Bosch GLL 3-80 P + BM1 manual

View a manual of the Bosch GLL 3-80 P + BM1 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Bosch
  • Product: Range finder
  • Model/name: GLL 3-80 P + BM1
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian, Portuguese, Danish, Polish, Russian, Norwegian, Finnish, Czech, Romanian, Turkish, Slovak, Hungarian, Slovene, Croatian, Indonesian, Ukrainian

Table of Contents

Page: 2
3 |
1 609 929 S05 | (22.9.09) Bosch Power Tools
GLL 3-80 P
Professional
GLL 3-80 P
Professional
1
1
2
3
4
5
6
7
14
13
1
1
1
1
9
10
11
12
8
GLL 3-80 P
Professional
OBJ_BUCH-1046-001.book Page 3 Tuesday, September 22, 2009 6:20 PM
Page: 3
1 609 929 S05 | (22.9.09) Bosch Power Tools
4 |
F
E
D
C
B
A
OBJ_BUCH-1046-001.book Page 4 Tuesday, September 22, 2009 6:20 PM
Page: 4
5 |
1 609 929 S05 | (22.9.09) Bosch Power Tools
Pro
fess
iona
l
20
16
2 607 002 195
2 607 990 031
BT 350
0 601 015 B00
17
19
LR 2
0 601 069 100
21
18
1 608 M00 80K
15
8
8
BM 1
0 601 015 A00
BS 150
0 601 096 974
22
H
G
OBJ_BUCH-1046-001.book Page 5 Tuesday, September 22, 2009 6:20 PM
Page: 14
English | 15
Bosch Power Tools 1 609 929 S05 | (22.9.09)
en
Safety Notes
Working safely with the measuring
tool is possible only when the
operating and safety information
are read completely and the in-
structions contained therein are
strictly followed. Never make warning labels
on the measuring tool unrecognisable.
SAVE THESE INSTRUCTIONS.
f Caution – The use of other operating or
adjusting equipment or the application of
other processing methods than those men-
tioned here, can lead to dangerous radia-
tion exposure.
f The measuring tool is provided with a warn-
ing label in English (marked with number 13
in the representation of the measuring tool
on the graphics page).
f Do not direct the laser beam at persons
or animals and do not stare into the laser
beam yourself. This measuring tool produces
laser class 2 laser radiation according to
IEC 60825-1. This can lead to persons being
blinded.
f Do not use the laser viewing glasses as safety
goggles. The laser viewing glasses are used for
improved visualisation of the laser beam, but
they do not protect against laser radiation.
f Do not use the laser viewing glasses as sun
glasses or in traffic. The laser viewing glass-
es do not afford complete UV protection and
reduce colour perception.
f Have the measuring tool repaired only
through qualified specialists using original
spare parts. This ensures that the safety of
the measuring tool is maintained.
f Do not allow children to use the laser meas-
uring tool without supervision. They could
unintentionally blind other persons or them-
selves.
f Do not operate the measuring tool in explo-
sive environments, such as in the presence
of flammable liquids, gases or dusts. Sparks
can be created in the measuring tool which
may ignite the dust or fumes.
Keep the measuring tool and the
laser target plate 15 away from
cardiac pacemakers. The magnets
of the measuring tool and laser tar-
get plate generate a field that can
impair the function of cardiac
pacemakers.
f Keep the measuring tool and the laser tar-
get plate 15 away from magnetic data medi-
um and magnetically-sensitive equipment.
The effect of the magnets of the measuring
tool and laser target plate can lead to irre-
versible data loss.
Functional Description
Please unfold the fold-out page with the repre-
sentation of the measuring tool and leave it un-
folded while reading the operating instructions.
Intended Use
The measuring tool is intended for determining
and checking horizontal and vertical lines.
OBJ_BUCH-1046-001.book Page 15 Tuesday, September 22, 2009 6:20 PM
Page: 15
16 | English
1 609 929 S05 | (22.9.09) Bosch Power Tools
Technical Data
Line laser GLL 3-80 P
Professional
Article number 3 601 K63 300
Working range1)
– Standard
– With pulse function
– With laser receiver
20 m
15 m
5–80 m
Levelling Accuracy ±0.2 mm/m
Self-levelling range, typically ±4°
Levelling duration, typically <4 s
Operating temperature –10 °C ... +40 °C
Storage temperature –20 °C ... +70 °C
Relative air humidity, max. 90 %
Laser class 2
Laser type 640 nm, <1 mW
C6 1
Shortest pulse duration 1/1600 s
Tripod mount 1/4", 5/8"
Batteries 4 x 1.5 V LR06 (AA)
Operating duration
– With 3 laser planes
– With 2 laser planes
– With 1 laser plane
5 h
9 h
18 h
Weight according to EPTA-Procedure 01/2003 0.75 kg
Dimensions 159 x 141 x 75 mm
Degree of protection IP 54 (dust and splash water protected)
1) The working range can be decreased by unfavourable environmental conditions (e.g. direct sun irradiation).
