Bosch GOP 250 CE Professional manual

View a manual of the Bosch GOP 250 CE Professional below. All manuals on can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Bosch
  • Product: Cutting machine
  • Model/name: GOP 250 CE Professional
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian, Swedish, Portuguese, Danish, Polish, Russian, Norwegian, Finnish, Czech, Romanian, Turkish, Slovak, Greek, Hungarian, Slovene, Croatian, Ukrainian,

Table of Contents

Page: 3
2 609 140 769 | (8.7.10) Bosch Power Tools
4 |
GOP 250 CE
5 Page 4 Thursday, July 8, 2010 10:58 AM
Page: 4
5 |
2 609 140 769 | (8.7.10) Bosch Power Tools
GAS 25
GAS 50
GAS 50 M
1 609 200 933
Ø 19 mm:
2 607 002 161 (3 m)
2 607 002 162 (5 m)
A Page 5 Thursday, July 8, 2010 10:58 AM
Page: 15
16 | English
2 609 140 769 | (8.7.10) Bosch Power Tools
Safety Notes
General Power Tool Safety Warnings
Read all safety warnings and all
instructions. Failure to follow
the warnings and instructions may result in elec-
tric shock, fire and/or serious injury.
Save all warnings and instructions for future
The term “power tool” in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Clut-
tered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed
(grounded) power tools. Unmodified
plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes, radia-
tors, ranges and refrigerators. There is
an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool
will increase the risk of electric shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges and moving parts.
Damaged or entangled cords increase the
risk of electric shock.
e) When operating a power tool outdoors,
use an extension cord suitable for out-
door use. Use of a cord suitable for out-
door use reduces the risk of electric shock.
f) If operating a power tool in a damp loca-
tion is unavoidable, use a residual current
device (RCD) protected supply. Use of an
RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment
of inattention while operating power tools
may result in serious personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protec-
tion used for appropriate conditions will
reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or bat-
tery pack, picking up or carrying the tool.
Carrying power tools with your finger on
the switch or energising power tools that
have the switch on invites accidents.
d) Remove any adjusting key or wrench be-
fore turning the power tool on. A wrench
or a key left attached to a rotating part
of the power tool may result in personal
e) Do not overreach. Keep proper footing
and balance at all times. This enables
better control of the power tool in unex-
pected situations.
f) Dress properly. Do not wear loose cloth-
ing or jewellery. Keep your hair, clothing
and gloves away from moving parts.
Loose clothes, jewellery or long hair can
be caught in moving parts.
g) If devices are provided for the connec-
tion of dust extraction and collection fa-
cilities, ensure these are connected and
properly used. Use of dust collection can
reduce dust-related hazards.
WARNING Page 16 Thursday, July 8, 2010 10:58 AM
Page: 16
English | 17
Bosch Power Tools 2 609 140 769 | (8.7.10)
4) Power tool use and care
a) Do not force the power tool. Use the cor-
rect power tool for your application. The
correct power tool will do the job better
and safer at the rate for which it was de-
b) Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch
is dangerous and must be repaired.
c) Disconnect the plug from the power
source and/or the battery pack from the
power tool before making any adjust-
ments, changing accessories, or storing
power tools. Such preventive safety
measures reduce the risk of starting the
power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfa-
miliar with the power tool or these in-
structions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for mis-
alignment or binding of moving parts,
breakage of parts and any other condi-
tion that may affect the power tool’s op-
eration. If damaged, have the power tool
repaired before use. Many accidents are
caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Prop-
erly maintained cutting tools with sharp
cutting edges are less likely to bind and
are easier to control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qual-
ified repair person using only identical
replacement parts. This will ensure that
the safety of the power tool is maintained.
Safety Warnings for Precision Saw
f Hold power tool by insulated gripping sur-
faces, when performing an operation where
the cutting accessory may contact hidden
wiring. Cutting accessory contacting a “live”
wire may make exposed metal parts of the
power tool “live” and could give the operator
an electric shock.
f Use the machine only for dry sanding.
Penetration of water into the machine in-
creases the risk of an electric shock.
f Keep hands away from the sawing range.
