Bosch GRL 400 H Professional manual

View a manual of the Bosch GRL 400 H Professional below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Bosch
  • Product: Range finder
  • Model/name: GRL 400 H Professional
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian, Swedish, Portuguese, Danish, Polish, Russian, Norwegian, Finnish, Czech, Romanian, Turkish, Slovak, Greek, Hungarian, Slovene, Croatian, Ukrainian

Table of Contents

Page: 2
3 |
2 610 A13 330 | (5.8.10) Bosch Power Tools
GR 240:
0 601 094 100
19
21
2 610 A01 180
15
1 608 M00 05E
(2 610 A13 782)
1 608 M00 05G
7
LR 1:
0 601 015 400
20
1 608 M00 05A
23
18
BT 300:
0 601 091 400
24
1 608 M00 05F
22
(UK)
2 610 A13 717
(EU)
2 610 A13 716
OBJ_BUCH-1179-001.book Page 3 Thursday, August 5, 2010 10:04 AM
Page: 3
2 610 A13 330 | (5.8.10) Bosch Power Tools
4 |
La
se
r
R
ad
ia
ti
o
n
C
la
ss
2
d
o
n
ot
st
ar
e
in
to
b
ea
m
IE
C
6
0
8
2
5
-1
:2
0
0
7
-0
3
<
1
m
W
,
6
3
5
n
m
4
5
6
3
2
1
7
8
9
11
12
13
14
15
16
(UK)
16
(EU)
17
10
GRL 400 H
Professional
OBJ_BUCH-1179-001.book Page 4 Thursday, August 5, 2010 10:04 AM
Page: 4
5 |
2 610 A13 330 | (5.8.10) Bosch Power Tools
18
19
20
A
OBJ_BUCH-1179-001.book Page 5 Thursday, August 5, 2010 10:04 AM
Page: 16
English | 17
Bosch Power Tools 2 610 A13 330 | (5.8.10)
en
Safety Notes
Rotational Laser Level
Working safely with the measuring
tool is possible only when the
operating and safety information
are read completely and the in-
structions contained therein are
strictly followed. Never make warning labels
on the measuring tool unrecognisable. SAVE
THESE INSTRUCTIONS.
f Caution – The use of other operating or ad-
justing equipment or the application of other
processing methods than those mentioned
here, can lead to dangerous radiation expo-
sure.
f The measuring tool is provided with a warn-
ing label in English (marked with number 14
in the representation of the measuring tool
on the graphics page).
f Do not direct the laser beam at persons or
animals and do not stare into the laser beam
yourself. This measuring tool produces laser
class 2 laser radiation according to
IEC 60825-1. This can lead to persons being
blinded.
f Do not use the laser viewing glasses as safety
goggles. The laser viewing glasses are used for
improved visualisation of the laser beam, but
they do not protect against laser radiation.
f Do not use the laser viewing glasses as sun
glasses or in traffic. The laser viewing glasses
do not afford complete UV protection and
reduce colour perception.
f Have the measuring tool repaired only
through qualified specialists using original
spare parts. This ensures that the safety of
the measuring tool is maintained.
f Do not allow children to use the laser meas-
uring tool without supervision. They could
unintentionally blind other persons or them-
selves.
f Do not operate the measuring tool in explo-
sive environments, such as in the presence
of flammable liquids, gases or dusts. Sparks
can be created in the measuring tool which
may ignite the dust or fumes.
f Do not open the battery pack. Danger of
short-circuiting.
Protect the battery pack against heat,
e.g., against continuous intense sun
light, fire, water, and moisture. Dan-
ger of explosion.
f Keep the battery pack not being used away
from paper clips, coins, keys, nails, screws
or other small metal objects that can make
a connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
f Charge the battery pack only with the bat-
tery charger specified in these operating in-
structions. A charger that is suitable for one
type of battery pack may create a risk of fire
when used with another battery pack.
f Use only original Bosch battery packs with
the voltage listed on the nameplate of your
measuring tool. When using other battery
packs, e.g. imitations, reconditioned battery
packs or other brands, there is danger of
injury as well as property damage through
exploding battery packs.
