Bosch GHO 18 V manual

View a manual of the Bosch GHO 18 V below. All manuals on can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Bosch
  • Product: Angle grinder
  • Model/name: GHO 18 V
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian, Swedish, Portuguese, Danish, Norwegian, Finnish, Turkish

Table of Contents

Page: 0
Robert Bosch GmbH
Power Tools Division
70745 Leinfelden-Echterdingen
1 609 929 N13 (2008.01) O / 119
GHO Professional
14,4 V | 18 V
de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Πρωτότυπο οδηγιών χρήσης
tr Orijinal işletme talimat Page 1 Wednesday, January 16, 2008 3:27 PM
Page: 1
1 609 929 N13 | (16.1.08) Bosch Power Tools
2 |
Deutsch . . . . . . . . . . . . . . . . . . . . . . . . . . . . Seite 6
English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 15
Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 23
Español. . . . . . . . . . . . . . . . . . . . . . . . . . . .Página 32
Português. . . . . . . . . . . . . . . . . . . . . . . . . .Página 41
Italiano . . . . . . . . . . . . . . . . . . . . . . . . . . . .Pagina 50
Nederlands . . . . . . . . . . . . . . . . . . . . . . . . .Pagina 60
Dansk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Side 69
Svenska . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sida 77
Norsk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Side 84
Suomi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Sivu 91
Ελληνικά . . . . . . . . . . . . . . . . . . . . . . . . . . . Σελίδα 99
Türkçe . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Sayfa 109 Page 2 Wednesday, January 16, 2008 3:29 PM
Page: 2
3 |
1 609 929 N13 | (16.1.08) Bosch Power Tools
3 5
1 4
GHO 14,4 V
Professional Page 3 Wednesday, January 16, 2008 3:29 PM
Page: 3
1 609 929 N13 | (16.1.08) Bosch Power Tools
4 |
13 14 15
Ø 35mm
7 8 Page 4 Wednesday, January 16, 2008 3:29 PM
Page: 4
5 |
1 609 929 N13 | (16.1.08) Bosch Power Tools
82 mm
8 mm
27 Page 5 Wednesday, January 16, 2008 3:29 PM
Page: 14
English | 15
Bosch Power Tools 1 609 929 N13 | (16.1.08)
General Power Tool Safety
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
The term “power tool” in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Clut-
tered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed
(grounded) power tools. Unmodified
plugs and matching outlets will reduce risk
of electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes, radia-
tors, ranges and refrigerators. There is an
increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool
will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat,
oil, sharp edges and moving parts. Dam-
aged or entangled cords increase the risk
of electric shock.
e) When operating a power tool outdoors,
use an extension cord suitable for out-
door use. Use of a cord suitable for out-
door use reduces the risk of electric shock.
f) If operating a power tool in a damp loca-
tion is unavoidable, use a residual current
device (RCD) protected supply. Use of an
RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment
of inattention while operating power tools
may result in serious personal injury.
b) Use personal protective equipment. Al-
ways wear eye protection. Protective
equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protec-
tion used for appropriate conditions will
reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or bat-
tery pack, picking up or carrying the tool.
Carrying power tools with your finger on
the switch or energising power tools that
have the switch on invites accidents.
d) Remove any adjusting key or wrench be-
fore turning the power tool on. A wrench
or a key left attached to a rotating part of
the power tool may result in personal inju-
e) Do not overreach. Keep proper footing
and balance at all times. This enables bet-
ter control of the power tool in unexpected
f) Dress properly. Do not wear loose cloth-
ing or jewellery. Keep your hair, clothing
and gloves away from moving parts.
Loose clothes, jewellery or long hair can be
caught in moving parts.