Do not reach under the workpiece. Contact
with the saw blade can lead to injuries.
f Use suitable detectors to determine if utility
lines are hidden in the work area or call the
local utility company for assistance. Contact
with electric lines can lead to fire and electric
shock. Damaging a gas line can lead to explo-
sion. Penetrating a water line causes property
damage or may cause an electric shock.
f When working with the machine, always
hold it firmly with both hands and provide
for a secure stance. The power tool is guided
more secure with both hands.
f Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held
more secure than by hand.
f Keep your workplace clean. Blends of mate-
rials are particularly dangerous. Dust from
light alloys can burn or explode.
f Never use the machine with a damaged ca-
ble. Do not touch the damaged cable and
pull the mains plug when the cable is dam-
aged while working. Damaged cables in-
crease the risk of an electric shock.
f Wear protective gloves when changing ap-
plication tools/accessories. Application
tools/accessories become hot after pro-
longed usage.
f Do not scrape wetted materials (e. g. wall-
paper) or on moist surfaces. Penetration of
water into the machine increases the risk of
an electric shock. Page 17 Thursday, July 8, 2010 10:58 AM
Page: 17
18 | English
2 609 140 769 | (8.7.10) Bosch Power Tools
f Do not treat the surface to be worked with
solvent-containing fluids. Materials being
warmed up by the scraping can cause toxic
vapours to develop.
f Exercise extreme caution when handling
the scraper. The accessory is very sharp;
danger of injury.
f Products sold in GB only: Your product is
fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to
BS 1362).
If the plug is not suitable for your socket out-
lets, it should be cut off and an appropriate
plug fitted in its place by an authorised cus-
tomer service agent. The replacement plug
should have the same fuse rating as the
original plug.
The severed plug must be disposed of to
avoid a possible shock hazard and should
never be inserted into a mains socket else-
Products sold in AUS and NZ only: Use a
residual current device (RCD) with a rated
residual current of 30 mA or less.
Functional Description
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or
serious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
Intended Use
The machine is intended for sawing and cutting
wooden materials, plastic, gypsum, non-ferrous
metals and fastening elements (e.g., unhardened
nails, staples). It is also suitable for working soft
wall tiles, as well as for dry sanding and scraping
of small surfaces. It is especially suitable for
working close to edges and for flush cutting.
Operate the power tool exclusively with Bosch
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
1 On/Off switch
2 Thumbwheel for orbit frequency preselec-
3 Venting slots
4 Tool holder
5 Handle (insulated gripping surface)
6 Plunge saw blade*
7 Clamping bolt with spring washer
8 Allen key
9 Adapter for tool holder
10 Sanding plate*
11 Sanding sheet*
12 Felt ring of the dust extraction*
13 Retaining clip of the dust extraction*
14 Vacuum connection*
15 Dust extraction*
16 Vacuum hose*
17 Extraction adapter*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program. Page 18 Thursday, July 8, 2010 10:58 AM
Page: 18
English | 19
Bosch Power Tools 2 609 140 769 | (8.7.10)
Technical Data
Noise/Vibration Information
Measured sound values determined according
to EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 81 dB(A);
Sound power level 92 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Sanding: Vibration emission value ah=2 m/s2
uncertainty K=1.5 m/s2
Cutting with plunge cut saw blade: Vibration
emission value ah=10 m/s2
, uncertainty
K=1.5 m/s2
Cutting with segmential saw blade: Vibration
emission value ah=6.5 m/s2
, uncertainty
K=1.5 m/s2
Scraping: Vibration emission value ah=4.5 m/s2
uncertainty K=1.5 m/s2
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Declaration of Conformity
We declare under our sole responsibility that
the product described under “Technical Data” is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 2006/42/EC.
Technical file at:
Robert Bosch GmbH, PT/ESC
D-70745 Leinfelden-Echterdingen
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 01.07.2010
Precision Saw GOP 250 CE
Article number 3 601 B30 000
Preselection of
orbital stroke rate z
Rated power input W 250
Output power W 150
No-load speed n0 min-1
Oscillation angle,
left/right ° 1.4
Weight according to
01/2003 kg 1.5
Protection class /II
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Dr. Egbert Schneider
Senior Vice President
Dr. Eckerhard Strötgen
Head of Product
Certification Page 19 Thursday, July 8, 2010 10:58 AM
Page: 19
20 | English
2 609 140 769 | (8.7.10) Bosch Power Tools
Changing the Tool
f Before any work on the machine itself, pull
the mains plug.
f Wear protective gloves when changing
application tools/accessories. Contact with
the application tool/accessoriy can lead to
Selecting the Application Tool/Accessory
Mounting/Replacing the Application Tool/
If required, remove an already mounted applica-
tion tool/accessory.
For removing the application tool/accessory,
loosen the screw 7 with the Allen key 8 and re-
move the application tool/accessory.
Mount the requested application tool/accessory
(e.g. plunge cut saw blade 6) in such a manner
on the tool holder 4 that the offset faces down-
ward (see illustration on the graphics page;
marking on the application tool/accessory is
readable from above).