IEC 60825-1:2007-03
<1mW, 635 nm
OBJ_BUCH-1179-001.book Page 17 Thursday, August 5, 2010 10:04 AM
Page: 17
18 | English
2 610 A13 330 | (5.8.10) Bosch Power Tools
Battery Charger
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
Keep the battery charger away from
rain or moisture. Penetration of water
in the battery charger increases the risk
of an electric shock.
f Do not charge other batteries with the bat-
tery charger. The battery charger is only suit-
able for charging the Bosch battery/battery
pack inserted in the rotational laser level.
Danger of fire and explosion when charging
other batteries/battery packs.
f Keep the battery charger clean. Contamina-
tion can lead to danger of an electric shock.
f Before each use, check the battery charger,
cable and plug. If damage is detected, do
not use the battery charger. Never open the
battery charger yourself. Have repairs per-
formed only by a qualified technician and
only using original spare parts. Damaged
battery chargers, cables and plugs increase
the risk of an electric shock.
f Do not operate the battery charger on easi-
ly inflammable surfaces (e.g., paper, tex-
tiles, etc.) or surroundings. The heating of
the battery charger during the charging proc-
ess can pose a fire hazard.
f Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with wa-
ter. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritations or burns.
f Children should be supervised to ensure that
they do not play with the battery charger.
f Children or persons with mental or physical
limitations may only use the charger under
supervision or after having been instructed.
A thorough introduction reduces operating
errors and injuries.
f Products sold in GB only: Your product is fit-
ted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to
BS 1362).
If the plug is not suitable for your socket out-
lets, it should be cut off and an appropriate
plug fitted in its place by an authorised cus-
tomer service agent. The replacement plug
should have the same fuse rating as the orig-
inal plug.
The severed plug must be disposed of to
avoid a possible shock hazard and should
never be inserted into a mains socket else-
where.
Functional Description
While reading the operating instructions, unfold
the graphics page with the illustration of the ro-
tational laser level and battery charger, and
leave it open.
Intended Use
Rotational Laser Level
The measuring tool is intended for determining
and checking precise horizontal partitions. The
measuring tool is not intended for vertical lev-
eling.
The measuring tool is suitable for outdoor use.
Battery Charger
Use the battery charger only when you fully
understand and can perform all functions with-
out limitation, or have received appropriate
instructions.
OBJ_BUCH-1179-001.book Page 18 Thursday, August 5, 2010 10:04 AM
Page: 18
English | 19
Bosch Power Tools 2 610 A13 330 | (5.8.10)
Technical Data
Rotational Laser Level GRL 400 H
Professional
Article number 3 601 K61 800
Working range (radius)1)
– without laser receiver, approx.
– with laser receiver, approx.
10 m
200 m
Levelling Accuracy1) 2)
±0.08 mm/m
Self-levelling range, typically ±8 % (±5°)
Levelling duration, typically 15 s
Rotational speed 600 min-1
Operating temperature –10 ... +50 °C
Storage temperature –20 ... +70 °C
Relative air humidity, max. 90 %
Laser class 2
Laser type 635 nm, <1 mW
Laser beam Ø at the exit opening, approx.1)
5 mm
Tripod mount (horizontal) 5/8"-11
Batteries (NiMH)
Batteries (alkali-manganese)
2 x 1.2 V HR20 (D) (9 Ah)
2 x 1.5 V LR20 (D)
Operating life time, approx.
– Batteries (NiMH)
– Batteries (alkali-manganese)
30 h
50 h
Weight according to EPTA-Procedure 01/2003 1.8 kg
Dimensions (length x width x height) 183 x 170 x 188 mm
Degree of protection IP 65 (dust-proof and protected
against powerful water jets)
1) at 20 °C
2) alongside the axes
Please observe the article number on the type plate of your measuring tool. The trade names of the individual meas-
uring tools may vary.
