Bosch GSR 10,8 V-EC Professional manual

View a manual of the Bosch GSR 10,8 V-EC Professional below. All manuals on can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Bosch
  • Product: Screw Machine
  • Model/name: GSR 10,8 V-EC Professional
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian, Swedish, Portuguese, Danish, Polish, Russian, Finnish, Romanian, Turkish, Slovak, Hungarian, Slovene, Croatian, Ukrainian

Table of Contents

Page: 7
8 | English
2 609 141 137 | (4.12.13) Bosch Power Tools
Elektrowerkzeuge, Akkus, Zubehör und Verpackun-
gen sollen einer umweltgerechten Wiederverwertung
zugeführt werden.
Werfen Sie Elektrowerkzeuge und Akkus/Batterien nicht in
den Hausmüll!
Nur für EU-Länder:
Gemäß der europäischen Richtlinie
2012/19/EU müssen nicht mehr ge-
brauchsfähige Elektrowerkzeuge und ge-
mäß der europäischen Richtlinie
2006/66/EG müssen defekte oder ver-
brauchte Akkus/Batterien getrennt gesam-
melt und einer umweltgerechten Wiederverwendung zuge-
führt werden.
Nicht mehr gebrauchsfähige Akkus/Batterien können direkt
abgegeben werden bei:
Recyclingzentrum Elektrowerkzeuge
Osteroder Landstraße 3
37589 Kalefeld
Batrec AG
3752 Wimmis BE
Änderungen vorbehalten.
General Power Tool Safety Warnings
Read all safety warnings and all in-
and instructions may result in electric shock, fire and/or seri-
ous injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated(corded) power toolorbattery-operated(cordless)
power tool.
Work area safety
 Keepworkareacleanandwelllit.Clutteredordarkareas
invite accidents.
 Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
 Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical safety
 Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
 Avoidbodycontactwithearthedorgroundedsurfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
 Do not expose power tools to rain or wet conditions.
 Do not abuse the cord. Neveruse the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges and moving parts.Damaged
or entangled cords increase the risk of electric shock.
 When operating a power tool outdoors, use an exten-
sioncord suitablefor outdooruse. Use ofa cord suitable
for outdoor use reduces the risk of electric shock.
 If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
Personal safety
 Stay alert, watch what you are doing and use common
sensewhenoperatinga power tool.Do notuse apower
alcohol or medication. A moment of inattention while op-
erating power tools may result in serious personal injury.
 Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal inju-
 Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or en-
ergising power tools that have the switch on invites acci-
 Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a ro-
tating part of the power tool may result in personal injury.
 Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
 Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from
movingparts. Loose clothes, jewellery or long hair can be
caught in moving parts.
 If devices are provided for the connection of dust ex-
traction and collection facilities, ensure these are con-
nected and properly used. Use of dust collection can re-
duce dust-related hazards.
Power tool use and care
 Donotforcethepowertool.Usethecorrectpowertool
for your application. The correct power tool will do the
job better and safer at the rate for which it was designed.
WARNING Page 8 Wednesday, December 4, 2013 9:28 AM
Page: 8
English | 9
Bosch Power Tools 2 609 141 137 | (4.12.13)
 Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
 Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
 Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
 Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other
conditionthat may affectthe power tool’s operation. If
damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power
 Keepcuttingtoolssharpandclean.Properly maintained
and are easier to control.
 Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
Battery tool use and care
 Recharge only with the charger specified by the manu-
facturer. A charger that is suitable for one type of battery
pack may create a risk of fire when used with another bat-
tery pack.
 Use power tools only with specifically designated bat-
tery packs. Use of any other battery packs may create a
risk of injury and fire.
 When battery pack is not in use, keep it away from oth-
er metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
 Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addition-
ally seek medical help. Liquid ejected from the battery
may cause irritation or burns.
 Haveyourpowertoolservicedbyaqualifiedrepairper-
son using only identical replacement parts. This will en-
sure that the safety of the power tool is maintained.
Safety Warnings for Drills and
 Use auxiliary handle(s), if supplied with the tool. Loss