Turn the application tool/accessory to a position
favourable for the respective job, and allow it to
engage into the cams of the tool holder 4. 12 dif-
ferent positions are possible, each offset by 30°.
For more intermediate positions, the adapter 9
(accessory) can be used: Allow the adapter to
engage with the smooth side onto the cams of
the tool holder 4 (see illustration on the graph-
ics page). Position the application tool/accesso-
ry onto the adapter in any position.
Fasten the application tool/accessory with bolt 7.
Tighten the bolt with Allen key 8 until the spring
washer of the bolt faces flush against the applica-
tion tool/accessory.
f Check the tight seating of the application
tool/accessory. Incorrect or not securely fas-
tened application tools/accessories can come
loose during operation and pose a hazard.
Accessory Material
HCS wood
Wooden mate-
rials, plastic
saw blade*
Wooden mate-
rials, plastic,
HCS plunge
cut saw
Wooden mate-
rials, plastic,
gypsum and
other soft ma-
BIM plunge
cut saw
Metal (e.g.
nails, screws,
smaller pro-
files), non-fer-
rous metals
BIM plunge
cut saw
blade, wood
and metal*
Wood, metal,
HM-Riff seg-
ment saw
joints, soft
wall tiles,
glass-fibre re-
inforces plas-
tic and other
abrasive mate-
* Optional accessory; for the complete accessories
please see Bosch accessory programme.
Silicone and
other elastic
Base plate
for sanding,
series Delta
93 mm*
Depends on
sanding sheet
Accessory Material
* Optional accessory; for the complete accessories
please see Bosch accessory programme. Page 20 Thursday, July 8, 2010 10:58 AM
Page: 20
English | 21
Bosch Power Tools 2 609 140 769 | (8.7.10)
Mounting/Replacing a Sanding Sheet on the
Sanding Plate
The sanding plate 10 is fitted with Velcro back-
ing for quick and easy fastening of sanding
sheets with Velcro adhesion.
Before attaching the sanding sheet 11, free the
Velcro backing of the sanding plate 10 from any
debris by tapping against it in order to enable
optimum adhesion.
Position the sanding sheet 11 flush alongside one
edge of the sanding plate 10, then lay the sanding
sheet onto the sanding plate and press firmly.
To ensure optimum dust extraction, pay atten-
tion that the punched holes in the sanding sheet
match with the holes in the sanding plate.
To remove the sanding sheet 11, grasp it at
one of the tips and pull it off from the sanding
plate 10.
You can use all sanding sheets, fleece pads/
polishing cloth pads of the Delta 93 mm series
of Bosch accessory program.
Sanding accessories, such as fleece pads/
polishing cloth pads, are attached to the sand-
ing plate in the same manner.
Selecting the Sanding Sheet
Depending on the material to be worked and the required rate of material removal, different sanding
sheets are available:
Dust/Chip Extraction
f Dusts from materials such as lead-containing
coatings, some wood types, minerals and
metal can be harmful to one’s health. Touch-
ing or breathing-in the dusts can cause aller-
gic reactions and/or lead to respiratory infec-
tions of the user or bystanders.
Certain dusts, such as oak or beech dust, are
considered as carcinogenic, especially in
connection with wood-treatment additives
(chromate, wood preservative). Materials
containing asbestos may only be worked by
– As far as possible, use a dust extraction
system suitable for the material.
– Provide for good ventilation of the work-
ing place.
– It is recommended to wear a P2 filter-
class respirator.
Observe the relevant regulations in your
country for the materials to be worked.
Sanding disc Material Application Grain size
Red quality
– All wooden materi-
als (e.g., hard-
wood, softwood,
chipboard, building
– Metal materials
For coarse-sanding, e.g. of rough,
unplaned beams and boards
coarse 40
For face sanding and planing small
medium 80
For finish and fine sanding of wood fine 180
White quality
– Paint
– Varnish
– Filling compound
– Filler
For sanding off paint coarse 40
For sanding primer (e.g., for removing
brush dashes, drops of paint and paint
medium 80
For final sanding of primers before
fine 180
320 Page 21 Thursday, July 8, 2010 10:58 AM
Page: 21
22 | English
2 609 140 769 | (8.7.10) Bosch Power Tools
Connecting the Dust Extraction (see figure A)
For sanding, always connect dust extraction.
Remove the application tool/accessory when
mounting the dust extraction 15 (accessory).
