Beko CBI7702 manual

View a manual of the Beko CBI7702 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Beko
  • Product: Refrigerator
  • Model/name: CBI7702
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Italian

Table of Contents

Page: 1
Please read this manual first!
Dear Customer,
We hope that your product, which has been produced in modern plants and
checked under the most meticulous quality control procedures, will provide you
an effective service.
For this, we recommend you to carefully read the entire manual of your product
before using it and keep it at hand for future references.
This manual
• Will help you use your appliance in a fast and safe way.
• Read the manual before installing and operating your product.
• Follow the instructions, especially those for safety.
• Keep the manual in an easily accessible place as you may need it later.
• Besides, read also the other documents provided with your product.
Please note that this manual may be valid for other models as well.
Symbols and their descriptions
This instruction manual contains the following symbols:
C	 Important information or useful usage tips.
A	 Warning against dangerous conditions for life and property.
B	 Warning against electric voltage.
This product bears the selective sorting symbol for waste electrical and
electronic equipment (WEEE).
This means that this product must be handled pursuant to European Directive
2002/96/EC in order to be recycled or dismantled to minimize its impact on
the environment. For further information, please contact your local or regional
authorities.
Electronic products not included in the selective sorting process are potentially
dangerous for the environment and human heatlh due to the presence of
hazardous substances.
Recycling
Page: 2
EN
2
1 Your refrigerator	 3
2 Warnings	 4
Intended use......................................4
General safety....................................4
Things to be done for energy saving...7
HCA Warning.....................................7
3 Installation	 8
Preparation.
........................................8
Points to be considered when re-
transporting your refrigerator..............8
Before operating your refrigerator.......8
Electric connection.............................9
Disposing of the packaging................9
Disposing of your old refrigerator........9
Replacing the interior light bulb ........10
Reversing the doors.........................11
CONTENTS
4 Using your refrigerator	 12
Control Panel .
..................................12
Switching on for the first time...........12
Temperature display & adjustment....12
Thermostat setting button................14
Defrost.............................................14
Zero temperature compartment........15
5 Maintenance and
cleaning	 16
Protection of plastic surfaces ...........16
6 Recommended solutions
for the problems	 17
Page: 3
EN
3
Figures that take place in this instruction manual are schematic and may not
correspond exactly with your product. If the subject parts are not included in the
product you have purchased, then it is valid for other models.
1 Your refrigerator
1)	 Control panel
2)	 Thermostat knob
3)	 Lamp housing
4)	 Movable shelves
5)	 Defrost water collection channel -
Drain tube
6)	 Zero temperature compartment
7)	 Ice bank
8)	 Freezer compartment
9)	 Air grill
10)	 Adjustable door shelves
11)	 Egg compartment
12)	 Bottle shelf
13)	 Fridge compartment
14)	 Freezer compartment
1
3
7
8
8
4
8
4
9
6
4
10
12
11
5
2
13
14
10
10
1
Page: 4
EN
4
2 Warnings
.Please review the following
information. If these are not followed,
personal injury or material damage
may occur. Otherwise, all warranty and
reliability commitments will become
invalid.
The usage life of the unit you
purchased is 10 years. This is the
period for keeping the spare parts
required for the unit to operate as
described.
Intended use
.	 This product is designed for domestic
use.
.	 It should not be used outdoors. It is
not appropriate to use it outdoor even
if the place is covered with a roof.
General safety
.	 When you want to dispose/scrap
the product, we recommend you
to consult the authorized service in
order to learn the required information
and authorized bodies.
. 	 Consult your authorized service for
all your questions and problems
related to the refrigerator. Do not
intervene or let someone intervene to
the refrigerator without notifying the
authorized services.
.	 Do not eat cone ice cream and ice
cubes immediately after you take
them out of the freezer compartment!
(This may cause frostbite in your
mouth.)
.	 Do not put bottled and canned
liquid beverages in the freezer
compartment. Otherwise, these may
burst.
