Bosch GML 24 V-CD manual

View a manual of the Bosch GML 24 V-CD below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Bosch
  • Product: CD-player
  • Model/name: GML 24 V-CD
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian, Swedish, Portuguese, Danish, Norwegian, Finnish, Turkish

Table of Contents

Page: 15
English–1
1 609 929 J80 • 06.03
Safety Rules
Read all instructions. Failure to
follow all instructions listed below
may result in electric shock, fire and/or serious in-
jury. The term “electrical device”, as used in the fol-
lowing, refers to mains operated electrical devices
(corded) and to battery operated (cordless) electri-
cal devices.
In these operating instructions the radio charger is
also referred to as an electric device or as a
charger.
Save these instructions.
1) Work area
a) Keep work area clean and well lit. Cluttered
and dark work areas invite accidents.
b) Do not operate the unit on easily inflam-
mable surfaces (e. g. paper, textiles, etc.)
or in inflammable environments. Fire haz-
ard due to occurring heat build-up.
2) Electrical Safety
a) The plugs of electrical devices must
match the outlet. Never modify the plug in
any way. Do not use any adapter plugs
with earthed (grounded) electrical devic-
es. Unmodified plugs and matching outlets
will reduce the risk of electric shock.
b) Do not misuse the cord. Never use the
cord for carrying, pulling or unplugging
the electrical device. Keep cord away from
heat, oil, sharp edges and moving parts.
Damaged or entangled cords increase the
risk of electric shock.
c) When operating an electrical device out-
doors, use an extension cord suitable for
outdoor use. Use of a cord suitable for out-
door use reduces the risk of electric shock.
d) Connect electrical devices that are used
outdoors via a residual current device
(RCD).
e) Connect the electrical device to a mains
supply that is properly connected to earth.
Socket and extension cord must have an op-
erative protective conductor.
f) Protect the electrical device from rain and
moisture. The penetration of water in a bat-
tery charger increases the risk of electric
shock.
g) Do not charge the batteries of other man-
ufacturers. Danger of fire and explosion. The
device is only suitable for the charging of
Bosch batteries (NiCd/NiMH) with a voltage
range of 12 V and 24 V.
h) Keep the battery charger clean. Contami-
nation may result in danger of electric shock.
i) Check the electrical device, cable and
plug each time before using. Do not use
the electrical device when defects are de-
tected. Do not open the electrical device
yourself and have it repaired only by qual-
ified personnel using original spare parts.
Damaged electrical devices, cables and
plugs increase the risk of electric shock.
3) Service
a) Have repairs performed only by a qualified
technician and only using original spare
parts. This ensures that the safety of the
electrical device is maintained.
WARNING
1 609 929 J80.book Seite 1 Montag, 27. März 2006 3:27 15
Page: 16
English–2
1 609 929 J80 • 06.03
Functional Description
Read all instructions. Failure to fol-
low all instructions listed below may
result in electric shock, fire and/or
serious injury.
Functional Elements
The numbering of the device elements refers to the
representation of the electrical device on the
graphic page.