If required, assemble the parts of the dust ex-
traction 15 as shown in the figure. Position the
assembled dust extraction onto the machine via
the tool holder 4. Turn the dust extraction in
such a manner that the cams of the dust extrac-
tion engage into the corresponding recesses on
the housing. Fasten the dust extraction to the
machine with the retaining clip 13 as shown in
the figure.
Pay attention that the felt ring 12 is undamaged
and faces tightly against the sanding plate 10.
Replace a damage felt ring immediately.
Depending on machine version, place a vacuum
hose 16 (accessory) either directly onto the vac-
uum connection 14 or cut off the old hose end,
screw the extraction adapter 17 (accessory) on-
to the hose end and then place it directly onto
the vacuum connection 14. Connect the vacuum
hose 16 with a vacuum cleaner (accessory). An
overview for the connection of various vacuum
cleaners can be found on the fold-out page.
The vacuum cleaner must be suitable for the ma-
terial being worked.
When vacuuming dry dust that is especially det-
rimental to health or carcinogenic, use a special
vacuum cleaner.
f Observe correct mains voltage! The voltage
of the power source must agree with the
voltage specified on the nameplate of the
machine. Power tools marked with 230 V
can also be operated with 220 V.
Starting Operation
Switching On and Off
To start the machine, push the On/Off switch 1
forward so that the “I” is indicated on the switch.
To switch off the machine, push the On/Off
switch 1 toward the rear so that the “0” is indi-
cated on the switch.
Preselecting the Orbital Stroke Rate
With the thumbwheel for preselection of the or-
bital stroke rate 2, you can preselect the required
orbital stroke rate, even during operation.
The required stroke rate depends on the materi-
al and the working conditions and can be deter-
mined through practical testing.
Working Advice
Note: Do not cover off the venting slots 3 of the
machine while working, as this reduces the
working life of the machine.
Operating Principle
Due to the oscillating drive the application
tool/accessory swings up to 20000 times per
minute for 2.8°. This allows for precise work in
narrow spaces.
Work with low and uniform appli-
cation pressure, otherwise, the
working performance will decline
and the application tool can be-
come blocked.
While working, move the machine
back and forth, so that the appli-
cation tool does not heat up ex-
cessively and become blocked.
f Use undamaged faultless saw blades only.
Deformed, blunt saw blades or saw blades
that are otherwise damaged can break.
f When sawing light building materials, ob-
serve the statutory provisions and the rec-
ommendations of the material suppliers.
f Plunge cuts may only be applied to soft ma-
terials, such as wood, gypsum plaster
boards, etc.!
Before sawing with HCS saw blades in wood,
particle board, building materials, etc., check
these for foreign objects such as nails, screws,
or similar. If required, remove foreign objects or
use BIM saw blades. Page 22 Thursday, July 8, 2010 10:58 AM
Page: 22
English | 23
Bosch Power Tools 2 609 140 769 | (8.7.10)
Note: When separating wall tiles take into con-
sideration that the application tools/accesso-
ries wear heavily when used for longer periods
of time.
The removal rate and the sanding pattern are
primarily determined by the choice of sanding
sheet, the preset oscillation rate and the ap-
plied pressure.
Only flawless sanding sheets achieve good
sanding capacity and extend the service life of
the machine.
Pay attention to apply uniform sanding pressure;
this increases the working life of the sanding
Intensifiying the sanding pressure does not lead
to an increase of the sanding capacity, but to in-
creased wear of the machine and the sanding
For precise on-the-spot sanding of edges, corners
and hard to reach areas, it is also possible to work
only with the tip or an edge of the sanding plate.
When selectively sanding on the spot, the sand-
ing sheet can heat up considerably. Reduce the
orbital stroke rate and allow the sanding sheet
to cool down regularly.
A sanding sheet that has been used for metal
should not be used for other materials.
Use only original Bosch sanding accessories.
For sanding, always connect dust extraction.
For scraping, select a high oscillation rate.
Work on a soft surface (e.g. wood) at a flat ange,
and apply only light pressure. Otherwise the
scraper can cut into the surface.
Maintenance and Service
Maintenance and Cleaning
f Before any work on the machine itself, pull
the mains plug.
f For safe and proper working, always keep
the machine and ventilation slots clean.
Clean Riff application tools (accessory) regular-
ly with a wire brush.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts order,
please always include the 10-digit article
number given on the type plate of the machine.