.	 Do not touch frozen food by hand;
they may stick to your hand.
. 	 Vapor and vaporized cleaning
materials should never be used in
cleaning and defrosting processes of
your refrigerator. In such cases, the
vapor might get in contact with the
electrical parts and cause short circuit
or electric shock.
.	 Never use the parts on your
refrigerator such as the door as a
means of support or step.
.	 Do not use electrical devices inside
the refrigerator.
.	 Do not damage the cooling circuit,
where the refrigerant is circulating,
with drilling or cutting tools. The
refrigerant that might blow out when
the gas channels of the evaporator,
pipe extensions or surface coatings
are punctured may cause skin
irritations and eye injuries.
.	 Do not cover or block the ventilation
holes on your refrigerator with any
material.
.	 Repairs of the electrical appliances
must only be made by qualified
persons. Repairs performed by
incompetent persons may create a
risk for the user.
Page: 5
EN
5
.	 In case of any failure or during
a maintenance or repair work,
disconnect your refrigerator’s mains
supply by either turning off the
relevant fuse or unplugging your
appliance.
.	 Do not pull by the cable when pulling
off the plug.
.	 Place the beverage with higher proofs
tightly closed and vertically.
.	 Flammable items or products that
contain flammable gases (e.g.
spray) as well as the explosive
materials should never be kept in the
appliance.
.	 Do not use mechanical devices
or other means to accelerate the
defrosting process, others than those
recommended by the manufacturer.
.	 This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
.	 Children should be supervised to
ensure that they do not play with the
appliance
.	 Do not operate a damaged
refrigerator. Consult your service if
you have any doubts.
.	 Electrical safety of your refrigerator
shall be guaranteed only if the earth
system in your house complies with
standards.
.	 Exposing the product to rain, snow,
sun and wind is dangerous with
respect to electrical safety.
.	 Contact the authorized service when
there is a power cable damage and
etc. so that it will not create a danger
for you.
.	 Never plug the refrigerator into
the wall outlet during installation.
Otherwise, risk of death or serious
injury may arise.
. 	 If you have a lock on the door, the
key should be kept out of reach of
children.
. 	 This refrigerator is designed solely for
storing food. It should not be used for
any other purposes.
. 	 The label that describes the technical
specification of the product is
located on the inner left part of the
refrigerator.
. 	 Do not hook up the refrigator to
electronic energy saving systems as it
may damage the product.
. 	 If the refrigerator has blue light do not
look at the blue light through optical
devices.
. 	 If the power supply is disconnected
in manually controlled refrigerators
please wait for at least 5 minutes
before reconnectig the power.
. 	 This product manual should be
passed to the next owner of the
refrigerator if the owner changes.
Page: 6
EN
6
. 	 When moving the refrigerator make
sure that you do not damage the
power cord. In order to prevent
fire the power cord should not be
twisted. Heavy objects should not
be placed on the power cord. When
the refrigerator is being plugged do
not handle the power outlet with wet
hands.
. 	 Do not plug the refrigerator if the
electric outlet is loose.
. 	 Do not splash water directly on the
outer or inner parts of the refrigerator
due to safety.
. 	 Do not spray inflammable materials
such as propane gas etc near
refrigerator due to the risk of fire and
explosion.
. 	 Do not place objects filled with water
on top of the refrigerator as it may
result in electric shock or fire.
. 	 Do not overload the refrigerator with
excess food. The excess food may
fall when the door is opened resulting
in injuring you or damaging the
refrigerator. Do not place objects on
top of the refrigerator as the objects
may fall when opening or closing the
refrigerator door.
. 	 Materials that require certain
temperature conditions such as
vaccine, temperature sensitive
medicines, scientific materials etc
should not be kept in refrigerator.
. 	 If refrigerator will not be operated for
an extended period of time it should
be unplugged. A problem in electrical
cable insulation may result in fire.
. 	 The tip of the electric plug should be
cleaned regularly otherwise it may
cause fire.
