Bosch 1 600 A00 3NA manual

View a manual of the Bosch 1 600 A00 3NA below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Bosch
  • Product: Battery charger
  • Model/name: 1 600 A00 3NA
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian, Portuguese, Danish, Polish, Russian, Finnish, Romanian, Turkish, Slovak, Hungarian, Slovene, Croatian, Ukrainian

Table of Contents

Page: 2
3 |
1 609 92A 16B | (5.2.15) Bosch Power Tools
GAL 1830 W
2
5
3
4
1
1
OBJ_BUCH-2159-004.book Page 3 Thursday, February 5, 2015 12:26 PM
Page: 6
English | 7
Bosch Power Tools 1 609 92A 16B | (18.2.15)
ence or knowledge if a person re-
sponsible for their safety
supervises them or has instructed
them in the safe operation of the
charger and they understand the
associated dangers. Otherwise,
there is a danger of operating errors
and injuries.
Supervise children during use,
cleaningandmaintenance.Thiswill
ensure that children do not play with
the charger.
Only charge Bosch lithium-ion
batteries with a capacity over
2,0 Ah (more than 5 battery cells).
The battery voltage must match
the battery charging voltage of the
charger. Do not charge non-re-
chargeable batteries. Otherwise
there is danger of fire and explosion.
Keep the battery charger away from rain or
moisture. Penetration of water in the battery
charger increases the risk of an electric shock.
 Keep the battery charger clean. Contamination can lead
to danger of an electric shock.
 Before each use, check the battery charger, cable and
plug. If damage is detected, do not use the battery
charger. Never open the battery charger yourself.
Have repairs performed only by a qualified technician
and only using original spare parts. Damaged battery
chargers, cables and plugs increase the risk of an electric
shock.
 Do not operate the battery charger on easily inflamma-
ble surfaces (e. g., paper, textiles, etc.) or surround-
ings. The heating of the battery charger during the charg-
ing process can pose a fire hazard.
 In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
 Do not place metal objects on the charger or between
battery and charger. Metal objects can heat up and lead
to injuries.
 Do not place credit cards or other magnetic data carri-
ers near the charger. Stored data on these data carriers
can be deleted.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Intended Use
The charger is intended for recharging inductive Bosch Li-Ion
batteries (18 V). The inductive charging is performed by
means of a contactless charging process using magnetic in-
duction.
Product Features
The numbering of the product features refers to the illustra-
tion of the battery charger on the graphics page.
1 Inductive battery*
2 Standby indicator (green)
3 Charge status indicator
4 Error indicator (red)
5 Charging platform
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Battery Charger GAL 1830 W
Article number 2 607 225 8..
Battery charging voltage (auto-
matic voltage detection) V 18
Charging current A 3.0
Allowable charging temperature
range °C 0 – 45
Charging time for battery
capacity, approx. (80%) 100%
– 2.0 Ah min (35) 45
– 4.0 Ah min (65) 85
Number of battery cells 5 – 10
Weight according to
EPTA-Procedure 01/2003 kg 0.6
Protection class / II
OBJ_DOKU-41557-004.fm Page 7 Wednesday, February 18, 2015 7:10 AM
Page: 7
8 | English
1 609 92A 16B | (18.2.15) Bosch Power Tools
Declaration of Conformity 0560
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2006/95/EC,
1999/5/EC including their amendments and complies with
the following standards:
EN 60335-1:2012, EN 60335-2-29:2004 + A2:2010,
EN 62311:2008-01, Draft EN 300 330-1 V1.8.0:2014-
06, Draft EN 300 330-2 V1.6.0:2014-06,
EN 301 489-1 V1.9.2:2011-09,
EN 301 489-3 V1.6.1:2013-08.
14
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
Leinfelden, 18.08.2014
Operation
Starting Operation
 Observe the mains voltage! The voltage of the power
supply must correspond with the data given on the name-
plate ofthe battery charger. Battery chargers marked with
230 V can also be operated with 220 V.
Charging Procedure
The charging process begins as soon as the mains plug of the
charger is plugged into the socket outlet and the inductive
battery 1 or the power tool with battery 1 (with base of the
battery) is placed onto the charging platform 5.
Thechargingprocessonlybeginswhenthebatterycapacityis
less than 85 – 90 %. This prolongs the life of the battery.
Due to the intelligent charging method, the charging condi-
tionofthebatteryisautomaticallydetectedand thebatteryis
charged with the optimum charging current, depending on
battery temperature and voltage.
