Black & Decker EC400 manual

Select a language NL 100%

View a manual of the Black & Decker EC400 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Black & Decker
  • Product: Tin opener
  • Model/name: EC400
  • Filetype: PDF
  • Available languages: , ,

Table of Contents

Page: 1
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be
followed, including the following:
■ PLEASE READ ALL INSTRUCTIONS.
■ To protect against risk of electrical shock, do not put can opener, cord, or plug
in water or other liquid.
■ Close supervision is necessary when any appliance is used by or near children.
■ Unplug from outlet when not in use, before putting on or taking off parts, and
before cleaning.
■ Avoid contacting moving parts.
■ Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions or is dropped or damaged in any manner. Return the
appliance to an authorized service facility for examination, repair, or electrical
or mechanical adjustment.
■ Keep the cord away from the Knife Sharpener (selected models only) and the
path of the knife being sharpened to prevent fire or shock hazard.
■ The use of attachments not recommended or sold by the appliance
manufacturer may cause fire, electric shock or injury.
■ Do not use outdoors.
■ Do not let cord hang over edge of table or counter or touch hot surfaces.
■ Do not open pressurized (aerosol type) cans.
■ Do not open cans of flammable liquids such as lighter fluids.
■ Do not operate this appliance in the presence of explosive and/or flammable
fumes.
■ This appliance is intended for household use only and not for commercial or
industrial use.
POLARIZED PLUG
This appliance has a polarized plug—
one blade is wider than the other. To
reduce the risk of electric shock, this
plug will fit into a polarized outlet only
one way. If the plug does not fit fully into
the outlet, reverse it. If it still does not
fit, contact a qualified electrician. Do
not attempt to defeat this safety feature
by modifying the plug in any way.
SAVE THESE INSTRUCTIONS
Blade
Assembly
Lever
Can
Opener
Body
Cord Storage (Under Unit)
Locating
Post
Knife Sharpener
(Selected
Models Only)
Magnet
2
Cover
Page: 2
How to use
1. Your Blade Assembly has been packed in a separate
cardboard insert. Attach it to the can opener by lin-
ing up the key tabs with the key slots, push in and
turn (A) until it locks into position.
2. Plug the cord into a standard, 120-volt electrical outlet.
3. Lift the Lever, tip the can so that the rim is under the
Locating Post, then push down on the Lever, making sure
the cutter blade is inside the rim. (Figure B) Because of
the hands-free feature, it is not necessary to hold the
Lever down or support the can during cutting. However,
you may have to hold the Can Opener Body when
cutting very tall or heavy cans.
4. When the can is opened, the Can Opener will stop
automatically. To remove the can, hold it with one
hand and raise the Lever with the other. CAUTION:
Avoid contact with the cut edges of the can or lids—
they are sharp. Carefully remove the lid from the
magnet, and discard.
5. You may “stuff” excess cord back into the bottom of
the unit and feed the cord through the notch for
convenient storage. (C)
3
CAN OPENING TIPS
• This Can Opener should not be used to open cans
designed to be opened by another method, such as a
pull tab, peel-off foil seal, or rolling key. This Can
Opener will not open rimless cans or cans with angled
corners.
• If there is a dent in the rim of a can, open the other
end or start the cutting action just beyond the dent.
Cans with heavy seams, uneven rims or odd shapes
may cause the Can Opener to stall. If this occurs,
turn the can slightly by hand to aid the cutting action.
• Frozen juices or foods in cardboard cans should be opened as soon as they are
removed from the freezer. Aluminum lids will not stick to the Magnet.
KNIFE SHARPENING TIPS (Selected Models Only)
• Clean and dry knives before sharpening.
• Do not attempt to sharpen serrated blades, as this will smooth their edges. Do not
attempt to sharpen scissors.
A
C
B
Cover
Page: 3
USING THE KNIFE SHARPENER (Selected Models Only)
1. The slot in the Knife Sharpener is slanted for left or right handed use.
2. For best results, sharpen the entire blade length in one continuous stroke careful-
ly pulling the blade through the slot and slightly up towards you.(D) Repeat until
you achieve desired sharpness. Wash and dry knives after sharpening. Use cau-
tion with blade after sharpening.
CLEANING YOUR CAN OPENER
1. Before cleaning any part of the Can Opener, unplug
the cord.
2. To remove the Blade Assembly for easy cleaning, lift
the Lever up and pull the Blade Assembly out (see A).
The Assembly can be washed by hand in hot, sudsy
water, rinsed or wiped with a sponge and dried thor-
oughly. It is NOT dishwasher-safe. Reverse the
procedure to replace the Blade Assembly.
3. Before replacing the Blade Assembly, wipe the Can
Opener body, and area around the drive wheel with a
slightly damp cloth or sponge.
SERVICE OR REPAIR
Service, if necessary, must be performed by a Black & Decker Household Appliance
Company-Owned or Authorized Service Center. The Service Center nearest you can
usually be found in the yellow pages of your phone book under “Appliances-Small-
Repairing,” on the enclosed Service Center Insert or by calling the appropriate toll-free
“800” number on the cover of this book.
If mailing or shipping your Can Opener, pack it carefully in a sturdy carton with enough
packing material to prevent damage. Include a note describing the problem to our
Service Center and be sure to give your return address. We also suggest that you insure
the package for your protection.
FULL TWO-YEAR WARRANTY
Black & Decker warrants this product against any defects that are due to faulty material
or workmanship for a two-year period after the original date of consumer purchase or
receipt as a gift. This warranty does not include damage to the product resulting from
accident or misuse. If the product should become defective within the warranty period,
we will repair it or elect to replace it free of charge. We will return your product, trans-
portation charges prepaid, provided it is delivered prepaid to any Black & Decker
Household Appliance Company-Owned or Authorized Service Center.
This warranty gives you specific legal rights and you may also have other rights which
vary from state to state or province to province. Answers to any questions regarding
warranty or service locations may be obtained by calling Consumer Assistance and
Information toll free, in the U.S.: 1-800-231-9786; in Canada: 1-800-465-6070.
4
D
Cover
Page: 11
12
Listed by Underwriters Laboratories Inc. (UL) (CUL)
Approved by Norma Official Mexican (NOM)
Copyright © 1997 Black & Decker
Pub. No. 168633-61-RV00
Printed in People’s Republic of China
Enlistado por Underwriters Laboratories, Inc.
Aprobado por Norma Oficial Mexicana (NOM)
Impreso en la República Popular China
Homologué par l’organisme Underwriters Laboratories Inc. (UL) (CUL)
Approuvé par l’organisme NOM
Imprimé en République populaire de Chine
Black & Decker, S.A. de C.V.
1,2 (1,2) A 120V ˜ 60 Hz
Importado por Black & Decker, S.A. de C.V., Bosques de Cidros,
Acceso Radiatas No. 42, Bosques de Las Lomas, 05120 Mexico, D.F.
Tel: 326-7100
Cover

Question & answers

There are no questions about the Black & Decker EC400 yet.

Ask a question about the Black & Decker EC400

Have a question about the Black & Decker EC400 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Black & Decker EC400. Please make sure that you describe your difficulty with the Black & Decker EC400 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.