. 	 The refrigerator may move when the
adjustable feet is not positioned firmly
on the floor. Using the adjustable feet
you can unsure that the refrigerator is
positioned firmly on the floor.
. 	 If the refrigerator has door handle
do not pull the refrigerator via door
handles when moving the product as
it may disconnect the handle from the
refrigerator.
Page: 7
EN
7
HCA Warning
If your product is equipped with
a cooling system that contains
R600a:
This gas is flammable. Therefore, pay
attention to not damaging the cooling
system and piping during usage and
transportation. In the event of damage,
keep your product away from potential
fire sources that can cause the
product catch a fire and ventilate the
room in which the unit is placed.
Ignore the warning.
If your product is equipped with
a cooling system that contains
R134a.
You can see the gas used in
production of your product on the
rating plate that is located on the left
inner part of it.
Never dispose the product in fire.
Things to be done for energy
saving
.	 Do not leave the doors of your
refrigerator open for a long time.
.	 Do not put hot food or drinks in your
refrigerator.
.	 Do not overload your refrigerator so
that the air circulation inside of it is not
prevented.
.	 Do not install your refrigerator
under direct sunlight or near heat
emitting appliances such as ovens,
dishwashers or radiators.
.	 Pay attention to keep your food in
closed containers.
Page: 8
EN
8
3 Installation
Please remember that the
manufacturer shall not be held liable if
the information given in the instruction
manual is not observed.
Preparation
C	Your refrigerator should be installed at
least 30 cm away from heat sources
such as hobs, ovens, central heater
and stoves and at least 5 cm away
from electrical ovens and should not
be located under direct sunlight.
C	The ambient temperature of
the room where you install your
refrigerator should at least be 10°C.
Operating your refrigerator under
cooler conditions than this is not
recommended with regard to its
efficiency.
C	Please make sure that the interior
of your refrigerator is cleaned
thoroughly.
C	If two refrigerators are to be installed
side by side, there should be at least
2 cm distance between them.
C	When you operate your refrigerator
for the first time, please observe the
following instructions during the initial
six hours.
	 - The door should not be opened
frequently.
	 - It must be operated empty without
any food in it.
	 - Do not unplug your refrigerator. If
a power failure occurs out of your
control, please see the warnings in
the “Recommended solutions for the
problems” section.
C	Original packaging and foam
materials should be kept for future
transportations or moving.
Points to be considered
when re-transporting your
refrigerator
1.	 Your refrigerator must be
emptied and cleaned prior to any
transportation.
2.	 Shelves, accessories, crisper and etc.
in your refrigerator must be fastened
securely by adhesive tape against any
jolt before repackaging.
3.	 Packaging must be tied with thick
tapes and strong ropes and the
rules of transportation printed on the
package must be followed.
Please remember…
Every recycled material is an
indispensable source for the nature
and for our national resources.
If you wish to contribute to recycling
the packaging materials, you can
get further information from the
environmental bodies or local
authorities.
Before operating your
refrigerator
Before starting to use your refrigerator
check the following:
1.	 Is the interior of the refrigerator dry
and can the air circulate freely in the
rear of it?
2.	 Insert the 2 plastic wedges onto
the rear ventilation as illustrated in
the following figure. Plastic wedges
will provide the required distance
between your refrigerator and the wall
in order to allow the air circulation.
Page: 9
EN
9
3.	 Clean the interior of the refrigerator as
recommended in the “Maintenance
and cleaning” section.
4.	 Plug the refrigerator into the wall
outlet. When the fridge door is open
the fridge compartment interior light
will come on.
5.	 You will hear a noise as the
compressor starts up. The liquid and
gases sealed within the refrigeration
system may also give rise to noise,
even if the compressor is not running
and this is quite normal.
The specified voltage must be equal to
your mains voltage.
Extension cables and multiway plugs must
not be used for connection.
A damaged power cable must be replaced
by a qualified electrician.
Product must not be operated before it
is repaired! There is danger of electric
shock!