Please observe the article number on the type plate of your measuring tool. The trade names of the individual meas-
uring tools may vary.
The measuring tool can be clearly identified with the serial number 14 on the type plate.
OBJ_BUCH-1046-001.book Page 16 Tuesday, September 22, 2009 6:20 PM
Page: 16
English | 17
Bosch Power Tools 1 609 929 S05 | (22.9.09)
Product Features
The numbering of the product features shown
refers to the illustration of the measuring tool
on the graphic page.
1 Exit opening for laser beam
2 Battery low indicator
3 Pulse-function button
4 Operating mode button
5 Pulse-function indicator
6 Working without automatic levelling
indicator
7 On/Off switch
8 Magnets
9 Tripod mount 5/8"
10 Tripod mount 1/4"
11 Latch of battery lid
12 Battery lid
13 Laser warning label
14 Serial number
15 Laser target plate
16 Measurement plate with stand*
17 Laser receiver*
18 Protective pouch*
19 Universal holder*
20 Laser viewing glasses*
21 Tripod*
22 Measuring rod*
* The accessories illustrated or described are not
included as standard delivery.
Assembly
Inserting/Replacing the Battery
Alkali-manganese batteries are recommended
for the measuring tool.
To open the battery lid 12, slide the latch 11 in
the direction of the arrow and fold the battery
lid up. Insert the batteries. When inserting, pay
attention to the correct polarity according to the
representation on the inside of the battery lid.
When the batteries become weak, a single 5 s
audio signal will sound. The battery low indica-
tor 2 continuously flashes red. The measuring
tool can be operated for less then 2 h.
If the batteries are weak when switching on the
measuring tool, the 5 s audio signal will sound
directly after switching on the measuring tool.
Always replace all batteries at the same time.
Only use batteries from one brand and with the
identical capacity.
f Remove the batteries from the measuring
tool when not using it for extended periods.
When storing for extended periods, the bat-
teries can corrode and discharge themselves.
Operation
Initial Operation
f Loud audio signals will sound under certain
conditions while operating the measuring
tool. Therefore, keep the measuring tool
away from your ear or other persons. The
loud audio signal can cause hearing damage.
f Protect the measuring tool against mois-
ture and direct sun light.
f Do not subject the measuring tool to ex-
treme temperatures or variations in tem-
perature. As an example, do not leave it in
vehicles for longer periods. In case of large
variations in temperature, allow the measur-
ing tool to adjust to the ambient temperature
before putting it into operation. In case of ex-
treme temperatures or variations in tempera-
ture, the accuracy of the measuring tool can
be impaired.
f Avoid heavy impact or falling of the measur-
ing tool. After heavy exterior impact on the
measuring tool, an accuracy check should
always be carried out before continuing to
work (see “Levelling Accuracy”).
f Switch the measuring tool off during trans-
port. When switching off, the levelling unit,
which can be damaged in case of intense
movement, is locked.
OBJ_BUCH-1046-001.book Page 17 Tuesday, September 22, 2009 6:20 PM
Page: 17
18 | English
1 609 929 S05 | (22.9.09) Bosch Power Tools
Switching On and Off
To switch on the measuring tool, slide the
On/Off switch 7 to the “ on” position (when
working without automatic levelling) or to the
“ on” position (when working with automatic
levelling). Immediately after switching on, the
measuring tool sends laser beams out of the exit
openings 1.
f Do not point the laser beam at persons or
animals and do not look into the laser beam
yourself, not even from a large distance.
To switch off the measuring tool, slide the
On/Off switch 7 to the “off” position. When
switching off, the levelling unit is locked.
When exceeding the maximum permitted oper-
ating temperature of 45 °C, the measuring tool
switches off to protect the laser diode. After
cooling down, the measuring tool is ready for
operation and can be switched on again.
