Bosch ARD-FPBEW2-H2 manual

Select a language NL 100%

View a manual of the Bosch ARD-FPBEW2-H2 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Bosch
  • Product: Fingerprint reader
  • Model/name: ARD-FPBEW2-H2
  • Filetype: PDF
  • Available languages:

Table of Contents

Page: 0
ARD‑FPBEW2‑H2 Fingerprint Reader,
Multiclass
ARD‑FPBEW2‑H2
en Installation manual
Page: 2
ARD-FPBEW2-H2 Fingerprint Reader, Multiclass Table of contents | en 3
Bosch Access Systems GmbH Installation manual 2019.04 | |
Table of contents
1 Safety and handling 4
2 Introduction 5
2.1 Components 5
2.2 Names and function of parts 6
2.3 Cables and Connectors 7
2.4 How to enroll a fingerprint 9
3 Installation 11
3.1 Fixing the bracket and the product 11
3.2 Power supply connection 13
3.3 Network connection - TCP/IP 14
3.4 Wiegand connection 15
3.5 RS 485 Connection 16
3.6 Resetting Network Settings 16
3.7 Restoring the Factory Defaults 16
4 Technical Data 17
4.1 Product Specifications 17
4.2 Dimensions 19
5 UL 20
5.1 UL 294 requirements 20
6 FCC 21
6.1 Compliance information 21
Page: 3
4 en | Safety and handling ARD-FPBEW2-H2 Fingerprint Reader, Multiclass
2019.04 | | Installation manual Bosch Access Systems GmbH
1 Safety and handling
Failure to follow these safety instructions could result in fire, electric shock, injury, or damage
to the product or other property. Read all the safety information before installing or using the
product.
Download, read and follow the respective technical documentation at boschsecurity.com
(where available) or read the documentation provided in the packaging. Retain documentation
for future reference.
Installation
– Do not install the product in a place with direct sunlight, moisture, dust, or soot.
– Do not install the product in a place with heat from an electric heater.
– Do not install the power supply cable in a passage area.
– Do not install the product near highly magnetic objects.
– Do not install the product in a place with electromagnetic interference.
– Install the product in a dry place.
– When installing more than one device, allow space between the devices.
Notice!
In case of malfunction, contact Bosch After-Sales Service.
Do not attempt to repair the product yourself or free after-sales service will not be provided.
Battery disposal and replacement
– Replace the RTC battery with the correct type of battery.
– Discard the battery according to the appropriate regional or international waste
regulations.
Handling the product
– Do not drop the product.
– Do not apply any impact to the product.
– Do not contaminate or damage the fingerprint contact unit with foreign substances.
– Do not spill any liquids on the product.
– Only operate the product from the type of power source indicated on the label. If unsure
of the type of power supply to use, contact your dealer.
Cleaning the product
– Wipe the product with a soft and dry cloth.
– Do not apply water, benzene or alcohol.
Notice!
For more information about this product, read the documentation provided in the packaging,
or visit us at http://www.boschsecurity.com.
Page: 4
ARD-FPBEW2-H2 Fingerprint Reader, Multiclass Introduction | en 5
Bosch Access Systems GmbH Installation manual 2019.04 | |
2 Introduction
2.1 Components
ARD-FPBEW2
Bracket
Ferrite Core
(1 EA)
Bracket Fixing Screw
(Star Shaped)
PVC anchor
(2 EA)
Heat shrink
Fixing screw
(2 EA)
Drilling template
OSS Manual Safety
Instructions
Quick
Installation
Guide
Page: 5
6 en | Introduction ARD-FPBEW2-H2 Fingerprint Reader, Multiclass
2019.04 | | Installation manual Bosch Access Systems GmbH
2.2 Names and function of parts
1
2
3
4
5
6
Item Feature
1 LED lamp
Indicates the operational status of the product with the color of the LED lamp.
2 RF card authentication unit
Reads RF cards for entering and exiting.
3 Fingerprint authentication unit
Reads fingerprints placed on it for entering and exiting.
4 Reset button
For details, see chapters 3.6 and 3.7
