Bosch GSR 14,4-2-LI inkl. 2 x 1,5 Ah + L-Boxx (06019B7400) manual

View a manual of the Bosch GSR 14,4-2-LI inkl. 2 x 1,5 Ah + L-Boxx (06019B7400) below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Bosch
  • Product: Screw Machine
  • Model/name: GSR 14,4-2-LI inkl. 2 x 1,5 Ah + L-Boxx (06019B7400)
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian, Swedish, Portuguese, Danish, Polish, Russian, Finnish, Romanian, Turkish, Slovak, Hungarian, Slovene, Croatian, Ukrainian

Table of Contents

Page: 7
8 | English
1 609 92A 00K | (19.12.12) Bosch Power Tools
Work area safety
 Keepworkareacleanandwelllit.Clutteredordarkareas
invite accidents.
 Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
 Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical safety
 Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
 Avoidbodycontactwithearthedorgroundedsurfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
 Do not expose power tools to rain or wet conditions.
Waterenteringapowertoolwillincreasetheriskofelectric
shock.
 Do not abuse the cord. Neveruse the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges and moving parts.Damaged
or entangled cords increase the risk of electric shock.
 When operating a power tool outdoors, use an exten-
sioncord suitablefor outdooruse.Use ofa cord suitable
for outdoor use reduces the risk of electric shock.
 If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
Personal safety
 Stay alert, watch what you are doing and use common
sensewhenoperatinga power tool.Do notuse apower
toolwhileyouaretiredorundertheinfluenceofdrugs,
alcohol or medication. A moment of inattention while op-
erating power tools may result in serious personal injury.
 Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal inju-
ries.
 Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or en-
ergising power tools that have the switch on invites acci-
dents.
 Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a ro-
tating part of the power tool may result in personal injury.
 Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
 Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from
movingparts. Loose clothes, jewellery or long hair can be
caught in moving parts.
 If devices are provided for the connection of dust ex-
traction and collection facilities, ensure these are con-
nected and properly used. Use of dust collection can re-
duce dust-related hazards.
Power tool use and care
 Donotforcethepowertool.Usethecorrectpowertool
for your application. The correct power tool will do the
job better and safer at the rate for which it was designed.
 Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
 Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
 Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
 Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other
conditionthat may affectthe power tool’s operation. If
damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power
tools.
 Keepcuttingtoolssharpandclean.Properly maintained
cuttingtoolswithsharpcuttingedgesarelesslikelytobind
and are easier to control.
 Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
Battery tool use and care
 Recharge only with the charger specified by the manu-
facturer. A charger that is suitable for one type of battery
pack may create a risk of fire when used with another bat-
tery pack.
 Use power tools only with specifically designated bat-
tery packs. Use of any other battery packs may create a
risk of injury and fire.
 When battery pack is not in use, keep it away from oth-
er metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
 Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addition-
ally seek medical help. Liquid ejected from the battery
may cause irritation or burns.
OBJ_BUCH-1116-004.book Page 8 Wednesday, December 19, 2012 12:00 PM
Page: 8
English | 9
Bosch Power Tools 1 609 92A 00K | (19.12.12)
Service
 Haveyourpowertoolservicedbyaqualifiedrepairper-
son using only identical replacement parts. This will en-
sure that the safety of the power tool is maintained.
Safety Warnings for Drills and
Screwdriver
GSB 14,4-2-LI/GSB 18-2-LI
 Wear ear protectors when impact drilling. Exposure to
noise can cause hearing loss.
GSR 14,4-2-LI/GSR 18-2-LI/GSB 14,4-2-LI/
GSB 18-2-LI
 Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