The measuring tool can be clearly identified with the serial number 13 on the type plate.
OBJ_BUCH-1179-001.book Page 19 Thursday, August 5, 2010 10:04 AM
Page: 19
20 | English
2 610 A13 330 | (5.8.10) Bosch Power Tools
Product Features
The numbering of the product features refers to
the illustration of the rotational laser level and
battery charger on the graphics page.
1 Automatic levelling indicator
2 On/Off button / shock-warning button
3 Shock-warning indicator
4 Variable laser beam
5 Exit opening for laser beam
6 Charge-control indicator
7 Battery pack
8 Battery compartment
9 Locking knob of the battery compartment
10 Locking knob of the battery pack
11 Socket for charge plug
12 Tripod mount 5/8"
13 Serial number
14 Laser warning label
15 Battery charger
16 Mains plug of the battery charger
17 Charge connector
18 Tripod*
19 Construction laser measuring rod*
20 Laser receiver*
21 Laser viewing glasses*
22 Measuring plate with stand*
23 Holder*
24 Case
* The accessories illustrated or described are not in-
cluded as standard delivery.
Assembly
Power Supply of the Rotational Laser
Level
Operation with Batteries/Rechargeable
Batteries
Using alkali-manganese or rechargeable batter-
ies is recommended for operation of the meas-
uring tool.
To open the battery compartment 8, turn the
locking knob 9 to position and pull out the
battery compartment.
When inserting batteries, pay attention to the
correct polarity according to the representation
on the inside of the battery compartment.
Always replace all batteries at the same time.
Only use batteries from one brand and with the
identical capacity.
Shut the battery compartment 8 and turn the
locking knob 9 to the position.
In case the batteries have been inserted incor-
rectly, the measuring tool cannot be switched
on. Insert the batteries with correct polarity.
f Remove the batteries from the measuring
tool when not using it for extended periods.
When storing for extended periods, the bat-
teries can corrode and discharge themselves.
Battery Charger
Article number 2 610 A13 782
Rated voltage V~ 100–240
Frequency Hz 50/60
Output voltage V= 7.5
Charging current A 1.0
Allowable charging temperature range °C 0–45
Charging time h 14
Number of battery cells 2
Rated voltage (Rechargeable batteries) V= 2 x 1.2
Weight according to EPTA-Procedure 01/2003 kg 0.2
Protection class /II
OBJ_BUCH-1179-001.book Page 20 Thursday, August 5, 2010 10:04 AM
Page: 20
English | 21
Bosch Power Tools 2 610 A13 330 | (5.8.10)
Operation with Battery Pack
Charge the battery pack 7 before using for the
first time. The battery pack can only be charged
with the battery charger 15 intended for it.
f Observe the mains voltage! The voltage of
the power supply must correspond with the
data given on the nameplate of the battery
charger. Battery chargers marked with 230 V
can also be operated with 220 V.
Insert the appropriate mains plug 16 for your
mains supply into the battery charger 15 and al-
low it to engage.
Insert the charge plug 17 of the battery charger
into the socket connector 11 of the battery
pack. Connect the battery charger to the mains
supply. Charging the empty battery pack takes
approx. 14 h. The battery charger and the bat-
tery pack are protected against overcharging.
A battery that is new or has not been used for a
longer period does not develop its full capacity
until after approx. 5 charging/discharging cycles.
Do not charge the battery pack 7 each time after
using, otherwise its capacity will be reduced.
Charge the battery pack only when the charge-
control indicator 6 flashes or lights up continu-
ously.
A considerably reduced operating period after
charging indicates that the battery pack is used
up and must be replaced.
If the battery pack is empty, the measuring tool
can also be operated off of the battery charger
15 when connected to a power supply. Switch
the measuring tool off, charge the battery pack
for approx. 10 min and then switch the measur-
ing tool on again with the battery charger con-
nected.
