Page: 2
IMPORTANT SAFETY INSTRUCTIONS
EN
Visit the Bestway YouTube channel
OWNER’S MANUAL
58381/58383/58386 Filter Pump
WE SUGGEST NOT TO RETURN
THE PRODUCT TO THE STORE
QUESTIONS? PROBLEMS?
MISSING PARTS?
For FAQ, Manuals, Videos Or
Spare Parts, Please Visit
bestwaycorp.com/support
V
i
s
i
t
w
w
w .bestwaycorp.com/suppo
r
t
f
o
r
h
e
l
p
READ AND FOLLOW ALL INSTRUCTIONS
Carefully read, understand, and follow all information in this user manual
before installing and using the Filter Pump. These warnings, instructions,
and safety guidelines address some common risks of water filtration
systems, but they cannot cover all risks and dangers in all cases.
Always use caution, common sense, and good judgment when enjoying
any water activity. Retain this information for future use. In addition,
the following information can be supplied depending on the Filter Pump
type. Keep the instructions in a safe place. If instruction is missing,
search it on the website www.bestwaycorp.com/support.
WARNING
• The pump is to be supplied by an isolating transformer or supplied
through a residual current device (RCD) having a rated residual
operating current not exceeding 30 mA.
• The plug of pump shall be at least 3.50 m away from the pool.
• The pump cannot be using while people are inside the pool.
• The supply cord cannot be replaced. If the cord is damaged the
appliance should be scrapped.
• This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall not be made by
children without supervision.
• When the appliance will be not used for a long time, such as in the
winter, the pool set should be disassembled and stored indoor.
• The appliance must be placed more than 2 m away from the pool.
Electric installations should follow national wiring rules.
2
Page: 3
DISPOSAL
Electrical products should not be disposed of with household waste. Please recycle
where facilities exist. Check with your local authority or retailer for recycling advice.
SAFETY TECHNICAL INSTRUCTIONS
• The appliance must be supplied by a grounded power source.
• Extension cords can’t be used.
• In case of damage to the filter pump, do not use the pool.
• Do not bury cord. Locate cord to minimize abuse from lawn mowers,
hedge trimmers, and other equipment.
• This pump is for use with storable pools only. Do not use with
permanently-installed pools. A storable pool is constructed so that it is
capable of being readily disassembled for storage and reassembled
• Only the media provided or specified by the manufacturer is to be
used with product installation.
• It is essential to check that the suction openings are not obstructed.
• It is advisable to stop the filtration during maintenance operations on
the filtration system.
• Regularly monitor the filter clogging level.
• A weekly check is recommended for cleaning.
• Minimum daily filtration operating time of 8 hours is recommended
to ensure clear pool water.
• It is essential to change any damaged element or set of elements as
soon as possible. Use only parts approved by person responsible for
placing the product on the market.
• All filters and filter media shall be inspected regularly to ensure that
there is not a build-up of detritus thus preventing good filtration.
The disposal of any used filter media should also be in accordance
with applicable regulations/legislation.
• The water circulation installation shall comply with the European as well
as national/local regulations, especially when dealing with electrical
issues. Any change of valve position, pump size, grille size can cause
a change of the flow and the suction velocity can be increased.
• It is necessary to have the plug accessible after installation of the pool.
• Please read the instruction manual carefully and keep it for future
reference.
• If instruction is missed, please contact with Bestway or search it in
website: www.bestwaycorp.com.
3
Page: 4
to its original integrity. A permanently-installed pool is constructed
in or on the ground or in a building such that it cannot be readily
disassembled for storage.
• Using the pump with an unmatched electrical supply is dangerous
and will result in catastrophic failure of pump.
• When working with electricity, turn the electrical power off at the
circuit breaker and lock breaker door. Failure to do so will result in
increased risk of shock, injury and possibly death.
• Do not remove the grounding prong or modify the plug in any way.
Do not use adapter plugs. Consult a qualified electrician for any
questions related to the validity of your plug's grounding.
• Handle the pump with care. Do not pull or carry the pump by the power
cord. Never pull a plug from the outlet by yanking the power cord.
Keep cord free from abrasions. Sharp objects, oil, moving parts, and
heat should never be exposed to the filter pump.
• Cleaning and user maintenance must be performed by an adult above
18 years old who is familiar with the risk of electric shock.
• Consult a qualified electrician for any questions.
• In case of doubt on the pump or any circulation devices, contact a
qualified installer, or the manufacturer/importer/distributor.
• Mind all the safety requirements and recommendations described
in the manual.
• Please examine equipment before use. Notify Bestway at the customer
service address listed on this manual for any manufacturing defect
or missing parts at the time of purchase. Verify that the equipment
components represent the filter pump model that you had intended
to purchase.
• Atmospheric conditions may affect the performance and life span of
your filter pump. Unnecessary wear and tear may occur during periods
of cold, heat and exposure to sun. Whenever possible, shelter the
pump from these conditions.
• It is important to ensure the factory equipped stopper plugs for the inlet
and outlet ports replace the screens before removal or maintenance
on the pump is attempted.
• Do not add chemicals in the filter pump.
• Don’t plug or unplug the appliance if your hand is wet.
• Always unplug the appliance: on rainy days, before cleaning or other
maintenance, and when leaving it unattended on holidays.
• This product is not intended for commercial use.
4
Page: 5
MAINTENANCE
• Make sure that the Filter Pump is unplugged before any maintenance.
• For the maintenance instructions, refer to illustration steps inside this manual. Drawings are for illustration purposes
only. May not reflect actual product. Not to scale.