This gives longer life to the battery and always leaves it fully
charged when kept in the charger for storage.
Meaning of the Indication Elements
Continuous Light Standby Indicator (green) 2
The continuous light of the green standby indica-
tor 2 shows that the mains plug has been plugged
into the socket outlet and the charger is ready for
use.
Flashing Charge Status Indicator 3
The fast charging process is indicated by
the flashingoftherespective greenLEDof
the charge status indicator 3. When the re-
spectiveshareofthebatteryischarged,the
green flashing light changes to a green continuous light.
The battery can be removed at any time and used. When all
fiveLEDsindicateagreencontinuouslight, thebattery isfully
charged.
Continuous Light Error Indicator (red) 4
The continuous light of the red error indicator 4
shows that the temperature of the battery is out-
side of the permitted charging temperature range,
see section “Technical Data”. As soon as the per-
mitted temperature range is reached, the charger automati-
cally switches to fast charging.
Flashing Error Indicator (red) 4
The flashing light of the red error indicator 4 sig-
nals a different fault of the charger, see section
“Troubleshooting – Causes and Corrective Meas-
ures”.
Troubleshooting – Causes and Corrective Meas-
ures
Working Advice
With continuous or several repetitive charging cycles without
interruption, the charger can warm up. This is not meaningful
and does not indicate a technical defect of the battery charg-
er.
A significantly reduced working period after charging indi-
cates that the battery is used and must be replaced.
Maintenance and Service
After-sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Henk Becker
Executive Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Cause Corrective Measure
Red error indicator 4 flashes
No charging procedure possible
The battery is not positioned
(correctly)
Position the battery centrally
with the battery base on the
charging platform 5
Detection of foreign object
An object other than/in addi-
tion to the battery is on the
charging platform
Remove object
Wrong battery positioned Position a compatible battery
Battery pack defective Replace the battery
Standby indicator (green) 2 does not illuminate
Mains plug of battery charger
not plugged in (properly)
Insert mains plug (fully) into
the socket outlet
Socket outlet, mains cable or
battery charger defective
Check the mains voltage;
have the battery charger
checked by an authorised af-
ter-sales service agent for
Bosch power tools
OBJ_DOKU-41557-004.fm Page 8 Wednesday, February 18, 2015 7:10 AM
Page: 8
English | 9
Bosch Power Tools 1 609 92A 16B | (18.2.15)
Bosch’sapplicationserviceteam willgladlyanswerquestions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number on the type plate of the
battery charger.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: (021) 5512577
Fax: (021) 5513223
E-Mail: bsc@zsd.co.za
Bosch Headquarters
Midrand, Gauteng
Tel.: (011) 6519600
Fax: (011) 6519880
E-Mail: rbsa-hq.pts@za.bosch.com
People’s Republic of China
China Mainland
Bosch Power Tools (China) Co., Ltd.
567, Bin Kang Road
Bin Jiang District 310052
Hangzhou, P.R.China
Service Hotline: 4008268484
Fax: (0571) 87774502
E-Mail: contact.ptcn@cn.bosch.com
www.bosch-pt.com.cn
HK and Macau Special Administrative Regions
Robert Bosch Hong Kong Co. Ltd.
21st Floor, 625 King’s Road
North Point, Hong Kong
Customer Service Hotline: +852 2101 0235
Fax: +852 2590 9762
E-Mail: info@hk.bosch.com
www.bosch-pt.com.hk
Indonesia
PT Robert Bosch
Palma Tower 9th
& 10th
Floor
Jl. Let. Jend. TB Simatupang II S/06
Jakarta Selatan 12960
Indonesia
Tel.: (021) 3005 6565
Fax: (021) 3005 5801
E-Mail: boschpowertools@id.bosch.com
www.bosch-pt.co.id
Philippines
Robert Bosch, Inc.
28th Floor Fort Legend Towers,
3rd Avenue corner 31st Street,
Fort Bonifacio Global City,
1634 Taguig City, Philippines
Tel.: (02) 8703871
Fax: (02) 8703870
matheus.contiero@ph.bosch.com
www.bosch-pt.com.ph
Bosch Service Center:
9725-27 Kamagong Street
San Antonio Village
Makati City, Philippines
Tel.: (02) 8999091
Fax: (02) 8976432
rosalie.dagdagan@ph.bosch.com
OBJ_DOKU-41557-004.fm Page 9 Wednesday, February 18, 2015 7:10 AM

Question & answers

There are no questions about the Bosch 1 600 A00 3NA yet.

Ask a question about the Bosch 1 600 A00 3NA

Have a question about the Bosch 1 600 A00 3NA but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Bosch 1 600 A00 3NA. Please make sure that you describe your difficulty with the Bosch 1 600 A00 3NA as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.