Disposing of the packaging
The packing materials may be
dangerous for children. Keep the
packing materials out of the reach
of children or dispose them of by
classifying them in accordance with the
waste instructions. Do not dispose them
of along with the normal household
waste.
The packing of your refrigerator is
produced from recyclable materials.
Disposing of your old
refrigerator
Dispose of your old machine without
giving any harm to the environment.
You may consult your authorized dealer
or waste collection center of your
municipality about the disposal of your
refrigerator.
Before disposing of your refrigerator,
cut out the electric plug and, if there
are any locks on the door, make them
inoperable in order to protect children
against any danger.
6.	 Front edges of the refrigerator may
feel warm. This is normal. These
areas are designed to be warm to
avoid condensation.
Electric connection
Connect your product to a grounded
socket which is being protected by a
fuse with the appropriate capacity.
Important:
The connection must be in compliance
with national regulations.
The power cable plug must be easily
accessible after installation.
Voltage and permitted fuse protection
are indicated in the “Specifications”
section.
Page: 10
EN
10
Replacing the interior light
bulb
Should the light fail to work, proceed
as follows.
1- Switch off at the socket outlet and
pull out the mains plug.
You may find it useful to remove
shelves for easy access.
2- Use a flat tipped screwdriver to
remove the light diffuser cover.
3- First check that the bulb hasn’t
worked loose by ensuring it is screwed
securely in the holder. Replace the
plug and switch on.
If the bulb works, replace the light
cover by inserting the rear lug and
pushing up to locate the front two
lugs.
4- If the light still fails to work, switch
off at the socket outlet and pull out
the mains plug. Replace the bulb with
a new 15 watt (max) screw cap (SES)
bulb.
5- Carefully dispose of the burnt-out
light bulb immediately.
Replacement light bulb can easily be
obtained from a good local electrical or
DIY store.
Page: 11
EN
11
Reversing the doors
Proceed in numerical order
1
2 3
4
7
6
9
5
8
10
11
12
13
14
16
17
18
22
23
15
20
21
19
Page: 12
EN
12
4 Using your refrigerator
Control Panel
1 2 3 7
4 5 6
Switching on for the first
time
To switch on the appliance be sure
that the plug is inserted to the mains
and the ON/OFF switch on the
thermostat box is pushed.
Insert the plug in mains socket to
switch on. The green light (5) will light
on.
The freezer temperature is pre-set to
-18°C but can be changed by the user.
In addition, the fridge temperature is
also adjusted.
Do not load with food immediately.
The display shows fridge actual
temperature up to 19°C.
The display shows freezer actual
temperature.
The appliance incorporates a
protection device in the electronics,
therefore the appliance may not
start immediately – wait for about 6
minutes.When it starts, you will then
hear the compressor and refrigerant
gas flows (You may also hear some
cracking / popping sounds which is
normal).
The set temperature will not be
reached for approximately 8 hours
and the display may fluctuate during
this period. This is not a fault. When
the correct storage temperatures have
been reached (approximately 8 hours),
you can start loading food.
When the fridge door is opened the
interior light will come on.
The front edges of the cabinet are
designed to avoid condensation and
may feel warm to the touch.
Temperature display &
adjustment
Operating temperatures are controlled
by the electronical thermostat knobs
and may be set any position between
MIN and MAX (coldest position)
a) Fridge
The display (7) shows average
temperature in fridge compartment.
The fridge temperature will display
from –5 to +19°C with respect to
internal temperature.
The average temperature inside the
fridge should be around +4°C (+41°F).
b) Freezer
The display shows the actual
average temperature in the freezer
compartment.
Page: 13
EN
13
The set temperature will not be
reached for approximately 8 hours and
the display may fluctuate during this
period. This is not a fault.
To display the currently set freezer
temperature, turn the freezer knob (2).
The new freezer set temperature will
flash (3)
Freezer temperature will display from
–30 to +30°C with respect to internal
temperature.