or fastener may contact hidden wiring.Cutting accesso-
ry and fasteners contacting a “live” wire may make ex-
posed metal parts of the power tool “live” and could give
the operator an electric shock.
 Use appropriate detectors to determine if utility lines
are hidden in the work area or call the local utility com-
pany for assistance. Contact with electric lines can lead
to fire and electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes property dam-
age.
 Switchoffthepowertoolimmediatelywhenthetoolin-
sert jams. Be prepared for high reaction torque that
can cause kickback. The tool insert jams when:
— the power tool is subject to overload or
— it becomes wedged in the workpiece.
 Hold the machine with a firm grip. High reaction torque
can briefly occur while driving in and loosening screws.
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
 Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and
moisture. Danger of explosion.
 In case of damage and improper use of the battery,
vapours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can
irritate the respiratory system.
 Use the battery only in conjunction with your Bosch
power tool. This measure alone protects the battery
against dangerous overload.
 Use only original Bosch batteries with the voltage list-
edonthenameplateofyourpowertool.Whenusingoth-
er batteries, e.g. imitations, reconditioned batteries or
other brands, there is danger of injury as well as property
damage through exploding batteries.
Additional Safety and Working
Instructions
 Dustsfrommaterialssuchaslead-containingcoatings,
somewoodtypes,mineralsandmetalcanbeharmfulto
one’s health and cause allergic reactions, lead to res-
piratory infections and/or cancer. Materials containing
asbestos may only be worked by specialists.
– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the
materials to be worked.
 Prevent dust accumulation at the workplace.Dusts can
easily ignite.
 Before any work on the machine (e. g., maintenance,
tool change, etc.) as well as during transport and stor-
age, set the rotational direction switch to the centre
position.UnintentionalactuationoftheOn/Offswitchcan
lead to injuries.
 Thebatteryissuppliedpartiallycharged.Toensurefull
battery capacity, completely charge the battery in the
battery charger before using for the first time.
 Read the operating instructions of the battery charger.
 Apply the power tool to the screw only when it is
switched off. Rotating tool inserts can slip off.
 Adjust the gear switch only when the machine is at a
complete stop.
 If the gear switch cannot be pushed to the stop, turn
the drill chuck a little.
 To save energy, only switch the power tool on when using
it.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer
manner.
Symbol Meaning
GSR 14,4-2-LI/GSR 18-2-LI/
GSB 14,4-2-LI/GSB 18-2-LI: Cordless
screwdriver/Combination cordless drill
Grey-marked area: Handle
(insulated gripping surface)
Article number
Read all safety warnings and all instruc-
tions
OBJ_BUCH-1116-004.book Page 9 Wednesday, December 19, 2012 12:00 PM
Page: 9
10 | English
1 609 92A 00K | (19.12.12) Bosch Power Tools
Delivery Scope
Cordless screwdriver/Combination cordless drill.
Battery, application tools and other accessories shown or de-
scribed are not part of the standard delivery scope.
A complete overview of accessories can be found in our ac-
cessories program.
Intended Use
The machine is intended for driving in and loosening screws
as well as for drilling in wood, metal, ceramics and plastic.
GSB machines are additionally intended for impact drilling in
bricks, brickwork and masonry.
Technical Data
The technical data of the machine are listed in the table on
page 138.
Please observe the article number on the type plate of your
machine. The trade names of the individual machines may
vary.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
16.11.2012
Noise/Vibration Information
The measured values of the machine are listed in the table on
page 138.
Noise and vibrational values (vector sum of three directions)
determined according to EN 60745.
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN60745 and maybeused tocompare one toolwith
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications,withdifferentaccessoriesorpoorlymaintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
Before any work on the machine itself,