Deactivating the Automatic Shut-off
When no button on the measuring tool is pressed
for approx. 30 minutes, the measuring tool auto-
matically switches off to save the batteries.
To switch on the measuring tool after automatic
shut-off, either slide the On/Off switch 7 to the
“off” position and then switch the measuring
tool on again or press the operating mode but-
ton 4 once or press the pulse-function button 3
once.
To deactivate the automatic shut-off, keep the
operating mode button 4 pressed for at least 3 s
(while the measuring tool is switched on). Deac-
tivation of the automatic shut-off is confirmed
by brief flashing of the laser beams.
f Do not leave the switched on measuring
tool unattended and switch the measuring
tool off after use. Other persons could be
blinded by the laser beam.
To activate the automatic shut-off, switch the
measuring tool off and then on again or press
and hold the operating mode button 4 for at
least 3 s.
Deactivating the Signal Tone
After the measuring tool has been switched on,
the audio signal is always activated.
To deactivate/activate the audio signal, press
and hold the operating mode button 4 and the
pulse-function button 3 at the same time for at
least 3 s.
The audio signal activation and deactivation are
both confirmed by three short beeps.
Operating Modes
The measuring tool has several operating modes
between which you can switch at any time.
These are for:
– Generating a horizontal laser plane,
– Generating a vertical laser plane,
– Generating two vertical laser planes,
– Generating a horizontal laser plane as well as
two vertical laser planes.
After switching on, the measuring tool generates
a horizontal laser plane. To change the operating
mode, press the operating mode button 4.
All operating modes can be selected both with
and without automatic levelling.
Pulse Function
When working with the laser receiver 17, the
pulse function must be activated, – independ-
ent of the selected operating mode.
In pulse function, the laser lines flash at very
high frequency and thus become detectable by
the laser receiver 17.
To switch on the pulse function, press button 3.
When the pulse function is switched on, the
pulse-function indicator 5 lights up green.
When the pulse function is switched on, the vis-
ibility of the laser lines is reduced for the human
eye. Therefore, shut off the pulse function by
pushing button 3 again when working without
laser receiver. When the pulse function is
switched off, the pulse-function indicator 5 is
deactivated.
OBJ_BUCH-1046-001.book Page 18 Tuesday, September 22, 2009 6:20 PM
Page: 18
English | 19
Bosch Power Tools 1 609 929 S05 | (22.9.09)
Automatic Levelling
Working with Automatic Levelling
Position the measuring tool on a level and firm
support, attach it to the holder 19 or to the tri-
pod 21.
When working with automatic levelling, push
the On/Off switch 7 to the “ on” position.
After switching on, the levelling function auto-
matically compensates irregularities within the
self-levelling range of ±4°. The levelling is fin-
ished as soon as the laser beams do not move
any more.
If automatic levelling is not possible, e.g. be-
cause the surface on which the measuring tool
stands deviates by more than 4° from the hori-
zontal plane, the laser lines begin to flash rapidly.
When the audio signal is activated, a fast-beat
signal sounds for 30 s (maximum). This alarm is
deactivated within 10 s after switching on, in
order to allow adjustment of the measuring tool.
Set up the measuring tool in level position and
wait for the self-levelling to take place. As soon
as the measuring tool is within the self-levelling
range of ±4°, all laser beams light up continu-
ously and the audio signal is switched off.
In case of ground vibrations or position changes
during operation, the measuring tool is automat-
ically levelled in again. To avoid errors, check
the position of the horizontal and vertical laser
line with regard to the reference points upon
re-levelling.
Working without Automatic Levelling
For working without automatic levelling, slide
the On/Off switch 7 to the “ on” position.
When automatic levelling is switched off, indi-
cator 6 lights up red and for the first 30 s laser
beams flash slowly.
When automatic levelling is switched off, you
can hold the measuring tool freely in your hand
or place it on an inclinded surface. The laser
lines no longer necessarily run vertical to each
other.
Levelling Accuracy
Influences on Accuracy
The ambient temperature has the greatest influ-
ence. Especially temperature differences occur-
ring from the ground upward can divert the laser
beam.
Because the largest difference in temperature
layers is close to the ground, the measuring tool
should always be mounted on a tripod when
measuring distances exceeding 20 m. If possi-
ble, also set up the measuring tool in the centre
of the work area.