To change the battery pack 7, turn the locking
knob 10 to position and pull out the battery
pack 7.
Insert a new battery pack and turn the locking
knob 10 to the position.
f Remove the battery pack from the measur-
ing tool when not using it for longer peri-
ods. When storing for longer periods, the re-
chargeable batteries can corrode and
discharge themselves.
Charge-control Indicator
When the charge-control indicator 6 flashes red
for the first time, the measuring tool can still be
operated for approx. 2 h.
When the charge-control indicator 6 lights up
red continuously, measurements are no longer
possible. The measuring tool switches off auto-
matically after 1 minute.
Operation
Starting Operation of the Rotational
Laser Level
f Protect the measuring tool against mois-
ture and direct sun light.
f Do not subject the measuring tool to ex-
treme temperatures or variations in tem-
perature. As an example, do not leave it in
vehicles for longer periods. In case of large
variations in temperature, allow the measur-
ing tool to adjust to the ambient temperature
before putting it into operation. In case of ex-
treme temperatures or variations in tempera-
ture, the accuracy of the measuring tool can
be impaired.
f Avoid heavy impact to or dropping down of
the measuring tool. After severe exterior ef-
fects to the measuring tool, it is recommend-
ed to carry out an accuracy check (see “Lev-
elling Accuracy of the Rotational Laser
Level”, page 23) each time before continuing
to work.
Setting Up the Measuring Tool
Position the measuring tool on a
firm surface or mount it to a tri-
pod 18.
Due to the high levelling accuracy, the measur-
ing tool reacts sensitively to ground vibrations
and position changes. Therefore, pay attention
that the position of the measuring tool is stable
in order to avoid operational interruptions due
to re-levelling.
OBJ_BUCH-1179-001.book Page 21 Thursday, August 5, 2010 10:04 AM
Page: 21
22 | English
2 610 A13 330 | (5.8.10) Bosch Power Tools
Switching On and Off
f Do not direct the laser beam at persons or
animals (especially not at their eye level),
and do not stare into the laser beam your-
self (not even from a distance.) Immediately
after switching on, the measuring tool sends
out the variable laser beam 4.
For switching on the measuring tool, briefly
press the On/Off button 2. The indicators 3, 1
and 6 light up briefly. The measuring tool imme-
diately starts the automatic levelling. During the
levelling, the levelling indicator 1 flashes green,
the laser does not rotate and flashes.
The measuring tool is levelled in as soon as lev-
elling indicator 1 lights up green continuously
and the laser beam is steady. After the levelling
is completed, the measuring tool automatically
starts in rotational operation.
The measuring tool exclusively operates with
fixed rotational speed in rotational operation,
which is also suitable for use of a laser receiver.
When factory set, the shock-warning function is
automatically switched on, and the shock-warn-
ing indicator 3 lights up green.
To switch off the measuring tool, briefly press
the On/Off button 2. When the shock warning
has actuated (shock-warning indicator 3 flashes
red), briefly press the On/Off button once to re-
start the shock-warning function, and then again
to switch off the measuring tool.
f Do not leave the switched on measuring
tool unattended and switch the measuring
tool off after use. Other persons could be
blinded by the laser beam.
To save the batteries, the measuring tool is au-
tomatically switched off when not within the
self-levelling range for more than 2 h or when
the shock warning is actuated for more than 2 h
(see “Automatic Levelling of the Rotational La-
ser Level”, page 22). Reposition the measuring
tool and switch it on again.
Automatic Levelling of the Rotational
Laser Level
After switching on, the measuring tool checks
the horizontal position and automatically com-
pensates irregularities within the self-levelling
range of approx. 8 % (5°).
When the measuring tool is inclined by more
than 8 % after switching on or after a position
change, levelling in is no longer possible. In this
case, the rotor is stopped, the laser flashes and
levelling indicator 1 continuously lights up red.