WARNING Page 15 Wednesday, January 16, 2008 3:29 PM
Page: 15
1 609 929 N13 | (16.1.08) Bosch Power Tools
16 | English
g) If devices are provided for the connection
of dust extraction and collection facili-
ties, ensure these are connected and
properly used. Use of dust collection can
reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the cor-
rect power tool for your application. The
correct power tool will do the job better
and safer at the rate for which it was de-
b) Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch
is dangerous and must be repaired.
c) Disconnect the plug from the power
source and/or the battery pack from the
power tool before making any adjust-
ments, changing accessories, or storing
power tools. Such preventive safety meas-
ures reduce the risk of starting the power
tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfa-
miliar with the power tool or these in-
structions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for misalign-
ment or binding of moving parts, break-
age of parts and any other condition that
may affect the power tool’s operation. If
damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean. Prop-
erly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories and tool
bits etc. in accordance with these instruc-
tions, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations differ-
ent from those intended could result in a
hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of fire when used with anoth-
er battery pack.
b) Use power tools only with specifically
designated battery packs. Use of any oth-
er battery packs may create a risk of injury
and fire.
c) When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a con-
nection from one terminal to another.
Shorting the battery terminals together
may cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
6) Service
a) Have your power tool serviced by a quali-
fied repair person using only identical re-
placement parts. This will ensure that the
safety of the power tool is maintained.
Safety Warnings
f Wait for the cutter to stop before setting the
tool down. An exposed cutter may engage the
surface leading to possible loss of control and
serious injury.
f Do not reach into the saw dust ejector with
your hands. They could be injured by rotating
f Apply the machine to the workpiece only
when switched on. Otherwise there is danger
of kickback when the cutting tool jams in the
workpiece. Page 16 Wednesday, January 16, 2008 3:29 PM
Page: 16
English | 17
Bosch Power Tools 1 609 929 N13 | (16.1.08)
f When working, always hold the planer in
such a manner that the planer base plate fac-
es flat on the workpiece. Otherwise the plan-
er can become wedged and lead to injuries.
f Never plane over metal objects, nails or
screws. The planer blade and the blade shaft
can become damaged and lead to increased
f Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
f Before any work on the machine (e. g. main-
tenance, changing the tool, etc.) as well as
during its transport and storage, lock the
On/Off switch in the off position. There is
danger of injury when the On/Off switch is un-
intentionally actuated.
f Avoid unintentional switching on. Ensure the
On/Off switch is in the off position before in-
serting battery pack. Carrying the power tool
with your finger on the On/Off switch or in-
serting the battery pack into power tools that
have the switch on invites accidents.
f Do not open the battery. Danger of short-
Protect the battery against heat, e. g.,
also against continuous sun irradiation
and fire. There is danger of explosion.
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
While reading the operating instructions, unfold
the graphics page for the machine and leave it
Intended Use
The machine is intended for planing of firmly sup-
ported wooden materials, such as beams and
boards. It is also suitable for beveling edges and
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
1 Chip ejector (alternatively right/left)
2 Depth adjustment knob
3 Planing depth scale
4 Chip ejection selector lever
5 Safety switch for On/Off switching
6 On/Off switch
7 Battery*
8 Battery unlocking button
9 Belt cover
10 Screws for belt cover
11 V-grooves
12 Planer base plate
13 Blade drum
14 Clamping element for blade
15 Fastening screw for planer blade
16 Carbide blade (TC)
17 Allen key*
18 Extraction hose (Ø 35 mm)*
19 Chip/dust bag*
20 Parallel guide*
21 Scale for rebating width
22 Locking nut for adjustment of rebating width
23 Fastening bolt for parallel and beveling guide
24 Angle stop*
25 Locking nut for angle adjustment
26 Fastening bolt for rebating depth stop
27 Rebating depth stop*
28 Drive belt
29 Large pulley
30 Small pulley
*The accessories illustrated or described are not in-
cluded as standard delivery.
**Commercially available (not included in the delivery
scope) Page 17 Wednesday, January 16, 2008 3:29 PM
Page: 17
1 609 929 N13 | (16.1.08) Bosch Power Tools
18 | English
Technical Data
Declaration of Conformity
We declare under our sole responsibility that the
product described under “Technical Data” is in
conformity with the following standards or
standardization documents: EN 60745 according
to the provisions of the directives 2004/108/EC,
98/37/EC (until Dec. 28, 2009), 2006/42/EC
(from Dec. 29, 2009 on).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
17.12.2007, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Noise/Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the prod-
uct are: Sound pressure level 81 dB(A); Sound
power level 92 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value ah =2.5 m/s2
, Uncertain-
ty K =1.5 m/s2
The vibration emission level given in this informa-
tion sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another. It
may be used for a preliminary assessment of ex-
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with differ-
ent accessories or poorly maintained, the vibra-
tion emission may differ. This may significantly
increase the exposure level over the total work-
ing period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
Planer GHO 14,4 V
GHO 18 V
Article number 0 601 595 4.. 3 601 E95 3..