Apart from exterior influences, device-specific
influences (such as heavy impact or falling
down) can lead to deviations. Therefore, check
the accuracy of the measuring tool each time
before starting your work.
Firstly, check the levelling accuracy of the hori-
zontal laser line and then the levelling accuracy
of the vertical laser lines.
Should the measuring tool exceed the maximum
deviation during one of the tests, please have it
repaired by a Bosch after-sales service.
OBJ_BUCH-1046-001.book Page 19 Tuesday, September 22, 2009 6:20 PM
Page: 19
20 | English
1 609 929 S05 | (22.9.09) Bosch Power Tools
Checking the Horizontal Levelling Accuracy of
the Lateral Axis
For this check, a free measuring distance of
5 metres on a firm surface between two walls A
and B is required.
– Mount the measuring tool onto a tripod, or
place it on a firm and level surface close to
wall A. Switch on the measuring tool to oper-
ation with automatic levelling. Select the
operating mode in which a horizontal laser
plane as well as a vertical laser plane in front
of the measuring tool are generated.
– Direct the laser against the close wall A and
allow the measuring tool to level in. Mark the
centre of the point where the laser lines
cross each other at wall A (point I).
– Turn the measuring tool by 180°, allow it to
level in and mark the cross point of the laser
lines on the opposite wall B (point II).
– Without turning the measuring tool, position
it close to wall B. Switch the measuring tool
on and allow it to level in.
– Align the height of the measuring tool (using
a tripod or by underlaying, if required) in
such a manner that the cross point of the la-
ser lines is projected against the previously
marked point II on the wall B.
– Without changing the height, turn around the
measuring tool by 180°. Direct it against the
wall A in such a manner that the vertical laser
line runs through the already marked point I.
Allow the measuring tool to level in and mark
the cross point of the laser lines on the wall A
(point III).
– The difference d of both marked points I and
III on wall A results in the actual height de-
viation of the measuring tool alongside the
lateral axis.
On the measuring distance of 2 x 5 m = 10 m,
the maximum allowable deviation is:
10 m x ±0.2 mm/m = ±2 mm.
Thus, the difference d between points I and III
must not exceed 2 mm (max.).
B
5 m
B
180˚
B
B
d
d
180˚
OBJ_BUCH-1046-001.book Page 20 Tuesday, September 22, 2009 6:20 PM
Page: 20
English | 21
Bosch Power Tools 1 609 929 S05 | (22.9.09)
Checking the Levelling Accuracy of the
Vertical Lines
For this check, a door opening is required with
at least 2.5 metres of space (on a firm surface)
to each side of the door.
– Position the measuring tool on a firm, level
surface (not on a tripod) 2.5 m away from
the door opening. Switch on the measuring
tool to operation with automatic levelling.
Select an operating mode in which a vertical
laser plane is generated in front of the meas-
uring tool.
– Mark the centre of the vertical laser line at
the floor of the door opening (point I), at a
distance of 5 metres beyond the other side of
the door opening (point II) and at the upper
edge of the door opening (point III).
– Rotate the measuring tool by 180° and posi-
tion it on the other side of the door opening
directly behind point II. Allow the measuring
tool to level in and align the vertical laser line
in such a manner that its centre runs exactly
through points I and II.
– Mark the centre of the laser line at the upper
edge of the door opening as point IV.
– The difference d of both marked points III
and IV results in the actual deviation of the
measuring tool to the plumb line.
– Measure the height of the door opening.
Repeat the measuring procedure for the second
vertical laser plane. For this, select an operating
mode in which a vertical laser plane is generated
aside of the measuring tool, and turn the meas-
uring tool by 90° before beginning with the
measuring procedure.
The maximum admissible deviation is calculated
as follows:
Doubled height of the door opening x 0.2 mm/m
Example: For a door-opening height of 2 m, the
maximum deviation may be
2 x 2 m x ±0.2 mm/m = ±0.8 mm. Consequent-
ly, points III and IV may be no more than 0.8 mm
(max.) apart from each other for each of both
measurements.
Working Advice
f Always use the centre of the laser line for
marking. The width of the laser line changes
with the distance.
Working with the Laser Target Plate
The laser target plate 15 increases the visibility
of the laser beam under unfavourable condi-
tions and at large distances.
The reflective part of the laser target plate 15
improves the visibility of the laser line. Thanks
to the transparent part, the laser line is also vis-
ible from the back side of the laser target plate.