Reposition the measuring tool and wait for it to
re-level. Without repositioning, the laser is auto-
matically switched off after 2 minutes and the
measuring tool after 2 hours.
When the measuring tool is levelled in, it contin-
uously checks the horizontal position. Automatic
re-levelling takes place after position changes. To
avoid faulty measurements, the rotor stops dur-
ing the levelling process, the laser flashes and
the levelling indicator 1 flashes green.
Shock-warning Function
The measuring tool has a shock-warning function;
after position changes or shock to the measuring
tool, or in case of ground vibrations, it keeps the
measuring tool from levelling in at changed
heights, and thus prevents vertical errors.
When factory set, the shock-warning function is
activated after switching on the measuring tool
(shock-warning indicator 3 lit). The shock warn-
ing is activated approx. 30 s after switching on
the measuring tool or switching on the shock-
warning function.
When the levelling-accuracy range is exceeded
after a position change of the measuring tool or
when heavy ground vibrations are detected, the
shock-warning function is actuated: The rota-
tion is stopped, the laser flashes, the levelling
indicator 1 goes out and the shock-warning indi-
cator 3 flashes red.
When the shock-warning function has actuated,
briefly press the On/Off button 2. The shock-
warning function is restarted and the measuring
tool starts the levelling. As soon as the measur-
ing tool is levelled in (the levelling indicator 1
OBJ_BUCH-1179-001.book Page 22 Thursday, August 5, 2010 10:04 AM
Page: 22
English | 23
Bosch Power Tools 2 610 A13 330 | (5.8.10)
continuously lights up green), it automatically
starts in rotation operation. Now, check the
height of the laser beam with a reference point
and correct the height, if required.
When, after the shock-warning function has ac-
tuated, the function is not restarted by pressing
On/Off button 2, the laser is automatically
switched off after 2 minutes and the measuring
tool after 2 hours.
To switch off the shock-warning function, press
the On/Off button 2 for 3 seconds. When the
shock-warning function has actuated (shock-
warning indicator 3 flashes red), firstly press
the On/Off button briefly, and then again for
3 seconds. When the shock-warning function is
shut off, the shock-warning indicator goes out 3.
To switch on the shock-warning function, press
the On/Off button 2 for 3 seconds. The shock-
warning indicator 3 continuously lights up
green, and the shock-warning function is activat-
ed after 30 seconds.
The shock-warning function setting is stored
when switching off the measuring tool.
Levelling Accuracy of the Rotational
Laser Level
Influences on Accuracy
The ambient temperature has the greatest influ-
ence. Especially temperature differences occur-
ring from the ground upward can divert the laser
beam.
The deviations play a role in excess of approx.
20 m measuring distance and can easily reach
two to four times the deviation at 100 m.
Because the largest difference in temperature
layers is close to the ground, the measuring tool
should always be mounted on a tripod when
measuring distances exceeding 20 m. If possible,
also set up the measuring tool in the centre of the
work area.
Accuracy Check of the Measuring Tool
Apart from exterior influences, device-specific
influences (such as heavy impact or falling
down) can lead to deviations. Therefore, check
the accuracy of the measuring tool each time be-
fore starting your work.
A free measuring distance of 20 m on a firm sur-
face between two walls A and B is required for
the check. A reversal measurement must be car-
ried out over both axes X and Y (each positive
and negative; 4 complete measurements).
– Mount the measuring tool onto a tripod, or
place it on a firm and level surface close to
wall A. Switch the measuring tool on.
– After the levelling, mark the centre of the la-
ser beam on wall A (point I).
– Rotate the measuring tool by 180°, allow it
to level in and mark the centre point of the la-
ser beam on the apposing wall B (point II).
A B
20 m
A B
180°
OBJ_BUCH-1179-001.book Page 23 Thursday, August 5, 2010 10:04 AM
Page: 23
24 | English
2 610 A13 330 | (5.8.10) Bosch Power Tools
– Without turning the measuring tool, position
it close to wall B. Switch the measuring tool
on and allow it to level in.