Rated voltage V= 14.4 18
No-load speed rpm 13000 13000
Planing depth mm 0 – 1.6 0 – 1.6
Rebating depth mm 0 – 8 0 – 8
Planing width, max. mm 82 82
Weight according to EPTA-Procedure 01/2003 kg 2.9 3.1
Please observe the article number on the type plate of your machine. The trade names of the individual machines may
Dr. Egbert Schneider
Senior Vice President
Dr. Eckerhard Strötgen
Head of Product
Certification Page 18 Wednesday, January 16, 2008 3:29 PM
Page: 18
English | 19
Bosch Power Tools 1 609 929 N13 | (16.1.08)
f Before any work on the machine (e. g. main-
tenance, changing the tool, etc.) as well as
during its transport and storage, lock the
On/Off switch in the off position. There is
danger of injury when the On/Off switch is un-
intentionally actuated.
Battery Charging (see figure D)
A battery that is new or has not been used for a
longer period does not develop its full capacity
until after approx. 5 charging/discharging cycles.
To remove the battery 7, press the unlocking but-
tons 8 and pull the battery out of the machine to
the rear. Do not exert any force.
The Allen key 17 required for replacement of the
planer blade is located inside the machine and
should always be stored there.
The battery is equipped with a NTC temperature
control which allows charging only within a tem-
perature range of between 0 °C and 45 °C. A long
battery service life is achieved in this manner.
A significantly reduced working period after
charging indicates that the battery is used and
must be replaced.
Observe the notes for disposal.
Changing the Tool
f Be cautious when replacing the planer
blades. Do not grasp the planer blades by
the cutting edges. Possible danger of injury
due to the sharp cutting edges of the planer
Use only original Bosch carbide blades (TC).
The carbide blade (TC) has 2 cutting edges and
can be reversed. When both cutting edges are
dull, the planer blade 16 must be replaced. The
carbide blade (TC) may not be resharpened.
Disassembling the Planer Blade(s)
(see figure A)
To reverse or replace the planer blade 16, rotate
the blade drum 13 until it is parallel to the planer
base plate 12.
n Loosen the two fastening screws 15 with the
Allen key 17 by approx. 1 – 2 turns.
o If necessary, loosen the clamping element 14
by giving it a light blow with a suitable tool
(e.g. a wooden wedge).
p Push the planer blade 16 sidewards out of
the blade drum 13 with a piece of wood.
Assembling the Planer Blade(s) (see figure B)
The guide groove of the planer blade always en-
sures continuous height adjustment when re-
placing or reversing it.
If required, clean the blade seat in the clamping
element 14 and the planer blade 16.
When assembling the planer blade, ensure that it
is seated properly in the blade holder of the
clamping element 14 and aligned flush at the side
edge of the rear planer base plate 12. Afterwards
tighten the 2 fastening screws 15 again with the
Allen key 17.
Note: Before restarting, check if the fastening
screws 15 are tightened well. Rotate the blade
drum 13 by hand and ensure that the planer
blade does not graze.
Dust/Chip Extraction
f Dusts from materials such as lead-containing
coatings, some wood types, minerals and
metal can be harmful to one’s health. Touch-
ing or breathing-in the dusts can cause aller-
gic reactions and/or lead to respiratory infec-
tions of the user or bystanders.
Certain dusts, such as oak or beech dust, are
considered as carcinogenic, especially in con-
nection with wood-treatment additives (chro-
mate, wood preservative). Materials contain-
ing asbestos may only be worked by
– Use dust extraction whenever possible.
– Provide for good ventilation of the working
– It is recommended to wear a P2 filter-class
Observe the relevant regulations in your coun-
try for the materials to be worked. Page 19 Wednesday, January 16, 2008 3:29 PM
Page: 19
1 609 929 N13 | (16.1.08) Bosch Power Tools
20 | English
Clean the chip ejector 1 regularly. Use a suitable
tool (e.g., a piece of wood, compressed air, etc.)
to clean a clogged chip ejector.
f Do not reach into the saw dust ejector with
your hands. They could be injured by rotating
To ensure optimum extraction of dust/chips, al-
ways work with external dust extraction or a
chip/dust bag.