1 Carrying handle
2 Integrated outlet cover(s)
3 Speaker
4 Display
5 Control panel
6 POWER switch
7 “Bass/Treble” tone button
8 Button for equalizer settings
9 Enhanced BOSCH SOUND button
10 CD drive assembly (GML 24 V-CD)
11 CD OPEN/CLOSE button (GML 24 V-CD)
12 Button for CD functions STOP/START-
PAUSE (GML 24 V-CD)
13 Button for CD function TRACK/radio function
PRESET (GML 24 V-CD)
14 Control knob for TUNE/SEEK/SEARCH and
CD functions REV and FAST FORWARD
(GML 24 V-CD)
15 STEREO button for mono/stereo playback
16 CD MODE button REPEAT/RANDOM
(GML 24 V-CD)
17 MEMORY button for radio stations/CD func-
tion program memo (GML 24 V-CD)
18 TIME SET button
19 HOUR button for changing of hour indication
20 MINUTE button for changing of minute indica-
tion
21 VOLUME control knob
22 Operating mode button CD/AUX/Radio
FM/Radio AM (GML 24 V-CD)
23 Operating mode button
AUX/Radio FM/Radio AM (GML 24 V)
24 Control knob for TUNE/SEEK function
(GML 24 V)
25 PRESET forwards button (GML 24 V)
26 PRESET back button (GML 24 V)
27 Enhanced “BOSCH SOUND” indicator
28 Equalizer setting indicator
29 Time indication
30 STEREO reception indicator
31 Display for radio frequency/volume and run-
ning time of the CD track (GML 24 V-CD)
32 Indicator for “RANDOM” play mode of CD
(GML 24 V-CD)
33 Indicator for “REPEAT” play mode of CD
(GML 24 V-CD)
34 Battery warning indicator
35 Indicator “CHARGING”
36 “Battery inserted” indicator
37 FM frequency band indicator
38 AM frequency band indicator
39 Indication of CD source selection
(GML 24 V-CD)
40 Indication of AUX source selection
41 Indicator for radio/CD track number preset
(GML 24 V-CD)
42 PRESET function indicator
43 Power outlets
44 Connection socket for external audio
source (AUX)
45 Fuse for 12 V connection
46 Connection socket for 12 V plug
47 Locking lever for battery compartment lid
48 Battery compartment lid
49 Charging compartment
50 Battery *
51 Battery compartment for AAA batteries
52 Rod aerial
53 Remote control
54 Increase volume button
55 Button for Start/Pause (GML 24 V-CD)/
Button for PRESET (GML 24 V)
56 Button for FAST FORWARD
57 Button for REVERSE
58 Reduce volume button
59 ON/OFF button
60 Operating mode button
61 MUTE button
62 Clip
* Illustrated or described accessories are not included
as standard delivery.
1 609 929 J80.book Seite 2 Montag, 27. März 2006 3:27 15
Page: 17
English–3
1 609 929 J80 • 06.03
Technical Data
This radio charger produces class 1 laser radiation
according to EN 60825. When using the radio
charger as intended for, hazards from laser radia-
tion are not to be expected.
Operation
Starting Procedure
Observe correct mains voltage! The voltage of
the power source must agree with the data speci-
fied on the type plate of the radio charger. Radio
chargers marked with 230 V can also be connected
to 220 V.
The radio charger can also be operated without a
mains connection off a battery inserted in the
charging compartment 49. See section “Charging a
Battery”.
To start the radio charger, push the power butto 6.
When switching on the radio charger, the display 4
and the last set operating mode (FM/AM/AUX/CD)
are activated.
Radio charger GML 24 V
PROFESSIONAL
GML 24 V-CD
PROFESSIONAL
Article number 3 601 D29 4.. 3 601 D29 5..
Operating voltage, radio/CD V 12–24 12–24
Tuner
FM frequency band MHz 87.9–107.90 87.9–107.90
AM frequency band kHz 520–1710 520–1710
CD Player
Laser class – 1
Frequency range kHz – 20–20000
Amplifier
Power output (sine) W 10 10
Battery Charger
Allowable batteries NiCd/NiMH NiCd/NiMH
Battery charging voltage (automatic voltage detection) V 12–24 12–24
Charging current, rapid charging A 1.2 1.2
Charging current, trickle charging, approx. mA 60 60
Allowable charging temperature range ˚C 0–60 0–60
Charging time for battery voltage/capacity, approx.
1.2 Ah min 70 70
1.4 Ah min 80 80
1.7 Ah min 100 100
2.0 Ah min 120 120
2.4 Ah min 140 140
2.6 Ah min 150 150
Weight according to EPTA-Procedure 01/2003 kg 8.5 8.5
Please observe the article number on the type plate of your radio charger. The trade names of individual radio chargers
may vary.
