
Français | 21
The contained lithium ion batteries are subject to the Dangerous Goods Legislation require-
ments. The user can transport the batteries by road without further requirements.
When being transported by third parties (e.g.: air transport or forwarding agency), special
requirements on packaging and labelling must be observed. For preparation of the item be-
ing shipped, consulting an expert for hazardous material is required.
pack up the battery in such a manner that it cannot move around in the packaging.
Please also observe possibly more detailed national regulations.
The machine, rechargeable batteries, accessories and packaging should be sorted
for environmental-friendly recycling.
Do not dispose of power tools and batteries/rechargeable batteries into household waste!
Only for EC countries:
According to the European Guideline 2012/19/EU, power tools that are
no longer usable, and according to the European Guideline 2006/66/EC,
defective or used battery packs/batteries, must be collected separately
and disposed of in an environmentally correct manner.
Subject to change without notice.
Avertissements de sécurité généraux pour l’outil
Lire tous les avertissements de sécurité et toutes les ins-
tructions. Ne pas suivre les avertissements et instructions
peut donner lieu à un choc électrique, un incendie et/ou une blessure sérieuse.
Conserver tous les avertissements et toutes les instructions pour pouvoir s’y reporter
Le terme « outil » dans les avertissements fait référence à votre outil électrique alimenté par
lesecteur(aveccordond’alimentation) ouvotre outil fonctionnantsurbatterie (sanscordon
Sécurité de la zone de travail
 Conserver la zone de travail propre et bien éclairée. Les zones en désordre ou
sombres sont propices aux accidents.
 Ne pas faire fonctionner les outils électriques en atmosphère explosive, par
exemple en présence de liquides inflammables, de gaz ou de poussières. Les outils
AVERTISSEMENT Page 21 Monday, June 24, 2013 3:19 PM
Page: 275
1 609 92A 0CA | (24.6.13) Bosch Power Tools
276 |
GSR Mx2Drive
3 601 JA2 1..
U V= 3,6
n0 1 min-1
n0 2 min-1
0 – 580
M Nm 10
M Nm 5
Ø mm 5
Ø mm 5
mm 6,35 (¼")
kg 0,5
LwA dB(A) 81
LpA dB(A) 70
K dB 3
ah m/s2
ah m/s2
K m/s2
1,5 Page 276 Monday, June 24, 2013 3:19 PM
Page: 276
| 277
Bosch Power Tools 1 609 92A 0CA | (24.6.13)
| 277
2 Page 277 Monday, June 24, 2013 3:19 PM
Page: 277
1 609 92A 0CA | (24.6.13) Bosch Power Tools
278 |
4 Page 278 Monday, June 24, 2013 3:19 PM
Page: 278
| 279
Bosch Power Tools 1 609 92A 0CA | (24.6.13)
| 279
5 Page 279 Monday, June 24, 2013 3:19 PM
Page: 279
1 609 92A 0CA | (24.6.13) Bosch Power Tools
280 |
3,6 V (Li-Ion)
2 607 336 242
AL 1115 CV
(3,6 – 10,8 V)
2 607 225 514 (EU)
2 607 225 516 (UK) Page 280 Monday, June 24, 2013 3:19 PM

Question & answers

There are no questions about the Bosch GSR Mx2Drive yet.

Ask a question about the Bosch GSR Mx2Drive

Have a question about the Bosch GSR Mx2Drive but cannot find the answer in the user manual? Perhaps the users of can help you answer your question. By filling in the form below, your question will appear below the manual of the Bosch GSR Mx2Drive. Please make sure that you describe your difficulty with the Bosch GSR Mx2Drive as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.