The average temperature inside the
freezer should be equal or colder than
-18°C (0°F)
IMPORTANT: When you changed
the freezer set temperature, with for
approximately 8 hours to allow the
freezer compartment to reach and
maintain to new setting.
Door left alarm:
If the fridge door is left open for longer
than 1 minute, an audible alarm will
sound to alert you to close the door as
soon as possible. To switch it off close
the door.
High freezer temperature
warning light (RED) (6)
If the freezer temperature becomes too
high, then the warning indicator light
(6) will flash.
If the red indicator (6) remains on more
than 12 hours, please contact with
your service agency.
Don’t worry if the red indicator light
comes on briefly. It could be due to
warm food storage or warm air in the
freezer compartment or if the freezer
door has been left open for long
periods.
Fast freeze function:
The fast freeze function enables you to
load fresh food to be frozen.
When you press fast freeze button (1),
the orange indicator light (4) will go on
and the compressor will run for about
24 hours.
To cancel, press fast freeze button
again and the orange light will go out.
Fast freeze will cancel itself
automatically after 24 hours, if you do
not cancel it manually.
The electronic control system
incorporates a safety protection
device so that if the fast freeze button
(1) is pressed more than once, the
compressor will not come on. Wait for
about 10 minutes and try again.
Self diagnostic:
Your appliance incorporates a self-
diagnostic system. Certain characters
(E0, E1, etc.) will be displayed where
the freezer temperature is usually
shown. During this time red light (6)
will flash. Please first see “trouble
shooting” section and then “Service”
section for further information.
Page: 14
EN
14
Thermostat setting button
The interior temperature of your
refrigerator changes for the following
reasons;
•	 Seasonal temperatures,
•	 Frequent opening of the door and
leaving the door open for long
periods,
•	 Food put into the refrigerator
without cooling down to the room
temperature,
•	 The location of the refrigerator in the
room (e.g. exposing to sunlight).
•	 You may adjust the varying interior
temperature due to such reasons
by using the thermostat. Numbers
around the thermostat button
indicates the cooling degrees.
•	 If the ambient temperature is higher
than 32°C, turn the thermostat button
to maximum position.
•	 If the ambient temperature is lower
than 25°C, turn the thermostat button
to minimum position.
Defrost
A) Fridge compartment
Fridge compartment performs full-
automatic defrosting. Water drops and
a frosting up to 7-8 mm can occur
on the inner rear wall of the fridge
compartment while your refrigerator
cools down. Such formation is normal
as a result of the cooling system.
The frost formation is defrosted by
performing automatic defrosting
with certain intervals thanks to the
automatic defrosting system of the rear
wall. User is not required to scrape the
frost or remove the water drops.
Water resulting from the defrosting
passes from the water collection
groove and flows into the evaporator
through the drain pipe and evaporates
here by itself.
Check regularly to see if the drain pipe
is clogged or not and clear it with the
stick in the hole when necessary.
Deep freezer compartment does not
perform automatic defrosting in order
to prevent decaying of the frozen food.
Page: 15
EN
15
B) Freezer compartment
Defrosting is very straightforward and
without mess, thanks to a special
defrost collection basin.
Defrost twice a year or when a
frost layer of around 7 (1/4”) mm
has formed. To start the defrosting
procedure, switch off the appliance
at the socket outlet and pull out the
mains plug.
All food should be wrapped in several
layers of newspaper and stored in a
cool place (e.g. fridge or larder).
Containers of warm water may be
placed carefully in the freezer to speed
up the defrosting.
Do not use pointed or sharp-edged
objects, such as knives or forks to
remove the frost.
Never use hair dryers, electrical
heaters or other such electrical
appliances for defrosting.
Sponge out the defrost water
collected in the bottom of the freezer
compartment. After defrosting, dry the
interior thoroughly.
Insert the plug into the wall socket and
switch on the electricity supply.