The data applies for rated voltages [U] of 230/240 V. For lower voltages and in country-specific versions, these data can
vary.
1 609 929 J80.book Seite 3 Montag, 27. März 2006 3:27 15
Page: 18
English–4
1 609 929 J80 • 06.03
To increase the volume, turn the VOLUME control
knob 21 in clockwise direction. The selected vol-
ume is indicated for several seconds in the indica-
tor 31 (VOL 00 – 20).
To reduce the volume, turn the VOLUME control
knob 21 in anticlockwise direction.
To switch off the radio charger, press the power
button 6 again.
Setting the Clock
When plugging the mains plug into the outlet or
inserting a battery into the charge port, the radio
charger switches to the standby mode. The indi-
cated time on the display is “12:00”. To adjust the
correct time, proceed as follows.
■ Press the TIME SET button 18. The time indica-
tion 29 flashes.
■ Press the HOUR button 19 as often as required
until the correct hour is indicated. You can also
press and hold the button until the correct hour
is indicated.
■ Press the MINUTE button 20 as often or as long
until the correct minute is indicated.
■ Press the TIME SET button 18 again. A “beep”
confirms the new setting.
■ Even when the device is switched off, the set
clock will continue to run, powered by the AAA
batteries.
Programming the Automatic Switch-off Func-
tion
The radio charger can be set to switch off automat-
ically after a preset period.
■ Press the TIME SET button 18 for three sec-
onds until the “_:_” symbol 29 time indication
flashes in the time indication.
■ Press the HOUR button for changing of hour in-
dication 19 to select one of the pre-adjusted
switch-off periods in steps of 30 minutes
(“_2:00”, “_1:30”, “_1:00”, “_:30”, “OFF”).
■ Press the TIME SET button 18 again at the de-
sired switch-off period. A “beep” confirms the
desired setting.
■ To indicate the remaining time until the radio
charger switches off, press the MINUTE button
for changing of minute indication 20.
If the radio charger is switched off via the POWER
switch 6 before the switch-off period has elapsed,
the automatic switch-off setting is deleted.
Radio Operation
GML 24 V: Press the AUX/Radio FM/Radio AM
operating mode button 23 until FM 37 and AM 38
are indicated in the display.
GML 24 V-CD: Press the CD/AUX/Radio
FM/Radio AM operating mode button 22 until
FM 37 and AM 38 are indicated in the display.
Connecting the Aerial
The radio charger is supplied with the mounted rod
aerial 52. Pivot the rod aerial in the direction with
the best reception.
Setting the Radio Station
Before setting a radio station, reduce the volume to
as low as possible.
■ Briefly turn the TUNE control knob 14 (GML 24
V-CD) or 24 (GML 24 V) in clockwise direction to
increase the frequency in steps of 0.05 MHz (FM
frequency band) or 10 kHz (AM frequency
band). The selected frequency is indicated in the
display 31.
■ Briefly turn the TUNE control knob 14 (GML 24
V-CD) or 24 (GML 24 V) in counterclockwise di-
rection to decrease the frequency in steps of
0.05 MHz (FM frequency band) or 10 kHz (AM
frequency band). The selected frequency is indi-
cated in the display 31.
■ Turn the TUNE control knob 14 (GML 24 V-CD)
or 24 (GML 24 V) and hold it in this position to
start the SEEK function. The tuner automatically
searches for the next radio station with good re-
ception.
When operating within the direct vicinity of radio
plants and radio equipment, radio reception can be
impaired.
Presetting Radio Stations
20 FM and 10 AM tuner presets are possible.
Before setting a radio station, reduce the volume to
as low as possible.
■ Select the desired FM or AM frequency band.
■ Select the radio station with the TUNE control
knob 14 (GML 24 V-CD) or 24 (GML 24 V).
■ Press the radio station MEMORY button 17. The
PRESET function indicator 42 and the indicator
for radio station preset 41 flash in the display.