External Dust Extraction (see figure C)
An extraction hose (Ø 35 mm) 18 (accessory),
can be attached on either side of the chip ejec-
Connect the vacuum hose 18 to a vacuum cleaner
(accessory). An overview for connecting to vari-
ous vacuum cleaners can be found at the end of
this manual.
The vacuum cleaner must be suitable for the ma-
terial being worked.
When vacuuming dry dust that is especially detri-
mental to health or carcinogenic, use a special
vacuum cleaner.
Integrated Dust Extraction (see figure C)
A chip/dust bag (accessory) 19 can be used for
smaller jobs. Insert the sleeve of the chip/dust
bag firmly into the chip ejector 1. Empty the
chip/dust bag 19 at regulary intervals to maintain
optimum dust collection.
Choice of Chip Ejector Side
With the selector lever 4, the chip ejector 1 can
be switched to right or left. Always press the se-
lector lever 4 until it engages in the end position.
The selected ejection direction is indicated by an
arrow symbol on the selector lever 4.
Operating Modes
Adjusting the Planing Depth
With the adjustment knob 2, the planing depth
can be adjusted variably from 0–1.6 mm using
the planing depth scale 3
(scale graduation = 0.1 mm).
Starting Operation
Inserting the Battery
f Use only original Bosch O-pack batteries
with the voltage given on the type plate of
your machine. The use of other batteries can
lead to injuries and danger of fire.
Insert the charged battery 7 into the handle until
it can be felt to engage and faces flush against
the handle.
Switching On and Off
To start the machine, first push the lock-off but-
ton for the On/Off switch 5 and then press the
On/Off switch 6 and keep it pressed.
To switch off the machine, release the On/Off
switch 6.
Note: For safety reasons, the On/Off switch 6
cannot be locked; it must remain pressed during
the entire operation.
Run-on Brake
An integrated run-on brake reduces after-running
of the blade shaft after switching off the ma-
Working Advice
Set the required planing depth and place the
front part of the planer base plate 12 against the
f Apply the machine to the workpiece only
when switched on. Otherwise there is danger
of kickback when the cutting tool jams in the
workpiece. Page 20 Wednesday, January 16, 2008 3:29 PM
Page: 20
English | 21
Bosch Power Tools 1 609 929 N13 | (16.1.08)
Switch the machine on and guide the machine
with even feed over the surface to be planed.
To achieve high-grade surfaces, work only with
low feed and apply pressure on the centre of the
planer base plate.
When machining hard materials (e.g. hardwood)
as well as when utilising the maximum planer
width, set only low planing depths and reduce
planer feed, as required.
Excessive feed reduces the surface quality and
can lead to rapid clogging of the chip ejector.
Only sharp blades achieve good cutting capacity
and give the machine longer life.
Beveling Edges (see figure H)
The V-grooves in the front planer base plate allow
quick and easy beveling of workpiece edges. De-
pending on required bevel width, use the corre-
sponding V-groove. For this, place the planer
with the V-groove onto the edge of the workpiece
and guide it along the edge.
Planing with Parallel/Beveling Guide
(see figures E–G)
Mount the parallel guide 20 or beveling guide 24
to the machine using the corresponding fasten-
ing bolt 23. Depending on the application, mount
the rebating depth stop 27 with fastening bolt 26
to the machine.
Loosen the locking nut 22 and adjust the request-
ed rebating width on the scale 21. Tighten the
locking nut 22 again.
Adjust the requested rebating depth accordingly
with the rebating depth stop 27.
Carry out the planing procedure several times un-
til the requested rebating depth is reached.
Guide the planer applying sideward supporting
Beveling with the Beveling Guide
When beveling rebates
and surfaces, adjust the
required slope angle
with the angle adjust-
ment 25.