5 LED lamp for Network
Shows the status of the network connection.
6 Cable
– Wiegand cable
– Power cable
– RS485 cable
– Ethernet connector
Page: 6
ARD-FPBEW2-H2 Fingerprint Reader, Multiclass Introduction | en 7
Bosch Access Systems GmbH Installation manual 2019.04 | |
2.3 Cables and Connectors
* Cut the required wires off the connector plug.
Cable Cable name
A Wiegand cable
B Ethernet cable
C Power cable
D RS485 cable
Page: 7
8 en | Introduction ARD-FPBEW2-H2 Fingerprint Reader, Multiclass
2019.04 | | Installation manual Bosch Access Systems GmbH
Cable Cable name Color
1 WG Tamper NO Gray (White stripe)
2 WG Tamper COM Green (White stripe)
3 WG Tamper NC Orange (White stripe)
4 Not used Blue
Brown
5 Not used Red
Green
6 WG D0 Green
7 WG D1 White
8 WG GND Black
9 TTL IN1 (LED red) Brown
10 TTL IN0 (LED green) Purple
11 PWR +VDC Red
12 Not used Pink
13 PWR GND Black (White stripe)
14 485 TRXN (RxTx-) Yellow (Black stripe)
15 485 TRXP (RxTx+) Blue (White stripe)
16 485 PAG White (Black stripe)
17 ENET TXP White
18 ENET TXN Orange
19 ENET RXP Black
20 ENET RXN Yellow
Page: 8
ARD-FPBEW2-H2 Fingerprint Reader, Multiclass Introduction | en 9
Bosch Access Systems GmbH Installation manual 2019.04 | |
2.4 How to enroll a fingerprint
In order to improve the fingerprint authentication rate, register the fingerprint correctly. The
reader can recognize a fingerprint even if the angle and position of a user's fingerprint input
change. If you register the fingerprint with attention to the following instructions, the
authentication rate can be improved.
Selecting a finger for fingerprint input
– In preparation for the case that the fingerprint of a specific finger cannot be used, for
example if the user is lifting a load with one hand or a finger gets hurt, up to 10
fingerprints for each user can be registered.
– In the case of a user whose fingerprint cannot be recognized well, the authentication rate
can be improved by enrolling the same finger twice repeatedly.
– If a finger has a cut or the fingerprint is blurry, select another finger for the fingerprint.
– It is recommended to use the index finger or the middle finger when scanning the
fingerprint. The authentication rate can be reduced if it is difficult to place another finger
at the center of fingerprint sensor accurately.
Fingerprint enrollment method
1. Place the finger with the fingerprint to be registered on the fingerprint authentication unit
and press the finger gently for better authentication.
2. Wait for the instructions of the management system to place the finger a second time on
the sensor. Scan the fingerprint of the registered finger again.
Page: 9
10 en | Introduction ARD-FPBEW2-H2 Fingerprint Reader, Multiclass
2019.04 | | Installation manual Bosch Access Systems GmbH
Cautions for enrolling a fingerprint
When a fingerprint is recognized, it is compared with the initially registered fingerprint, so the
initial fingerprint enroll is the most important. Pay attention to the following matters when
enrolling the fingerprint:
1. Place the finger deep enough to contact with the sensor completely.
2. Place the center of the fingerprint in the center of the sensor.
3. If a finger has a cut or the fingerprint is blurry, select another finger for the fingerprint.
4. Scan the fingerprint correctly without moving according to the instruction on the screen.
5. If you make the finger upright so that the contact area with the sensor has decreased or
the angle of finger has warped, fingerprint authentication may not be performed.
Failure during fingerprint recognition
The reader can recognize a fingerprint regardless of a change of season or finger condition.
However, the authentication rate may vary according to the external environment or
fingerprint input method.
If the fingerprint authentication cannot be done smoothly, it is recommended to take the
following measures:
1. If the finger is smeared with water or sweat, dry off the finger and then scan the finger.
2. If the finger is too dry, blow your breath on the fingertips and then scan the finger.
3. If the finger has a cut, register the fingerprint of another finger.
4. The initially registered fingerprint often may have not been scanned correctly, so register
the fingerprint again according to ‘Cautions for enrolling a fingerprint’.
Page: 10
ARD-FPBEW2-H2 Fingerprint Reader, Multiclass Installation | en 11
Bosch Access Systems GmbH Installation manual 2019.04 | |
3 Installation
3.1 Fixing the bracket and the product
1. Determine the correct position to install the bracket using the provided drilling template.
2. Fix the bracket firmly using fixing screws through the bracket to the position where the
device will be installed.
3. Install the device onto the fixed bracket.
4. Assemble the device to the bracket by rotating the star-shaped fixing screw.
– When assembling the product with the bracket, use the included bracket fixing screw
(star-shaped) instead of the product fixing screw for enhanced security.
Page: 11
12 en | Installation ARD-FPBEW2-H2 Fingerprint Reader, Multiclass
2019.04 | | Installation manual Bosch Access Systems GmbH
Installing the device on a concrete wall
1. Drill holes on the wall.
2. Insert the PVC anchors.
3. Fix the anchors with fixing screws.
4. Maintain a minimum separation distance to avoid RF interference (see table below).
30 cm
30 cm
Wall thickness Distance
100 mm 270 mm
120 mm 250 mm
150 mm 170 mm
Page: 12
ARD-FPBEW2-H2 Fingerprint Reader, Multiclass Installation | en 13
Bosch Access Systems GmbH Installation manual 2019.04 | |
3.2 Power supply connection
UPS
(Optional)
12V DC
11 - PWR +VDC
13 - PWR GND
Red
Black (White stripe)
– Use a power supply adaptor of DC 12 V (± 10%) with a minimum of 1,500 mA which has
obtained the approval of IEC/EN 60950-1. If you wish to connect and use another device
to the power supply adaptor, you should use an adaptor with a current capacity which is
the same or larger than the total power consumption required for the terminal and
another device.
!
Warning!
Do not connect the device to the DC power supply(or adapter) and PoE power supply at the
same time.
Notice!
Make sure to isolate the power connector cables if PoE is used for power supply.
Page: 13
14 en | Installation ARD-FPBEW2-H2 Fingerprint Reader, Multiclass
2019.04 | | Installation manual Bosch Access Systems GmbH
3.3 Network connection - TCP/IP
LAN connection (connecting to a hub)
You can connect the product to a hub using a general type CAT-5 cable (or higher).
LAN connection (connecting to a PC directly)
The ARD-FPBEW2 has an automatic MDI/MDIX function so that it can be connected to a PC
directly using a normal straight type CAT-5 cable (or higher), not a cross cable.
Page: 14
ARD-FPBEW2-H2 Fingerprint Reader, Multiclass Installation | en 15
Bosch Access Systems GmbH Installation manual 2019.04 | |
3.4 Wiegand connection
Control device
1
2
3
6
7
8
9
10
1 - WG Tamper NO
2 - WG Tamper COM
3 - WG Tamper NC
6 - WG D0
7 - WG D1
8 - WG GND
9 - TTL IN 1 (LED red)
10 - TTL IN 0 (LED green)
Gray (White stripe)
Green (White stripe)
Orange (White stripe)
Green
White
Black
Brown
Purple
Page: 15
16 en | Installation ARD-FPBEW2-H2 Fingerprint Reader, Multiclass
2019.04 | | Installation manual Bosch Access Systems GmbH
3.5 RS 485 Connection
Control device
14 - 485 TRXN (RxTx-)
15 - 485 TRXP (RxTx+)
16 - 485 GND
Yellow (Black stripe)
Blue (White stripe)
White (Black stripe)
3.6 Resetting Network Settings
1. Turn the power on.
2. Press the network reset button on the rear of device until the device restart
automatically.
3. Connect the device with default values.
– TCP/IP address: DHCP address assignment (If DHCP address assignment is fails,
169.254.x.x will be set.)
– Server mode: Disabled
– RS-485: PC connection, 115200 bps
4. Change the TCP/IP address or RS-485 information.