Press the PRESET forwards 25 or back but-
ton 26 (GML 24 V) or the radio function PRE-
SET button 13 (GML 24 V-CD) to select the de-
sired preset number.
■ Press the radio station MEMORY button 17. A
“beep” confirms the adjustment.
1 609 929 J80.book Seite 4 Montag, 27. März 2006 3:27 15
Page: 19
English–5
1 609 929 J80 • 06.03
Selecting Preset Radio Stations
Before setting a radio station, reduce the volume to
as low as possible.
■ Select the desired FM or AM frequency band.
■ Press the PRESET forwards 25 or back but-
ton 26 (GML 24 V) or the radio function PRE-
SET button 13 (GML 24 V-CD) to select the de-
sired preset number.
CD Player Operation (GML 24 V-CD)
Press the CD/AUX/Radio FM/Radio AM operating
mode button 22 until CD 39 is indicated in the dis-
play.
Inserting and Playing a CD
■ Press the CD OPEN/CLOSE button 11 to open
the CD drive assembly 10.
■ Place the CD centrally on the CD drive assem-
bly, with the inscription facing upward.
■ Press the CD OPEN/CLOSE button 11 to close
the CD drive assembly 10.
■ Press the TRACK button 13 right or left to select
the desired track, which is displayed in the CD
track number indicator 41.
■ Press the START/PAUSE button 12 to the right;
playback of the track begins.
■ By turning the REV and FAST FORWARD con-
trol knob 14, you can move to a certain location
within a track.
■ Press the START/PAUSE button 12 to the right;
playback is stopped. Pressing the button again
initiates playback from where it was stopped.
■ Press the STOP button 12 to the left to end the
playback.
Programming the Playback
You can play back the tracks of a CD in any
sequence by programming them in the desired
order. The program can include up to 20 tracks.
■ Insert the CD, but do not start the playback.
■ Press the CD function program memo but-
ton 17.
■ Select the desired track with the TRACK but-
ton 13 which appears in the indicator for the CD
track number 41. Press the MEMORY button 17
for the CD function program memo, to take over
the track in the program.
■ Press the START button 12 to the right; play-
back begins.
Repeated CD Playback
You can play all tracks on a CD repeatedly. After
the last track has run off, the playback begins with
the first track.
■ Insert the CD, but do not start the playback.
■ Press the CD MODE button 16 (REPEAT) until
the REPEAT indicator 33 appears in the dis-
play 4.
■ Press the START button 12 to the right; play-
back begins.
Repeated Playback of a CD Track
You can repeatedly play a track on a CD. After the
track has run off, the playback begins again.
■ Insert the CD and start the playback of the de-
sired track.
■ Press the CD MODE button 16 until the RE-
PEAT indicator 33 flashes in the display 4.
■ Press the START button 12 to the right; play-
back begins.
Random CD Playback
You can mix all tracks and play them randomly.
When this function is performed again, the play-
back can be completely different.
■ Insert the CD, but do not start the playback.
■ Press the CD MODE button 16 until the RAN-
DOM indicator 32 appears in the display 4.
(RANDOM)
■ Press the START button 12 to the right; play-
back begins. The tracks are played in random
sequence.
■ To continue the playback even after playing the
last track, press the CD MODE button 16 until
the RANDOM indicator 32 and the REPEAT in-
dicator 33 appear in the display 4.
■ Press the START button 12 to the right; play-
back begins.
1 609 929 J80.book Seite 5 Montag, 27. März 2006 3:27 15
Page: 20
English–6
1 609 929 J80 • 06.03
Operation with External Audio Source
You can connect an external audio source, e. g.,
an external CD player or an MP3 player with line
output, to the radio charger.
GML 24 V: Press the AUX/Radio FM/Radio AM
operating mode button 23 until AUX 40 is indicated
in the display.
GML 24 V-CD: Press the CD/AUX/Radio
FM/Radio AM operating mode button 22 until
AUX 40 is indicated in the display.