remove the battery
Always wear ear protection.
Movement direction
Reaction direction
Right/left rotation
Drilling and screwdriving
Impact drilling
Low speed
High speed
Switching On
Switching Off
U Rated voltage
nS Impact rate
n0 1 No-load speed (1. gear)
n0 2 No-load speed (2. gear)
M Maximum torque according to ISO 5393
Brickwork
Metal
Wood
Ø Drilling diameter, max.
Ø Max. screw dia.
Chuck clamping range
Weight according to EPTA-Procedure
01/2003
* Value dependent of the battery pack
being used
LwA Sound power level
LpA Sound pressure level
K Uncertainty
ah Vibration total value
Symbol Meaning
Dr. Egbert Schneider
Senior Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
OBJ_BUCH-1116-004.book Page 10 Wednesday, December 19, 2012 12:00 PM
Page: 10
English | 11
Bosch Power Tools 1 609 92A 00K | (19.12.12)
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
whenitisrunningbutnotactuallydoingthejob.Thismaysignif-
icantlyreducetheexposure level overthetotalworkingperiod.
Identify additional safety measures to protect the operator
fromtheeffectsofvibrationsuchas:maintainthetoolandthe
accessories, keep hands warm, organise work patterns.
Mounting and Operation
Maintenance and Cleaning
 For safe and proper working, always keep the machine
and ventilation slots clean.
After-sales Service and Application
Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch’sapplicationserviceteam willgladlyanswerquestions
concerning our products and their accessories.
Inallcorrespondenceandsparepartsorder,pleasealwaysin-
clude the 10-digit article number given on the type plate of
the machine.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: (0844) 7360109
Fax: (0844) 7360146
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: bsc.dur@za.bosch.com
Action Figure Page
Removing the battery 1 139
Inserting the battery 2 139
Mounting application tools 3 139
Reversing the rotational direction 4 140
Setting the torque 5 140
Selecting the drilling position 6 141
Setting the operating mode 7 141
Gear selection, mechanical 8 141
Switching On and Off 9 142
Selecting Accessories – 143
OBJ_BUCH-1116-004.book Page 11 Wednesday, December 19, 2012 12:00 PM
Page: 137
138 |
1 609 92A 00K | (19.12.12) Bosch Power Tools
GSR 14,4-2-LI GSR 18-2-LI GSB 14,4-2-LI GSB 18-2-LI
3 601 JA4 4.. 3 601 JA4 3.. 3 601 JA5 4.. 3 601 JA5 3..
U V= 14,4 18 14,4 18
n0 1 min-1
0 – 400 0 –400 0 – 500 0 –500
n0 2 min-1
0 – 1250 0 –1300 0 – 1400 0 –1450
nS min-1
– – 0 – 21000 0 – 21000
M Nm 38 45 38 45
M Nm 16* 19* 16* 19*
Ø mm – – 10 10
Ø mm 10 10 10 10
Ø mm 25 29 25 29
Ø mm 7 8 7 8
mm 1,5 – 10 1,5 – 10 1,5 – 10 1,5 – 10
kg 1,3/1,5* 1,4/1,6* 1,4/1,6* 1,5/1,7*
LwA dB(A) <70 <70 95 95
LpA dB(A) – – 84 84
K dB 3 3 3 3
ah m/s2
– – 13 13
ah m/s2
<2,5 <2,5 3 3
ah m/s2
<2,5 <2,5 <2,5 <2,5
K m/s2
1,5 1,5 1,5 1,5
OBJ_BUCH-1116-004.book Page 138 Wednesday, December 19, 2012 12:00 PM
Page: 138
| 139
Bosch Power Tools 1 609 92A 00K | (19.12.12)
2
3
1
1
2
1
2
3
OBJ_BUCH-1116-004.book Page 139 Wednesday, December 19, 2012 12:00 PM
Page: 139
1 609 92A 00K | (19.12.12) Bosch Power Tools
140 |
5
4
Min.
Max.
OBJ_BUCH-1116-004.book Page 140 Wednesday, December 19, 2012 12:00 PM
Page: 140
| 141
Bosch Power Tools 1 609 92A 00K | (19.12.12)
7
8
6
OBJ_BUCH-1116-004.book Page 141 Wednesday, December 19, 2012 12:00 PM
Page: 141
1 609 92A 00K | (19.12.12) Bosch Power Tools
142 |
9
OBJ_BUCH-1116-004.book Page 142 Wednesday, December 19, 2012 12:00 PM
Page: 142
| 143
Bosch Power Tools 1 609 92A 00K | (19.12.12)
AL 1820 CV
(14,4 / 18 V)
2 607 225 424 (EU)
2 607 225 426 (UK)
AL 1860 CV
(14,4 / 18 V)
2 607 225 322 (EU)
2 607 225 324 (UK)
L-BOXX 136
2 608 438 692
2 608 438 019
14,4 V (Li-Ion)
18 V (Li-Ion)
OBJ_BUCH-1116-004.book Page 143 Wednesday, December 19, 2012 12:00 PM

Question & answers

There are no questions about the Bosch GSR 14,4-2-LI inkl. 2 x 1,5 Ah + L-Boxx (06019B7400) yet.

Ask a question about the Bosch GSR 14,4-2-LI inkl. 2 x 1,5 Ah + L-Boxx (06019B7400)

Have a question about the Bosch GSR 14,4-2-LI inkl. 2 x 1,5 Ah + L-Boxx (06019B7400) but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Bosch GSR 14,4-2-LI inkl. 2 x 1,5 Ah + L-Boxx (06019B7400). Please make sure that you describe your difficulty with the Bosch GSR 14,4-2-LI inkl. 2 x 1,5 Ah + L-Boxx (06019B7400) as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.