Zero temperature
compartment
This compartment has been designed
to store frozen food which would be
thawed slowly (meat, fish, chicken,etc.)
as required.Zero temperature
compartment is the coldest place
of your refrigerator in which dairy
products (cheese, butter), meat,
fish or chicken may be kept at ideal
storage conditions.Vegetables and/
or fruits must not be placed in this
compartment.
Page: 16
EN
16
5 Maintenance and cleaning
A	 Never use gasoline, benzene or
similar substances for cleaning
purposes.
B	 We recommend that you unplug the
appliance before cleaning.
C	 Never use any sharp abrasive
instrument, soap, household
cleaner, detergent and wax polish for
cleaning.
C	 Use lukewarm water to clean the
cabinet of your refrigerator and wipe it
dry.
C	 Use a damp cloth wrung out in
a solution of one teaspoon of
bicarbonate of soda to one pint of
water to clean the interior and wipe it
dry.
B	 Make sure that no water enters the
lamp housing and other electrical
items.
B	 If your refrigerator is not going to be
used for a long period of time, unplug
the power cable, remove all food,
clean it and leave the door ajar.
C	 Check door seals regularly to ensure
they are clean and free from food
particles.
C	 To remove door racks, remove all the
contents and then simply push the
door rack upwards from the base.
Protection of plastic
surfaces
C	 Do not put the liquid oils or oil-cooked
meals in your refrigerator in unsealed
containers as they damage the
plastic surfaces of your refrigerator. In
case of spilling or smearing oil on the
plastic surfaces, clean and rinse the
relevant part of the surface at once
with warm water.
Page: 17
EN
17
6 Recommended solutions for the problems
Please review this list before calling the service. It might save you time and
money. This list includes frequent complaints that are not arising from defective
workmanship or material usage. Some of the features described here may not
exist in your product.
The refrigerator does not operate
•	 Is the refrigerator properly plugged in? Insert the plug to the wall socket.
•	 Is the fuse of the socket which your refrigerator is connected to or the main fuse
blown out? Check the fuse.
Condensation on the side wall of the fridge compartment. (MULTI ZONE, COOL
CONTROL ve FLEXI ZONE)
•	 Very cold ambient conditions. Frequent opening and closing of the door. Highly
humid ambient conditions. Storage of food containing liquid in open containers.
Leaving the door ajar.
•	 Switching the thermostat to a colder degree.
•	 Decreasing the time the door left open or using it less frequently.
•	 Covering the food stored in open containers with a suitable material.
•	 Wipe the condensation using a dry cloth and check if it persists.
Compressor is not running
•	 Protective thermic of the compressor will blow out during sudden power failures or
plug-out plug-ins as the refrigerant pressure in the cooling system of the refrigerator
has not been balanced yet.
•	 Your refrigerator will start running approximately after 6 minutes. Please call the
service if your refrigerator does not startup at the end of this period.
•	 The fridge is in defrost cycle. This is normal for a full-automatically defrosting
refrigerator. Defrosting cycle occurs periodically.
•	 Your refrigerator is not plugged into the socket. Make sure that he plug is inserted
tightly to the wall socket.
•	 Are the temperature adjustments correctly made? There is a power failure. Call
your electricity supplier.
The fridge is running frequently or for a long time.
Page: 18
EN
18
•	 Your new refrigerator may be wider than the previous one. This is quite normal.
Large refrigerators operate for a longer period of time.
•	 The ambient room temperature may be high.This is quite normal.
•	 The refrigerator might have been plugged in recently or might have been loaded
with food. Cooling down of the refrigerator completely may last for a couple of
hours longer.
•	 Large amounts of hot food might have been put in the refrigerator recently. Hot
food causes longer running of the refrigerator until they reach the safe storage
temperature.
•	 Doors might have been opened frequently or left ajar for a long time. The warm
air that has entered into the refrigerator causes the refrigerator to run for longer
periods. Open the doors less frequently.
•	 Freezer or fridge compartment door might have been left ajar. Check if the doors
are tightly closed.