■ Remove the protective cap from the AUX con-
nection socket 44 on the left side of the radio
charger.
■ Insert the plug of the external audio source into
the AUX connection socket 44.
■ Connect the other end of the cable with the ex-
ternal audio source.
■ Set the volume of the external audio source to
approx. 50 % and start the playback.
■ Set the desired volume with the volume control
knob 21.
Audio Settings
Stereo/Mono
With a sufficiently strong signal and reception of a
correspondingly transmitted radio programme, the
tuner automatically switches to stereo reception.
The STEREO reception indicator 30 appears in the
display 4. To switch between playback in mono
and stereo, press the STEREO button 15.
Tone Control
For optimal sound playback, an equalizer is inte-
grated in the radio charger.
a) Manual Adjustment
The bass and treble settings of the radio charger
can be controlled individually.
To raise or lower the basses, press the “Bass/Tre-
ble” tone button 7 until “BASS” is indicated in the
display 4. To raise the basses, turn the VOLUME
control knob 21 in clockwise direction. The
selected setting is indicated several seconds in the
display 31 (BASS 00 – 10). To lower the basses,
turn the VOLUME control knob 21 in anticlockwise
direction.
To raise or lower the treble, press the “Bass/Treble”
tone button 7 until “TREBLE” is indicated in the dis-
play 4. To raise the treble, turn the VOLUME con-
trol knob 21 in clockwise direction. The selected
setting is indicated several seconds in the dis-
play 31 (TREBLE 00 – 10). To lower the treble, turn
the VOLUME control knob 21 in anticlockwise
direction.
b) Equalizer
5 equalizer setting are available, which offer preset
treble and bass settings for the respective music
styles.
To change between the individual settings, press
the equalizer settings button (EQ) 8. The selected
preset is indicated in the equalizer setting indica-
tor 28 in the display 4: NORMAL (no indication) –
JAZZ – ROCK – POP – CLASSICAL.
Enhanced Bosch Sound
For playback of excellent and powerful sound, the
radio charger is equipped with a digital sound proc-
essor.
Press the enhanced “BOSCH SOUND” button 9 to
switch the sound effect on or off.
1 609 929 J80.book Seite 6 Montag, 27. März 2006 3:27 15
Page: 21
English–7
1 609 929 J80 • 06.03
Remote control (see figure H)
The remote control 53 operates within a radius of
2 x 55° from the centre axis of the radio charger
and within a range of up to 7 metres.
The remote control 53 can be stowed in the carry-
ing handle 1.
As an example, the remote control 53 can be fas-
tened to a belt loop. Unlatch the clip 62 and hook
on the remote control 53.
Replacing the Remote Control Batteries
■ Unscrew the battery compartment screw on the
rear side of the remote control and remove the
lid.
■ Replace the battery (type CR2032) and fasten
the lid with the screw again.
Charging a Battery
Inserting a Battery (see figures F und G)
■ Open the battery compartment lid 48 by unlatch-
ing the locking lever 47.
■ Insert the battery 50 into the charging compart-
ment 49 as indicated in the figure.
Button Function
GML 24 V GML 24 V-CD
Radio operation Radio operation CD operation
Increase volume 54 Increases the volume in
steps
Increases the volume in
steps
Increases the volume in
steps
Start/Pause 55 – – Starting or stopping
CD playback
PRESET 55 Advances forward to the
next memorised station
– –
FAST FORWARD
(press briefly)
56 Increases the station fre-
quency in steps
Advances forward to the
next memorised station
Advances to the next
CD track
FAST FORWARD
(keep pressed)
56 SEEK station, forwards SEEK station, forwards FAST FORWARD,
CD track can be heard
distorted
REVERSE
(press briefly)
57 Reduces the station fre-
quency in steps
Advances back to the
next memorised station
Advances back to the
next CD track
REVERSE
(keep pressed)
57 SEEK station, back-
wards
SEEK station, back-
wards
FAST REVERSE,
CD track can be heard
distorted
Reduce volume 58 Reduces the volume in
steps
Reduces the volume in
steps
Reduces the volume in
steps
POWER 59 Switches the radio
charger on and off
Switches the radio
charger on and off
Switches the radio
charger on and off
Operating mode 60 Selects operating mode:
AUX/Radio FM/
Radio AM
Selects operating mode:
CD/AUX/Radio FM/
Radio AM
Selects operating mode:
CD/AUX/Radio FM/
Radio AM
MUTE 61 Mutes the tone Mutes the tone Mutes the tone
1 609 929 J80.book Seite 7 Montag, 27. März 2006 3:27 15
Page: 22
English–8
1 609 929 J80 • 06.03
Charging Procedure
The charging procedure starts as soon as the
mains plug is plugged into the socket and the bat-
tery is inserted into the charging compartment 49.