After-sales Service and Customer
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be found
Our customer service representatives can answer
your questions concerning possible applications
and adjustment of products and accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88 Page 23 Thursday, July 8, 2010 10:58 AM
Page: 23
24 | English
2 609 140 769 | (8.7.10) Bosch Power Tools
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: +61 (01300) 307 044
Fax: +61 (01300) 307 045
Inside New Zealand:
Phone: +64 (0800) 543 353
Fax: +64 (0800) 428 570
Outside AU and NZ:
Phone: +61 (03) 9541 5555
Republic of South Africa
Customer service
Hotline: +27 (011) 6 51 96 00
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Tel.: +27 (011) 4 93 93 75
Fax: +27 (011) 4 93 01 26
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Tel.: +27 (031) 7 01 21 20
Fax: +27 (031) 7 01 24 46
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Tel.: +27 (021) 5 51 25 77
Fax: +27 (021) 5 51 32 23
Bosch Headquarters
Midrand, Gauteng
Tel.: +27 (011) 6 51 96 00
Fax: +27 (011) 6 51 98 80
People’s Republic of China
China Mainland
Bosch Power Tools (China) Co., Ltd.
567, Bin Kang Road
Bin Jiang District 310052
Hangzhou, P.R.China
Service Hotline: 800 8 20 84 84
Tel.: +86 (571) 87 77 43 38
Fax: +86 (571) 87 77 45 02
HK and Macau Special Administrative Regions
Robert Bosch Hong Kong Co. Ltd.
21st Floor, 625 King’s Road
North Point, Hong Kong
Customer Service Hotline: +852 (21) 02 02 35
Fax: +852 (25) 90 97 62
PT. Multi Tehaka
Kawasan Industri Pulogadung
Jalan Rawa Gelam III No. 2
Jakarta 13930
Tel.: +62 (21) 46 83 25 22
Fax: +62 (21) 46 82 86 45/68 23
Robert Bosch, Inc.
28th Floor Fort Legend Towers,
3rd Avenue corner 31st Street,
Fort Bonifacio Global City,
1634 Taguig City, Philippines
Tel.: +63 (2) 870 3871
Fax: +63 (2) 870 3870
Bosch Service Center:
9725-27 Kamagong Street
San Antonio Village
Makati City, Philippines
Tel.: +63 (2) 899 9091
Fax: +63 (2) 897 6432 Page 24 Thursday, July 8, 2010 10:58 AM
Page: 24
English | 25
Bosch Power Tools 2 609 140 769 | (8.7.10)
Robert Bosch (S.E.A.) Pte. Ltd.
No. 8A, Jalan 13/6
G.P.O. Box 10818
46200 Petaling Jaya
Selangor, Malaysia
Tel.: +60 (3) 7966 3194
Fax: +60 (3) 7958 3838
Toll-Free: 1800 880 188
Robert Bosch Ltd.
Liberty Square Building
No. 287, 11 Floor
Silom Road, Bangrak
Bangkok 10500
Tel.: +66 (2) 6 31 18 79 – 18 88 (10 lines)
Fax: +66 (2) 2 38 47 83
Robert Bosch Ltd., P. O. Box 2054
Bangkok 10501, Thailand
Bosch Service – Training Centre
2869-2869/1 Soi Ban Kluay
Rama IV Road (near old Paknam Railway)
Prakanong District
10110 Bangkok
Tel.: +66 (2) 6 71 78 00 – 4
Fax: +66 (2) 2 49 42 96
Fax: +66 (2) 2 49 52 99
Robert Bosch (SEA) Pte. Ltd.
11 Bishan Street 21
Singapore 573943
Tel.: +65 6571 2772
Fax: +65 6350 5315
Toll-Free: 1800 333 8333
Robert Bosch Vietnam Co. Ltd
10/F, 194 Golden Building
473 Dien Bien Phu Street
Ward 25, Binh Thanh District
84 Ho Chi Minh City
Tel.: +84 (8) 6258 3690 ext. 413
Fax: +84 (8) 6258 3692
The machine, accessories and packaging should
be sorted for environmental-friendly recycling.
Do not dispose of power tools into household
Only for EC countries:
According the European Guideline
2002/96/EC for Waste Electrical
and Electronic Equipment and its
implementation into national
right, power tools that are no
longer usable must be collected
separately and disposed of in an
environmentally correct manner.
Subject to change without notice. Page 25 Thursday, July 8, 2010 10:58 AM

Question & answers

There are no questions about the Bosch GOP 250 CE Professional yet.

Ask a question about the Bosch GOP 250 CE Professional

Have a question about the Bosch GOP 250 CE Professional but cannot find the answer in the user manual? Perhaps the users of can help you answer your question. By filling in the form below, your question will appear below the manual of the Bosch GOP 250 CE Professional. Please make sure that you describe your difficulty with the Bosch GOP 250 CE Professional as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.