– Align the height of the measuring tool (using
the tripod or by propping), so that the centre
of the laser beam runs exactly against the
previously marked point II on wall B.
– Rotate the measuring tool by 180° without
changing the height. Allow it to level in and
mark the centre point of the laser beam on
wall A (point III). Take care that point III is as
vertical as possible above or below point I.
– The difference d of both marked points I and
III on wall A amounts to the actual deviation
of the measuring tool for the measured axis.
Repeat the measuring procedure for the other
three axes. For this, turn the measuring tool
prior to each measuring procedure by 90°.
On the measuring section of 2 x 20 m = 40 m,
the maximum allowable deviation is:
40 m x ±0.08 mm/m = ±3.2 mm.
Consequently, the difference d between points I
and III for each of the four individual measure-
ments may not exceed 3.2 mm max.
If the measuring tool should exceed the maxi-
mum deviation in anyone of the four measuring
procedures, have it checked at a Bosch after-
sales service agent.
Working Advice
f Always use the centre of the laser line for
marking. The width of the laser line changes
with the distance.
Laser Viewing Glasses (Accessory)
The laser viewing glasses filter out the ambient
light. This makes the red light of the laser appear
brighter for the eyes.
f Do not use the laser viewing glasses as safety
goggles. The laser viewing glasses are used for
improved visualisation of the laser beam, but
they do not protect against laser radiation.
f Do not use the laser viewing glasses as sun
glasses or in traffic. The laser viewing glass-
es do not afford complete UV protection and
reduce colour perception.
Working with the Laser Receiver (Accessory)
Under unfavourable light conditions (bright en-
vironment, direct sunlight) and for larger dis-
tances, use the laser receiver for improved find-
ing of the laser beam 20.
Before working with the laser receiver, read and
observe the laser receiver operating instructions.
Working with the Tripod (Accessory)
The measuring tool is equipped with a 5/8" tri-
pod mount for horizontal operation on a tripod.
Place the measuring tool via the tripod mount
12 onto the 5/8" male thread of the tripod and
screw the locking screw of the tripod tight.
On a tripod 18 with a measuring scale on the el-
evator column, the height difference can be ad-
justed directly.
A B
A B
180°
OBJ_BUCH-1179-001.book Page 24 Thursday, August 5, 2010 10:04 AM
Page: 24
English | 25
Bosch Power Tools 2 610 A13 330 | (5.8.10)
Working with the Measuring Plate (Accessory)
With the measure-
ment plate 22, you can
project the laser
height onto a wall.
With the zero field and
the scale, the offset or
drop to the required
height can be meas-
ured and projected at
another location. This eliminates the necessity
of precisely adjusting the measuring tool to the
height to be projected.
The measuring plate 22 has a reflective coating
that enhances the visibility of the laser beam at
greater distances or in intense sunlight. The
brightness intensification can be seen only
when viewing, parallel to the laser beam, onto
the measuring plate.
Working with the Measuring Rod (Accessory)
For checking irregularities or projecting gradi-
ents, it is recommended to use the measuring
rod 19 together with the laser receiver.
A relative millimeter scale (±50 cm) is marked
on the top of the measuring rod 19. Its zero
height can be preset at the bottom of the eleva-
tor column. This allows for direct reading of de-
viations from the specified height.
Work Examples
Checking the Depth of Building Pits
(see figure A)
Position the measuring tool on a firm surface or
mount it to a tripod 18.
Working with tripod: Align the laser beam to the
requested height. Project or check the height at
the target location.
Working without tripod: Determine the height
difference between the laser beam and the
height at the reference point with help of the
measurment plate 22. Project or check the meas-
ured height difference at the target location.
When measuring over long distances, the meas-
uring tool should always be set up in the centre
of the work surface and on a tripod, in order to
reduce interferences.