Due to the intelligent charging method, the charg-
ing condition of the battery is automatically
detected and the battery is charged with the opti-
mum charging current, depending on battery tem-
perature and voltage. This gives longer life to the
battery and always leaves it fully charged when
kept in the radio charger for storage.
The charging procedure is indicated through the
indicators in the display 4. During the rapid-charg-
ing procedure, the “CHARGING” indicator 35 and
the “Battery inserted” indicator 36 appear. The
charging procedure is ended when the “CHARG-
ING” indicator 35 goes out. The charger switches
to the trickle charging mode, which equalizes the
natural running-down of the battery. (CHARGING)
If the battery warning indicator 34 appears when a
battery is inserted, then the battery temperature is
not within the allowable temperature range (0 °C –
60 °C) and will not be charged. Bring the battery
temperature within the allowable temperature
range by cooling down or warming up. As soon as
the battery temperature is within the allowable tem-
perature range again, the battery charger automat-
ically switches to rapid charging.
The charged battery can be removed from the
charging compartment 49 or used as a mobile
power source for the radio charger instead of a
mains supply, when left in the charging compart-
ment.
Check the temperature of the battery
before removing it. The battery can warm
up considerably during charging.
Practical Advice
A new battery or one that has not been used for an
extended period of time requires five charging/dis-
charging cycles to gain its full capacity. Leave the
battery in the charging compartment until it has
warmed up.
A significantly reduced working period after charg-
ing indicates that the battery is used up and must
be replaced.
12 V Connection (see figure E)
You can connect an external electrical device/unit
with a 12 V plug and a maximum current consump-
tion of 1 A. When operating the radio charger with
the inserted battery, the connection socket is
switched off.
■ Remove the protective cap of the 12 V connec-
tion socket 46 on the left side of the radio
charger.
■ Insert the plug of the external device into the
socket of the 12 V connection 46.
■ If a 12 V voltage is not present, check the
fuse 45. For this, unscrew the fuse cap. Insert a
5 x 20 mm fuse with a 1 A rating, if required. Af-
terwards, firmly screw on the fuse cap.
Only use the specified 1 A fuse. Use of other
fuses can cause damage to the radio charger.
Integrated Power Outlets
Two protective contact power outlets 43 are inte-
grated in the radio charger for the supply of power
to external power tools. The maximal allowable
current consumption of the connected power tools
may not exceed the value listed in the following
table. The power outlets can vary depending on
country-specific standards. The power outlets are
deactivated when operating the radio charger via
the inserted battery.
Replacing the AAA Batteries
■ Open the battery compartment lid 48 by unlatch-
ing the locking lever 47.
■ Slide the plastic lever to the side and remove the
lid of the battery compartment 51.
■ Replace the AAA batteries and reattach the lid
of the battery compartment 51 again.
Article number
3 601 D29 …
max. current consumption
of the connected power
tools
…401, …403,
…421, …422,
…501, …503,
…521, …522
A 15
…471, …571 A 12
…402, …431,
…502, …531
A 9
1 609 929 J80.book Seite 8 Montag, 27. März 2006 3:27 15
Page: 23
English–9
1 609 929 J80 • 06.03
Fault Finding and Troubleshooting
Maintenance and Service
Maintenance and Cleaning
Before any work on the radio charger, pull the
mains plug from the power outlet.