•	 The refrigerator is adjusted to a very low temperature. Adjust the refrigerator
temperature to a warmer degree and wait until the temperature is achieved.
•	 Door seal of the fridge or freezer may be soiled, worn out, broken or not properly
seated. Clean or replace the seal. Damaged/broken seal causes the refrigerator to
run for a longer period of time in order to maintain the current temperature.
Freezer temperature is very low while the fridge temperature is sufficient.
•	 The freezer temperature is adjusted to a very low temperature. Adjust the freezer
temperature to a warmer degree and check.
Fridge temperature is very low while the freezer temperature is sufficient.
•	 The fridge temperature is adjusted to a very low temperature. Adjust the fridge
temperature to a warmer degree and check.
Food kept in the fridge compartment drawers are freezing.
•	 The fridge temperature is adjusted to a very low temperature. Adjust the fridge
temperature to a warmer degree and check.
Temperature in the fridge or freezer is very high.
•	 The fridge temperature is adjusted to a very high degree. Fridge adjustment has an
effect on the temperature of the freezer. Change the temperature of the fridge or
freezer until the fridge or freezer temperature reaches to a sufficient level.
•	 The door might be left ajar. Close the door completely.
•	 Large amounts of hot food might have been put in the refrigerator recently. Wait
until the fridge or freezer reaches the desired temperature.
•	 Refrigerator might have been plugged in recently. Cooling down of the refrigerator
completely takes time because of the size.
Page: 19
EN
19
Noise similar to the sound of seconds heard from an analog clock is coming from
the refrigerator.
•	 This noise is coming from the solenoid valve of the refrigerator. Solenoid valve
functions for the purpose of ensuring coolant passage through the compartment
which can be adjusted to cooling or freezing temperatures, and performing cooling
functions. This is normal and is not fault cause.
The operation noise increases when the refrigerator is running.
•	 The operating performance characteristics o f the refrigerator may change
according to the changes in the ambient temperature. It is normal and not a fault.
Vibrations or noise.
•	 The floor is not even or it is weak. The refrigerator rocks when moved slowly. Make
sure that the floor is level, strong and capable to carry the refrigerator.
•	 The noise may be caused by the items put onto the refrigerator. Such items should
be removed from the top of the refrigerator.
There are noises like liquid spilling or spraying.
•	 Liquid and gas flows happen in accordance with the operating principles of your
refrigerator. It is normal and not a fault.
There is a noise like wind blowing.
•	 Air activators (fans) are used in order to allow the refrigerator to cool efficiently. It is
normal and not a fault.
Condensation on the inner walls of refrigerator.
•	 Hot and humid weather increases icing and condensation. It is normal and not a
fault.
•	 The doors are ajar. Make sure that the doors are closed completely.
•	 Doors might have been opened very frequently or they might have been left open
for along time. Open the door less frequently.
Humidity occurs on the outside of the refrigerator or between the doors.
•	 The weather may be humid. This is quite normal in humid weather. When the
humidity is less, condensation will disappear.
Bad odor inside the refrigerator.
•	 Inside of the refrigerator must be cleaned. Clean the inside of the refrigerator with a
sponge, warm water or carbonated water.
•	 Some containers or packaging materials might be causing the smell. Use a different
container or different brand packaging material.
The door(s) is (are) not closing.
•	 Food packages may prevent the door’s closing. Replace the packages that are
obstructing the door.
•	 The refrigerator is probably not completely vertical on the floor and it might be
rocking when slightly moved. Adjust the elevation screws.
•	 The floor is not level or strong. Make sure that the floor is level and capable to carry
the refrigerator.
Crispers are stuck.
•	 The food might be touching the ceiling of the drawer. Rearrange food in the drawer.

Question & answers

There are no questions about the Beko CBI7702 yet.

Ask a question about the Beko CBI7702

Have a question about the Beko CBI7702 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Beko CBI7702. Please make sure that you describe your difficulty with the Beko CBI7702 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.