Working with the Tripod (Accessory)
A tripod offers a stable, height-adjustable meas-
uring support. Position the measuring tool with
the 1/4" tripod mount 10 onto the thread of the
tripod 21 or a commercially available camera tri-
pod. For fastening to a commercially available
construction tripod, use the 5/8" tripod mount
9. Tighten the measuring tool with the tripod
mounting stud.
2
,
5
m
2
,
5
m
2
m
d
OBJ_BUCH-1046-001.book Page 21 Tuesday, September 22, 2009 6:20 PM
Page: 21
22 | English
1 609 929 S05 | (22.9.09) Bosch Power Tools
Fastening with the Universal Holder
(Accessory) (see figure D)
With the universal holder 19, you can fasten the
measuring tool, e.g., to vertical surfaces, pipes
or magnetizable materials. The universal holder
is also suitable for use as a ground tripod and
makes the height adjustment of the measuring
tool easier.
Working with the Measuring Plate
(Accessory) (see figures A–B)
With the measuring plate 16, it is possible to
project the laser mark onto the floor or the laser
height onto a wall.
With the zero field and the scale, the offset or
drop to the required height can be measured
and projected at another location. This elimi-
nates the necessity of precisely adjusting the
measuring tool to the height to be projected.
The measuring plate 16 has a reflective coating
that enhances the visibility of the laser beam at
greater distances or in intense sunlight. The
brightness intensification can be seen only
when viewing, parallel to the laser beam, onto
the measuring plate.
Working with the Laser Receiver (Accessory)
(see figure D)
Under unfavourable light conditions (bright
environment, direct sunlight) and for larger dis-
tances, use the laser receiver for improved find-
ing of the laser lines 17. When working with the
laser receiver, switch the pulse function on (see
“Pulse Function”, page 18).
Laser Viewing Glasses (Accessory)
The laser viewing glasses filter out the ambient
light. This makes the red light of the laser appear
brighter for the eyes.
f Do not use the laser viewing glasses as
safety goggles. The laser viewing glasses are
used for improved visualisation of the laser
beam, but they do not protect against laser
radiation.
f Do not use the laser viewing glasses as sun
glasses or in traffic. The laser viewing glass-
es do not afford complete UV protection and
reduce colour perception.
Work Examples (see figures C–H)
Applicational examples for the measuring tool
can be found on the graphics pages.
Maintenance and Service
Maintenance and Cleaning
Store and transport the measuring tool only in
the protective pouch or in the case.
Keep the measuring tool clean at all times.
Do not immerse the measuring tool in water or
other fluids.
Wipe off debris using a moist and soft cloth.
Do not use any cleaning agents or solvents.
Regularly clean the surfaces at the exit opening
of the laser in particular, and pay attention to
any fluff of fibres.
If the measuring tool should fail despite the care
taken in manufacturing and testing procedures,
repair should be carried out by an authorised af-
ter-sales service centre for Bosch power tools.
Do not open the measuring tool yourself.
In all correspondence and spare parts orders,
please always include the 10-digit article
number given on the type plate of the measuring
tool.
In case of repairs, send in the measuring tool
packed in its protective pouch 18.
After-sales Service and Customer
Assistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
found under:
www.bosch-pt.com
Our customer service representatives can an-
swer your questions concerning possible appli-
cations and adjustment of products and acces-
sories.
OBJ_BUCH-1046-001.book Page 22 Tuesday, September 22, 2009 6:20 PM
Page: 22
English | 23
Bosch Power Tools 1 609 929 S05 | (22.9.09)
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: +61 (01300) 307 044
Fax: +61 (01300) 307 045
Inside New Zealand:
Phone: +64 (0800) 543 353
Fax: +64 (0800) 428 570
Outside AU and NZ:
Phone: +61 (03) 9541 5555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: +27 (011) 6 51 96 00
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: +27 (011) 4 93 93 75
Fax: +27 (011) 4 93 01 26
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: +27 (031) 7 01 21 20
Fax: +27 (031) 7 01 24 46
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: +27 (021) 5 51 25 77
Fax: +27 (021) 5 51 32 23
E-Mail: bsc@zsd.co.za
Bosch Headquarters
Midrand, Gauteng
Tel.: +27 (011) 6 51 96 00
Fax: +27 (011) 6 51 98 80
E-Mail: rbsa-hq.pts@za.bosch.com
People’s Republic of China
Website: www.bosch-pt.com.cn
China Mainland
Bosch Power Tools (China) Co., Ltd.