5. Turn the power off later on and then check the network setting is properly.
3.7 Restoring the Factory Defaults
This will delete all data and root certificate on the device and reset the settings.
1. Turn the power on.
2. Press the reset button three times quickly.
3. When the yellow LED is blinking, press the reset button again.
NOTE
– If there is no root certificate on the device, you cannot restore the factory defaults.
Page: 16
ARD-FPBEW2-H2 Fingerprint Reader, Multiclass Technical Data | en 17
Bosch Access Systems GmbH Installation manual 2019.04 | |
4 Technical Data
4.1 Product Specifications
General
Biometric Fingerprint
Storage templates – Template on device
– Template in secure database of AMS or
BIS/ACE
Modes for access – Fingerprint plus card
– Fingerprint or card
– Card only
– Fingerprint only
Max. user – 400.000 (1:1 matching)
– 100.000 (1:N matching)
Max. template in DB – 4.000.000 (10 templates per person; 1:1
matching)
Card compatibility – EM (26 bit standard coding scheme)
– HID Prox (26 / 37 bit standard coding
scheme)
– MIFARE classic (ISO 14443A CSN /
Bosch code)
– MIFARE DESFire EV1 (ISO 14443A CSN /
Bosch code)
– iCLASS (26 / 37 bit standard coding
scheme)
– HID Corporate-1000 (35 / 48 bit
standard coding scheme)
– iCLASS SE (26 / 37 bit SIO - Secure
Identity Object)
– iCLASS Seos (26 / 37 bit SIO - Secure
Identity Object)
Page: 17
18 en | Technical Data ARD-FPBEW2-H2 Fingerprint Reader, Multiclass
2019.04 | | Installation manual Bosch Access Systems GmbH
Electrical
Operating voltage 12 VDC
Current draw 600 mA max. (peak)
Memory – 2GB flash
– 256MB RAM
CPU 1.2 GHz Quad Core
Sound Multi-tone buzzer
Tamper detection Supported
Interfaces – Ethernet (TCP/IP 10/100 Mbps) with
PoE (IEEE 802.3af)
– RS-485 (OSDP v2)
– Wiegand
Mechanical
Housing material Polycarbonate
Dimensions (H × W × D) 50 mm x 172 mm x 38.2 mm (top)
50 mm x 172 mm x 43.5 mm (bottom)
Weight 251 g
Color Silver / Black
LED color Multicolor
Environmental
Impact protection IK 09
Environmental rating IP 67
Operating temperature -20°C to +50°C (-4°F to 122°F)
Humidity 0% to 80%, no condensation of water
Page: 18
ARD-FPBEW2-H2 Fingerprint Reader, Multiclass Technical Data | en 19
Bosch Access Systems GmbH Installation manual 2019.04 | |
4.2 Dimensions
Page: 19
20 en | UL ARD-FPBEW2-H2 Fingerprint Reader, Multiclass
2019.04 | | Installation manual Bosch Access Systems GmbH
5 UL
5.1 UL 294 requirements
The following UL 294 levels apply:
– Destructive attack - level 2
– Line security - level 2
– Endurance - level 1
– Standby power- level 1
If the unit is powered by an external power supply, you can use:
– UL Listed Class 2 power supply with 12VDC
– UL 294B Listed PoE power source
Page: 20
ARD-FPBEW2-H2 Fingerprint Reader, Multiclass FCC | en 21
Bosch Access Systems GmbH Installation manual 2019.04 | |
6 FCC
6.1 Compliance information
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
Operation is subject to the following two conditions:
– This device may not cause harmful interference, and
– This device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void the user's authority to
operate the equipment under FCC rules.
This appliance and its antenna must not be co-located or operation in conjunction with any
other antenna or transmitter.
A minimum separation distance of 20 cm must be maintained between the antenna and the
person for this appliance to satisfy the RF exposure requirements.
Page: 22
Bosch Access Systems GmbH
Charlottenburger Allee 50
52068 Aachen
Germany
www.boschsecurity.com
© Bosch Access Systems GmbH, 2019

Question & answers

There are no questions about the Bosch ARD-FPBEW2-H2 yet.

Ask a question about the Bosch ARD-FPBEW2-H2

Have a question about the Bosch ARD-FPBEW2-H2 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Bosch ARD-FPBEW2-H2. Please make sure that you describe your difficulty with the Bosch ARD-FPBEW2-H2 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.