of control can cause personal injury.
 Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
or fastener may contact hidden wiring.Cutting accesso-
ry and fasteners contacting a “live” wire may make ex-
posed metal parts of the power tool “live” and could give
the operator an electric shock.
 Use appropriate detectors to determine if utility lines
are hidden in the work area or call the local utility com-
pany for assistance. Contact with electric lines can lead
to fire and electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes property dam-
 Switchoffthepowertoolimmediatelywhenthetoolin-
sert jams. Be prepared for high reaction torque that
can cause kickback. The tool insert jams when:
— the power tool is subject to overload or
— it becomes wedged in the workpiece.
 Hold the machine with a firm grip. High reaction torque
can briefly occur while driving in and loosening screws.
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
 Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and
moisture. Danger of explosion.
 In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
 Use the battery only in conjunction with your Bosch
power tool. This measure alone protects the battery
against dangerous overload.
 Thebatterycanbedamagedbypointedobjectssuchas
nails or screwdrivers or by force applied externally. An
internal short circuit can occur and the battery can burn,
smoke, explode or overheat.
Additional Safety and Working
 Dustsfrommaterialssuchaslead-containingcoatings,
one’s health and cause allergic reactions, lead to res-
piratory infections and/or cancer. Materials containing
asbestos may only be worked by specialists.
– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the
materials to be worked.
 Prevent dust accumulation at the workplace.Dusts can
easily ignite. Page 9 Wednesday, December 4, 2013 9:28 AM
Page: 9
10 | English
2 609 141 137 | (4.12.13) Bosch Power Tools
 Thebatteryissuppliedpartiallycharged.Toensurefull
battery capacity, completely charge the battery in the
battery charger before using for the first time.
 Before any work on the machine (e. g., maintenance,
tool change, etc.) as well as during transport and stor-
age, set the rotational direction switch to the centre
lead to injuries.
 Read the operating instructions of the battery charger.
 Apply the power tool to the screw only when it is
switched off. Rotating tool inserts can slip off.
 Adjust the gear switch only when the machine is at a
complete stop.
 Always push the gear selector through to the stop. Oth-
erwise, the machine can become damaged.
 If the gear switch cannot be pushed through to the
stop, turn the chuck slightly (GSR 10.8 V-EC).
 The battery charge-control indicator consists of three
green LEDs, and indicates the charge condition of the bat-
tery for a few seconds when the On/Off switch is pressed
halfway or fully.
 To save energy, only switch the power tool on when using
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer
LED Capacity
Continuous lighting 3 x green ≥ 2/3
Continuous lighting 2 x green ≥1/3
Continuous lighting 1 x green < 1/3
Flashing light 1 x green Reserve
Symbol Meaning
GSR 10,8 V-EC/GSR 10,8 V-EC HX:
Cordless Screwdriver
Grey-marked area: Handle
(insulated gripping surface)
Article number
Read all safety warnings and all instruc-
Before any work on the machine itself,
remove the battery
Always wear ear protection.
Movement direction
Reaction direction
Right/left rotation
Low speed
High speed
Switching On
Switching Off
Battery Charge Indicator
U Rated voltage
n0 1 No-load speed (1. gear)
n0 2 No-load speed (2. gear)
M Maximum torque according to ISO 5393
Ø Drilling diameter, max.
Ø Max. screw dia.
Tool holder
Chuck clamping range
Weight according to EPTA-Procedure
* Value dependent of the battery pack
being used
LwA Sound power level
LpA Sound pressure level
K Uncertainty
ah Vibration total value
Symbol Meaning Page 10 Wednesday, December 4, 2013 9:28 AM
Page: 10
English | 11
Bosch Power Tools 2 609 141 137 | (4.12.13)
Delivery Scope
Cordless Screwdriver.
Battery, application tools and other accessories shown or de-
scribed are not part of the standard delivery scope.
A complete overview of accessories can be found in our ac-
cessories program.
Intended Use
The machine is intended for driving in and loosening screws
as well as for drilling in wood, metal, ceramics and plastic.
tool’s direct area of working operation and is not suitable for
household room illumination.
Technical Data
The technical data of the machine are listed in the table on
page 157.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with the fol-
lowing standards or standardisation documents: EN 60745
according to the provisions of the directives 2009/125/EC
(Regulation 1194/2012), 2011/65/EU, 2004/108/EC,
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Noise/Vibration Information