When working on unsafe ground, mount the
measuring tool onto the tripod 18. Take care
that the shock-warning function is activated, in
order to avoid faulty measurements in case of
ground vibrations or shock to the measuring
tool.
30 mm
OBJ_BUCH-1179-001.book Page 25 Thursday, August 5, 2010 10:04 AM
Page: 25
26 | English
2 610 A13 330 | (5.8.10) Bosch Power Tools
Overview of Indications
Maintenance and Service
Maintenance and Cleaning
Keep the rotational laser level and battery charg-
er clean at all times.
Do not immerse the rotational laser level and
battery charger into water or other fluids.
Wipe off debris using a moist and soft cloth. Do
not use any cleaning agents or solvents.
Particularly clean the surfaces at the outlet
opening of the rotational laser level regularly
and pay attention for any lint.
If the rotational laser level or battery charger
should fail despite the care taken in manufac-
ture and testing, repair should be carried out by
an authorised customer services agent for
Bosch power tools. Do not open the rotational
laser level and the battery charger yourself.
In all correspondence and spare parts orders,
please always include the 10-digit article
number given on the type plate of the rotational
laser level and battery charger.
Laser
beam
Rotation
of
the
laser
green red green red
Switching on the measuring tool
(1 s self-check) z z z
Levelling in or re-levelling 2x/s  2x/s
Measuring tool levelled in/ready for opera-
tion z z z
Self-levelling range exceeded 2x/s  z
Shock-warning function activated z
Shock warning actuated 2x/s  2x/s
Battery voltage for ≤2 h operation 2x/s
Battery empty   z
2x/s
z

Flashing frequency (twice per second)
Continuous operation
Function stopped
OBJ_BUCH-1179-001.book Page 26 Thursday, August 5, 2010 10:04 AM
Page: 26
English | 27
Bosch Power Tools 2 610 A13 330 | (5.8.10)
After-sales Service and Customer
Assistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
found under:
www.bosch-pt.com
Our customer service representatives can an-
swer your questions concerning possible appli-
cations and adjustment of products and acces-
sories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: +61 (01300) 307 044
Fax: +61 (01300) 307 045
Inside New Zealand:
Phone: +64 (0800) 543 353
Fax: +64 (0800) 428 570
Outside AU and NZ:
Phone: +61 (03) 9541 5555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: +27 (011) 6 51 96 00
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: +27 (011) 4 93 93 75
Fax: +27 (011) 4 93 01 26
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: +27 (031) 7 01 21 20
Fax: +27 (031) 7 01 24 46
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: +27 (021) 5 51 25 77
Fax: +27 (021) 5 51 32 23
E-Mail: bsc@zsd.co.za
Bosch Headquarters
Midrand, Gauteng
Tel.: +27 (011) 6 51 96 00
Fax: +27 (011) 6 51 98 80
E-Mail: rbsa-hq.pts@za.bosch.com
People’s Republic of China
Website: www.bosch-pt.com.cn
China Mainland
Bosch Power Tools (China) Co., Ltd.
567, Bin Kang Road
Bin Jiang District 310052
Hangzhou, P.R.China
Service Hotline: 400 8 26 84 84
Tel.: +86 (571) 87 77 43 38
Fax: +86 (571) 87 77 45 02
HK and Macau Special Administrative Regions
Robert Bosch Hong Kong Co. Ltd.
21st Floor, 625 King’s Road
North Point, Hong Kong
Customer Service Hotline: +852 (21) 02 02 35
Fax: +852 (25) 90 97 62
E-Mail: info@hk.bosch.com
www.bosch-pt.com.cn
OBJ_BUCH-1179-001.book Page 27 Thursday, August 5, 2010 10:04 AM
Page: 27
28 | English
2 610 A13 330 | (5.8.10) Bosch Power Tools
Indonesia
PT. Multi Tehaka
Kawasan Industri Pulogadung
Jalan Rawa Gelam III No. 2
Jakarta 13930
Indonesia
Tel.: +62 (21) 46 83 25 22
Fax: +62 (21) 46 82 86 45/68 23
E-Mail: sales@multitehaka.co.id
www.multitehaka.co.id
Philippines
Robert Bosch, Inc.