567, Bin Kang Road
Bin Jiang District 310052
Hangzhou, P.R.China
Service Hotline: 800 8 20 84 84
Tel.: +86 (571) 87 77 43 38
Fax: +86 (571) 87 77 45 02
HK and Macau Special Administrative Regions
Robert Bosch Hong Kong Co. Ltd.
21st Floor, 625 King’s Road
North Point, Hong Kong
Customer Service Hotline: +852 (21) 02 02 35
Fax: +852 (25) 90 97 62
E-Mail: info@hk.bosch.com
www.bosch-pt.com.cn
Indonesia
PT. Multi Tehaka
Kawasan Industri Pulogadung
Jalan Rawa Gelam III No. 2
Jakarta 13930
Indonesia
Tel.: +62 (21) 4 60 12 28
Fax: +62 (21) 46 82 68 23
E-Mail: sales@multitehaka.co.id
www.multitehaka.co.id
OBJ_BUCH-1046-001.book Page 23 Tuesday, September 22, 2009 6:20 PM
Page: 23
24 | English
1 609 929 S05 | (22.9.09) Bosch Power Tools
Philippines
Robert Bosch, Inc.
Zuellig Building
Sen. Gil Puyat Avenue
Makati City 1200, Metro Manila
Philippines
Tel.: +63 (2) 8 17 32 31
www.bosch.com.ph
Malaysia
Robert Bosch (SEA.) Pte. Ltd.
No. 8a, Jalan 13/6
46200 Petaling Jaya,
Selangor,
Malaysia
Tel.: +6 (03) 7966 3000
Fax: +6 (03) 7958 3838
E-Mail: hengsiang.yu@my.bosch.com
Toll Free Tel.: 1 800 880 188
Fax: +6 (03) 7958 3838
www.bosch.com.sg
Thailand
Robert Bosch Ltd.
Liberty Square Building
No. 287, 11 Floor
Silom Road, Bangrak
Bangkok 10500
Tel.: +66 (2) 6 31 18 79 – 18 88 (10 lines)
Fax: +66 (2) 2 38 47 83
Robert Bosch Ltd., P. O. Box 2054
Bangkok 10501, Thailand
Bosch Service – Training Centre
2869-2869/1 Soi Ban Kluay
Rama IV Road (near old Paknam Railway)
Prakanong District
10110 Bangkok
Thailand
Tel.: +66 (2) 6 71 78 00 – 4
Fax: +66 (2) 2 49 42 96
Fax: +66 (2) 2 49 52 99
Singapore
Robert Bosch (SEA.) Pte. Ltd.
38 C Jalan Pemimpin
Singapore 915701
Republic of Singapore
Tel.: +65 (3) 50 54 94
Fax: +65 (3) 50 53 27
www.bosch.com.sg
Vietnam
Robert Bosch (SEA) Pte. Ltd – Vietnam
Representative Office
Saigon Trade Center, Suite 1206
37 Ton Duc Thang Street,
Ben Nghe Ward, District 1
HCMC
Vietnam
Tel.: +84 (8) 9111 374 – 9111 375
Fax: +84 (8) 9111376
Disposal
Measuring tools, accessories and packaging
should be sorted for environmental-friendly
recycling.
Only for EC countries:
Do not dispose of measuring tools
into household waste!
According the European Guideline
2002/96/EC for Waste Electrical
and Electronic Equipment and its
implementation into national
right, measuring tools that are no longer usable
must be collected separately and disposed of in
an environmentally correct manner.
Battery packs/batteries:
Do not dispose of battery packs/batteries into
household waste, fire or water. Battery packs/
batteries should be collected, recycled or dis-
posed of in an environmental-friendly manner.
Only for EC countries:
Defective or dead out battery packs/batteries
must be recycled according the guideline
91/157/EEC.
Battery packs/batteries no longer suitable for
use can be directly returned at:
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
Subject to change without notice.
OBJ_BUCH-1046-001.book Page 24 Tuesday, September 22, 2009 6:20 PM

Question & answers

There are no questions about the Bosch GLL 3-80 P + BM1 yet.

Ask a question about the Bosch GLL 3-80 P + BM1

Have a question about the Bosch GLL 3-80 P + BM1 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Bosch GLL 3-80 P + BM1. Please make sure that you describe your difficulty with the Bosch GLL 3-80 P + BM1 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.