Maintenance and Service
Maintenance and Cleaning
f Before any work on the machine (e. g. main-
tenance, changing the tool, etc.) as well as
during its transport and storage, lock the
On/Off switch in the off position. There is
danger of injury when the On/Off switch is un-
intentionally actuated.
f For safe and proper working, always keep
the machine and ventilation slots clean.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts order,
please always include the 10-digit article number
given on the type plate of the machine.
Replacing the Drive Belt (see figures I–K)
Unscrew the screws 10 and take off the belt cov-
er 9. Remove the worn drive belt 28.
Before assembling a new drive belt 28, clean
both pulleys 29 and 30.
Place the new drive belt 28 on the small pulley 30
first and then work the drive belt 28 onto the
large pulley 29 by hand while rotating it.
Mount the belt cover 9 again and tighten the
screws 10.
Groove to be
Dimension a
none 0 – 2.5
small 1.0 – 3.5
medium 2.0 – 4.0
large 2.5 – 5.0 Page 21 Wednesday, January 16, 2008 3:29 PM
Page: 21
1 609 929 N13 | (16.1.08) Bosch Power Tools
22 | English
After-sales Service and Customer
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be found
Our customer consultants answer your questions
concerning best buy, application and adjustment
of products and accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: +61 (01300) 307 044
Fax: +61 (01300) 307 045
Inside New Zealand:
Phone: +64 (0800) 543 353
Fax: +64 (0800) 428 570
Outside AU and NZ:
Phone: +61 (03) 9541 5555
The machine, accessories and packaging should
be sorted for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into
household waste!
According the European Guideline
2002/96/EC for Waste Electrical
and Electronic Equipment and its
implementation into national right,
power tools that are no longer usable must be
collected separately and disposed of in an envi-
ronmentally correct manner.
Battery packs/batteries:
Ni-Cd: Nickel cadmium
Warning: These battery packs contain cadmium,
a highly toxic heavy metal.
Ni-MH: Nickel metal hydride
Do not dispose of battery packs/batteries into
household waste, fire or water. Battery
packs/batteries should be collected, recycled or
disposed of in an environmental-friendly manner.
Only for EC countries:
Defective or dead out battery packs/batteries
must be recycled according the guideline
Batteries no longer suitable for use can be
directly returned at:
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
Subject to change without notice. Page 22 Wednesday, January 16, 2008 3:29 PM
Page: 116
| 117
Bosch Power Tools 1 609 929 N13 | (16.1.08)
2 607 000 073 1x:
2 608 635 376
2 608 635 350
2 605 411 035
2 607 000 102
2 607 001 077
GAS 25
GAS 50
GAS 50 M
Ø 35 mm
3 m 2 609 390 392
5 m 2 609 390 393
14,4 V (NiMH)
2 607 335 686 (2,6 Ah)
2 607 335 694 (3,0 Ah)
18 V (NiMH)
2 607 335 688 (2,6 Ah)
2 607 335 696 (3,0 Ah)
14,4 V (NiCd)
2 607 335 678 (2,4 Ah)
18 V (NiCd)
2 607 335 680 (2,4 Ah) Page 117 Wednesday, January 16, 2008 3:29 PM
Page: 117
1 609 929 N13 | (16.1.08) Bosch Power Tools
118 |
AL 1419 DV
(7,2 – 14,4 V)
2 607 224 440 (EU)
2 607 224 442 (UK)
2 607 224 444 (AUS)
AL 1450 DV
(7,2 – 14,4 V)
2 607 224 702 (EU)
2 607 224 704 (UK)
2 607 224 706 (AUS)
AL 2450 DV
(7,2 – 24 V)
2 607 225 028 (EU)
2 607 225 030 (UK)
2 607 225 032 (AUS)
AL 2498 FC
(7,2 – 24 V)
2 607 224 484 (EU)
2 607 224 486 (UK)
2 607 224 488 (AUS) Page 118 Wednesday, January 16, 2008 3:29 PM

Question & answers

There are no questions about the Bosch GHO 18 V yet.

Ask a question about the Bosch GHO 18 V

Have a question about the Bosch GHO 18 V but cannot find the answer in the user manual? Perhaps the users of can help you answer your question. By filling in the form below, your question will appear below the manual of the Bosch GHO 18 V. Please make sure that you describe your difficulty with the Bosch GHO 18 V as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.