28th Floor Fort Legend Towers,
3rd Avenue corner 31st Street,
Fort Bonifacio Global City,
1634 Taguig City, Philippines
Tel.: +63 (2) 870 3871
Fax: +63 (2) 870 3870
matheus.contiero@ph.bosch.com
www.bosch-pt.com.ph
Bosch Service Center:
9725-27 Kamagong Street
San Antonio Village
Makati City, Philippines
Tel.: +63 (2) 899 9091
Fax: +63 (2) 897 6432
rosalie.dagdagan@ph.bosch.com
Malaysia
Robert Bosch (S.E.A.) Pte. Ltd.
No. 8A, Jalan 13/6
G.P.O. Box 10818
46200 Petaling Jaya
Selangor, Malaysia
Tel.: +60 (3) 7966 3194
Fax: +60 (3) 7958 3838
cheehoe.on@my.bosch.com
Toll-Free: 1800 880 188
www.bosch-pt.com.my
Thailand
Robert Bosch Ltd.
Liberty Square Building
No. 287, 11 Floor
Silom Road, Bangrak
Bangkok 10500
Tel.: +66 (2) 6 31 18 79 – 18 88 (10 lines)
Fax: +66 (2) 2 38 47 83
Robert Bosch Ltd., P. O. Box 2054
Bangkok 10501, Thailand
Bosch Service – Training Centre
2869-2869/1 Soi Ban Kluay
Rama IV Road (near old Paknam Railway)
Prakanong District
10110 Bangkok
Thailand
Tel.: +66 (2) 6 71 78 00 – 4
Fax: +66 (2) 2 49 42 96
Fax: +66 (2) 2 49 52 99
Singapore
Robert Bosch (SEA) Pte. Ltd.
11 Bishan Street 21
Singapore 573943
Tel.: +65 6571 2772
Fax: +65 6350 5315
leongheng.leow@sg.bosch.com
Toll-Free: 1800 333 8333
www.bosch-pt.com.sg
Vietnam
Robert Bosch Vietnam Co. Ltd
10/F, 194 Golden Building
473 Dien Bien Phu Street
Ward 25, Binh Thanh District
84 Ho Chi Minh City
Vietnam
Tel.: +84 (8) 6258 3690 ext. 413
Fax: +84 (8) 6258 3692
hieu.lagia@vn.bosch.com
www.bosch-pt.com
OBJ_BUCH-1179-001.book Page 28 Thursday, August 5, 2010 10:04 AM
Page: 28
English | 29
Bosch Power Tools 2 610 A13 330 | (5.8.10)
Disposal
The rotational laser level, battery charger,
accessories and packaging should be sorted for
environmental-friendly recycling.
Do not dispose of the rotational laser level, bat-
tery charger and battery packs/batteries into
household waste!
Only for EC countries:
According to the European Guide-
line 2002/96/EC, measuring tools
that are no longer usable, and
according to the European Guide-
line 2006/66/EC, defective or
used battery packs/batteries, must be collected
separately and disposed of in an environmen-
tally correct manner.
Batteries no longer suitable for use can be
directly returned at:
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
Battery packs/batteries:
Ni-MH: Nickel metal hydride
Subject to change without notice.
OBJ_BUCH-1179-001.book Page 29 Thursday, August 5, 2010 10:04 AM

Question & answers

There are no questions about the Bosch GRL 400 H Professional yet.

Ask a question about the Bosch GRL 400 H Professional

Have a question about the Bosch GRL 400 H Professional but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Bosch GRL 400 H Professional. Please make sure that you describe your difficulty with the Bosch GRL 400 H Professional as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.