The measured values of the machine are listed in the table on
page 157.
Noise and vibrational values (vector sum of three directions)
determined according to EN 60745.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of thelevelofexposuretovibrationshouldalso
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
Identify additional safety measures to protect the operator
accessories, keep the hands warm, organisation of work pat-
Mounting and Operation
Battery GSR 10,8 V-EC
GSR 10,8 V-EC HX
Permitted ambient
– when charging
– during operation*
– during storage
batteries GBA 10,8V x.xAh O–.
* Limited performance at temperatures <0 °C
Henk Becker
Executive Vice President
Helmut Heinzelmann
Head of Product Certification
Action Figure Page
Removing the battery 1 158
Inserting the battery 2 158
Mounting application tools 3 158–159
Reversing the rotational direction 4 159
Setting the torque 5 160
Selecting the drilling position 6 160
Gear selection, mechanical 7 160
Mounting/dismounting the belt hook 8 161
Mounting/dismounting the bit holder 9 161
Mounting/dismounting the belt hook and bit holder 10 161
Mounting/dismounting the colour clip 11 162 Page 11 Wednesday, December 4, 2013 9:28 AM
Page: 11
12 | English
2 609 141 137 | (4.12.13) Bosch Power Tools
Maintenance and Cleaning
 For safe and proper working, always keep the machine
and ventilation slots clean.
Clean the application tool, the tool holder, the power tool’s
after using.
After-sales Service and Application
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
Bosch’sapplicationserviceteam willgladlyanswerquestions
concerning our products and their accessories.
clude the 10-digit article number given on the type plate of
the machine.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
UB 9 5HJ
At you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0844) 7360109
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Tel.: (011) 4939375
Fax: (011) 4930126
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Tel.: (031) 7012120
Fax: (031) 7012446
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Tel.: (021) 5512577
Fax: (021) 5513223
Bosch Headquarters
Midrand, Gauteng
Tel.: (011) 6519600
Fax: (011) 6519880
The contained lithium-ion batteries are subject to the Danger-
ous Goods Legislation requirements. The user can transport
the batteries by road without further requirements.
forwarding agency), special requirements on packaging and
labelling must be observed. For preparation of the item being
shipped, consulting an expert for hazardous material is re-
Dispatch batteries only when the housing is undamaged.
Tape or mask off open contacts and pack up the battery in
such a manner that it cannot move around in the packaging.
Please also observe possibly more detailed national regula-
Switching On and Off 12 162
Checking the battery charge condition 13 162
Selecting Accessories – 163
Action Figure Page Page 12 Wednesday, December 4, 2013 9:28 AM
Page: 156
| 157
Bosch Power Tools 2 609 141 137 | (4.12.13)
GSR 10,8 V-EC GSR 10,8 V-EC HX
3 601 JD4 0..
3 602 D94 9.. 3 601 JD4 1..
U V= 10,8 10,8
n0 1 min-1
0 – 400 0 – 400
n0 2 min-1
0 – 1300 0 – 1300
M Nm 20 20
M Nm 18 18
Ø mm 10 10
Ø mm 30 30
Ø mm 7 7
mm 1 – 10 –
mm 10 6,35 (¼")
kg 0,9/1,1* 0,7/0,9*
LwA dB(A) 83 83
LpA dB(A) 72 72
K dB 3 3
ah m/s2
<2,5 <2,5
ah m/s2
<2,5 <2,5
K m/s2
1,5 1,5 Page 157 Wednesday, December 4, 2013 9:28 AM
Page: 157
2 609 141 137 | (4.12.13) Bosch Power Tools
158 |
GSR 10,8 V-EC Page 158 Wednesday, December 4, 2013 9:28 AM
Page: 158
| 159
Bosch Power Tools 2 609 141 137 | (4.12.13)
GSR 10,8 V-EC HX Page 159 Wednesday, December 4, 2013 9:28 AM
Page: 159
2 609 141 137 | (4.12.13) Bosch Power Tools
160 |
Max. Page 160 Wednesday, December 4, 2013 9:28 AM
Page: 160
| 161
Bosch Power Tools 2 609 141 137 | (4.12.13)
8 Page 161 Wednesday, December 4, 2013 9:28 AM
Page: 161
2 609 141 137 | (4.12.13) Bosch Power Tools
162 |
100 %
0 %
100 %
0 % Page 162 Wednesday, December 4, 2013 9:28 AM
Page: 162
| 163
Bosch Power Tools 2 609 141 137 | (4.12.13)
AL 1130 CV
(10,8 V)
2 607 225 134 (EU)
2 607 225 136 (UK)
2 607 225 138 (AU)
AL 1115 CV
(10,8 V)
2 607 225 514 (EU)
2 607 225 516 (UK)
GBA 10,8 V x,xAh O–.
GBA 10,8 V x,xAh O–. Page 163 Wednesday, December 4, 2013 9:28 AM

Question & answers

There are no questions about the Bosch GSR 10,8 V-EC Professional yet.

Ask a question about the Bosch GSR 10,8 V-EC Professional

Have a question about the Bosch GSR 10,8 V-EC Professional but cannot find the answer in the user manual? Perhaps the users of can help you answer your question. By filling in the form below, your question will appear below the manual of the Bosch GSR 10,8 V-EC Professional. Please make sure that you describe your difficulty with the Bosch GSR 10,8 V-EC Professional as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.