If the radio charger should fail despite the care
taken in manufacturing and testing procedures,
repair should be carried out by an after-sales serv-
ice centre for Bosch power tools
In all correspondence and spare parts orders,
please always include the 10-digit article number
on the type plate of the radio charger. The type
plate is located on the bottom side of the radio
charger.
Mains Cable
The mains cable is fitted with a special safety con-
nection. The mains cable may only be replaced by
an authorised after-sales service agent for Bosch
power tools.
WARNING! This appliance must be earthed.
Important instructions for connecting a new
3-pin plug.
The wires in the cable are coloured according to
the following code:
Do not connect the blue or brown wire to the earth
terminal of the plug.
Important: If for any reason the moulded plug is
removed from the cable of this machine, it must be
disposed of safely.
Problem Possible Cause Corrective Measure
Radio or CD player
not operative.
Mains plug not plugged in. Plug in the mains plug.
For battery operation: Battery not fully
inserted.
Completely insert the battery.
For battery operation: Battery dis-
charged.
Charge the battery by plugging in
the mains plug.
Insufficient radio
reception.
Bad location. Place the radio charger at a different
location.
Aerial not aligned optimally. Turn the aerial to other directions.
12 V connection not
operative.
Fuse for 12 V connection not inserted. Insert a 5 x 20 mm 1 A fuse.
Fuse for 12 V connection defective. Replace the fuse.
Power outlets 43 not
operative.
Mains plug not plugged in. Plug in the mains plug.
Radio charger does not
operate.
Mains plug not plugged in. Plug in the mains plug.
Software error. If the display is not lit up when switched
on, the software in the radio charger
must be reset. Pull the mains plug
and/or remove the battery and wait for
30 seconds.
Faulty clock display. Clock batteries dead. Replace the AAA batteries and reset
the clock.
strain relief
live = brown To be fitted
by a qualified
professional only
neutral = blue
earth = green/yellow
1 609 929 J80.book Seite 9 Montag, 27. März 2006 3:27 15
Page: 24
English–10
1 609 929 J80 • 06.03
Service and Customer Assistance
Exploded views and information on spare parts
can be found under:
www.bosch-pt.com
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
Middlesex UB 9 5HJ
✆ Service ............................. +44 (0) 18 95 / 83 87 82
✆ Advice line...................... +44 (0) 18 95 / 83 87 91
Fax ............................................. +44 (0) 18 95 / 83 87 89
Ireland
Beaver Distribution Ltd.
Greenhills Road
Tallaght-Dublin 24
✆ Service .................................... +353 (0)1 / 414 9400
Fax .................................................... +353 (0)1 / 459 8030
Australia and New Zealand
Robert Bosch Australia Pty. Ltd.
RBAU/SPT
1555 Centre Road
P.O. Box 66
3168 Clayton/Victoria
✆ ............................................. +61 (0)1 / 3 00 30 70 44
Fax ............................................. +61 (0)1 / 3 00 30 70 45
www.bosch.com.au
Disposal
Power tools, accessories and packaging should be
sorted for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into
household waste!
According to the European Directive
2002/96/EC on waste electrical and
electronic equipment and its incor-
poration into national law, power
tools that are no longer suitable for use must be
separately collected and sent for recovery in an
environmental-friendly manner.
Subject to change without notice.
1 609 929 J80.book Seite 10 Montag, 27. März 2006 3:27 15

Question & answers

There are no questions about the Bosch GML 24 V-CD yet.

Ask a question about the Bosch GML 24 V-CD

Have a question about the Bosch GML 24 V-CD but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Bosch GML 24 V-CD. Please make sure that you describe your difficulty with the Bosch GML 24 V-CD as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.