• To optimize the Filter Pump performance and for sanitary reasons, we suggest replacing the filter cartridge with a new
one every two weeks.
INSTALLATION
• For the installation instructions, refer to the illustration steps . Drawings are for illustration purposes only. May not
reflect actual product. Not to scale.
• Bestway will not be responsible for any damage caused to the Filter Pump due to mishandling or failure to follow these
instructions.
• It is imperative to check that the hydraulic connectors are not obstructed.
• Do not dry run the Filter Pump. Make sure both the pool's inlet and outlet valves are fully covered by water before
operating the Filter Pump.
SETUP
CHECK LIST
To check the parts included in the box, consult the part list inside this manual. Verify that the equipment components
represent the model that you had intended to purchase. In case of any damaged or missing parts at the time of purchase,
visit our website bestwaycorp.com/support.
CHOOSE THE CORRECT LOCATION
Place the Filter Pump on a solid and level ground; it must be positioned on the same level as the base of the pool. If the
Filter Pump is in an upper or lower position than the base of the pool, the performance and life span of the Filter Pump can
be compromised. The pool and the Filter Pump have to be positioned in an area with adequate drainage and easy access
for maintenance operations. Never place the Filter Pump in a area that may accumulate water.
ATTACHING A BASE
FOR 330GAL
EN60335-2-41 TEST standard requires the filter pump to be vertically fixed
on the ground or a base made of wood or concrete before use. There should
be two holes 9 mm in diameter on the base, the space between which
should be 127 mm. Put filter pump on the base and attach them together
by fastening the bolts and nuts. All the base parts should weigh at least
over 18 kg to prevent the pump from accidentally falling.
5
390
127
40
390
250
127
2-M8 nut
2-M8 bolt
FOR 530GAL
EN60335-2-41 TEST standard requires the filter pump to be vertically fixed
on the ground or a base made of wood or concrete before use. There should
be two holes 9 mm in diameter on the base, the space between which
should be 159 mm. Put filter pump on the base and attach them together
by fastening the bolts and nuts. All the base parts should weigh at least
over 18 kg to prevent the pump from accidentally falling.
390
159
40
390
250
159
2-M8 nut
2-M8 bolt
FOR 800GAL
EN60335-2-41 TEST standard requires the filter pump to be vertically fixed
on the ground or a base made of wood or concrete before use. There should
be two holes 9 mm in diameter on the base, the space between which
should be 166 mm. Put filter pump on the base and attach them together
by fastening the bolts and nuts. All the base parts should weigh at least
over 18 kg to prevent the pump from accidentally falling.
390
166
40
390
250
166
2-M8 nut
2-M8 bolt
WARRANTY TERMS
For information concerning warranty terms, visit our website at: www.bestwaycorp.com.
STORAGE
• Remove all accessories; be sure that Filter Pump, hoses and debris screens are completely clean and dry before the
storage. If all the parts are not completely dry, mold may result.
• Before storage, remove and dispose of the filter cartridge.
• We strongly recommend disassembling the Filter Pump when the environment temperature is below 10ºC / 50ºF.
• Store the Filter Pump in a dry place with a moderate temperature between 10ºC / 50ºF and 38ºC / 100ºF.
Page: 6
303021293257
For support please visit us at:
bestwaycorp.com/support
©2022 Bestway Inflatables & Material Corp.
All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle Rechte vorbehalten/Tutti i diritti riservati
Trademarks used in some countries under license from/
Marques utilisées dans certains pays sous la licence de/
Marcas comerciales utilizadas en algunos países bajo la licencia de/
Die Warenzeichen werden in einigen Ländern verwendet unter Lizenz der/
Marchi utilizzati in alcuni paesi concessi in licenza a
Bestway Inflatables & Material Corp., Shanghai, China
Manufactured, distributed and represented in the European Union by/
Fabriqués, distribués et représentés dans l’Union Européenne par/Fabricado, distribuido y representado en la Unión Europea por/
Hergestellt, vertrieben und in der Europäischen Union vertreten von/Prodotto, distribuito e rappresentato nell'Unione Europea da
Bestway (Europe) S.p.a., Via Resistenza, 5, 20098 San Giuliano Milanese (Milano), Italy
Distributed in Latin America by/Distribué en Amérique latine par/Distribuido en Latinoamérica por/Distribuído na América Latina por
Bestway Central & South America Ltda, Salar Ascotan 1282, Parque Enea, Pudahuel, Santiago, Chile
Distributed in Australia & New Zealand by Bestway Australia Pty Ltd, Unit 2/98-104 Carnarvon St Silverwater, NSW 2128, Australia
Tel: Australia: (+61) 2 9037 1388; New Zealand: 0800 142 101
Distributed in United Kingdom by Bestway Corp UK Ltd. 8 Wentworth Road, Heathfield Industrial Estate, Newton Abbot, Devon, TQ12 6TL
Exported by/Exporté par/Exportado por/Exportiert von/Esportato da
Bestway (Hong Kong) International Ltd./Bestway Enterprise Company Limited
Suite 713, 7/Floor, East Wing, Tsim Sha Tsui Centre, 66 Mody Road, Kowloon, Hong Kong
www.bestwaycorp.com
Question & answers
Have a question about the Bestway Flowclear 58383 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Bestway Flowclear 58383. Please make sure that you describe your difficulty with the Bestway Flowclear 58383 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.
I need a pump cover gasket for pump model 58383 patty number 10325
The pump working good for 15 ,20minutes,stop and after 10 minutes its working again.the motor is hot, maybe it's the reason.but why the motor heat? I replaced the filter.i release the air. What i do wrong? Thanks
Ask a question about the Bestway Flowclear 58383