Asus V6-M4A3000E manual

View a manual of the Asus V6-M4A3000E below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Asus
  • Product: Barbecue
  • Model/name: V6-M4A3000E
  • Filetype: PDF
  • Available languages: English

Table of Contents

Page: 1
ii CK3R and CK3X Mobile Computer User Manual
Intermec Technologies Corporation
Worldwide Headquarters
6001 36th Ave.W.
Everett, WA 98203
U.S.A.
www.intermec.com
The information contained herein is provided solely for the purpose of allowing customers to
operate and service Intermec-manufactured equipment and is not to be released, reproduced, or
used for any other purpose without written permission of Intermec Technologies Corporation.
Information and specifications contained in this document are subject to change without prior
notice and do not represent a commitment on the part of Intermec Technologies Corporation.
© 2012 by Intermec Technologies Corporation. All rights reserved.
The word Intermec, the Intermec logo, Norand, ArciTech, Beverage Routebook, CrossBar,
dcBrowser, Duratherm, EasyADC, EasyCoder, EasySet, Fingerprint, i-gistics, INCA (under license),
Intellitag, Intellitag Gen2, JANUS, LabelShop, MobileLAN, Picolink, Ready-to-Work, RoutePower,
Sabre, ScanPlus, ShopScan, Smart Mobile Computing, SmartSystems, TE 2000, Trakker Antares,
and Vista Powered are either trademarks or registered trademarks of Intermec Technologies
Corporation.
There are U.S. and foreign patents as well as U.S. and foreign patents pending.
Wi-Fi is a registered certification mark of the Wi-Fi Alliance.
Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation
in the United States and/or other countries.
Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A.
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit
(www.openssl.org).
This product includes cryptographic software written by Eric Young (EAY@cryptsoft.com).
This product uses Regex++, Index software during its operational phases. The owner of Regex++
has granted use of the software to anyone provided such use is accompanied by the following
copyright and permission notice:
Regex++, Index. (Version 3.31, 16th Dec 2001)
Copyright © 1998-2001 Dr John Maddock
Permission to use, copy, modify, distribute and sell this software and its documentation for any
purpose is hereby granted without fee, provided that the above copyright notice appear in all
copies and that both that copyright notice and this permission notice appear in supporting
documentation. Dr John Maddock makes no representations about the suitability of this software
for any purpose. It is provided "as is" without express or implied warranty.
iTalkie is a trademark of TABLETmedia, Inc.
Page: 2
Contents
CK3R and CK3X Mobile Computer User Manual iii
Contents
Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Global Services and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Warranty Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Web Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Send Feedback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Telephone Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Who Should Read This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
Patent Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
1 About the Computer Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
About the CK3R and CK3X Mobile Computers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
About Language Provisioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
About the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Charge the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Battery Charge Times . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Change the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
About Battery Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
About Battery Life and Conservation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
About the Status LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
About the Keypad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
About the Color-Coded Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
How to Capitalize Characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
About the Power Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
About the Screen Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Configure the Screen Backlight Timeout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Configure the Screen Backlight Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
About the Audio Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Adjust the Speaker Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
About the Push-to-Talk Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Record Audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Use the Computer as a Two-Way Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Page: 3
Contents
iv CK3R and CK3X Mobile Computer User Manual
How to Read Bar Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Read Bar Codes with the Imager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Connect a Bluetooth Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Connect a Tethered Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Insert a microSD Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
How to Transfer Files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Set Up the Computer as a Mass Storage Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
CK3 Options and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
2 About the User Interface and Intermec Applications. . . . . . . . . . 29
About the User Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
About the Home Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
About Screen Gestures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Title Bar Status Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Calibrate the Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
About Intermec Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Intermec Applications on the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Downloadable Intermec Applications for the Computer. . . . . . . . . . . . . . . . . . . . .36
About Features Demo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
About Intermec Browser. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
About Intermec HTML5 Browser. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
About Intermec Launcher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
About Intermec Terminal Emulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
About SmartSystems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
3 Configure the Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
How to Configure the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
About Intermec Settings on the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Start Intermec Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
About the Structure of Intermec Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
How to Navigate in Intermec Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Enable Intermec Settings Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Restore Default Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Configure the Computer Remotely with SmartSystems . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Page: 4
Contents
CK3R and CK3X Mobile Computer User Manual v
About Network Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Configure 802.11 Radio Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
About Bluetooth Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Turn On the Bluetooth Radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Connect a Bluetooth Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Create a Configuration Bar Code with EasySet . . . . . . . . . . . . . . . . . . . . .51
Connect to a Bluetooth Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Connect a Bluetooth Audio Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Connect to a Wireless Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
About Serial and USB Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
About Wireless Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Load a Certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
How to Make Your Security Choice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Select a Funk Security Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Configure WPA or WPA2 Enterprise (802.1x) Security with
Funk Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Configure WPA or WPA2 Personal (PSK) Security with Funk
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Configure 802.1x Security with Funk Security . . . . . . . . . . . . . . . . . . . . . .60
Configure LEAP Security with Funk Security. . . . . . . . . . . . . . . . . . . . . . .61
Configure Static WEP Security with Funk Security. . . . . . . . . . . . . . . . . .61
Use Open (No Security) Associations with Funk Security . . . . . . . . . . . .62
Select Microsoft as Your Security Choice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Configure WPA or WPA2 Enterprise (802.1x) Security with
Microsoft Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Configure WPA or WPA2 Personal (PSK) Security with Microsoft
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Configure 802.1x Security with Microsoft Security. . . . . . . . . . . . . . . . . .64
Configure Static WEP Security with Microsoft Security . . . . . . . . . . . . .65
Use Open (No Security) Associations with Microsoft Security. . . . . . . .65
4 Manage the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
About Managing the Computer in Your Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
How to Manage the Computer Using CloneNGo . . . . . . . . . . . . . . . . . . . . . . . . . . .68
How to Manage the Computer Using SmartSystems . . . . . . . . . . . . . . . . . . . . . . . .68
How to Manage the Computer Using Third-Party Software. . . . . . . . . . . . . . . . . .69
How to Develop and Install Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
About Packaging Your Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Install Applications Using SmartSystems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
Install Applications Using Microsoft Synchronization Software. . . . . . . . . . . . . .71
Install Applications Using an SD Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
How to Launch Applications Automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Page: 5
Contents
vi CK3R and CK3X Mobile Computer User Manual
How to Update the System Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Update Computers Using SmartSystems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Update the Computer Using a microSD Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
5 Troubleshoot and Maintain the Computer . . . . . . . . . . . . . . . . . . 75
About the Intermec Dashboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
About Troubleshooting the Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Wi-Fi Connection Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Check Wi-Fi Network Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
802.1x Security Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
Troubleshoot the Scanner with Scan Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Problems Reading Bar Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Problems Using the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Call Product Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Locate Your Configuration Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Locate Your Operating System Version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
How to Restart the Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Reboot the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Cold Boot the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Clean Boot the Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Clean the Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
A Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Physical and Environmental Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90
EA31 Typical Reading Distances - Extended Reading Range . . . . . . . . . . . . . . . . .93
EA31 Imager Minimum Reading Distances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94
EA31 Imager Typical Reading Distances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
EA30 Typical Reading Distances - Extended Reading Range . . . . . . . . . . . . . . . . .97
EA30 Area Imager Minimum Reading Distances. . . . . . . . . . . . . . . . . . . . . . . . . . . .98
EA30 Imager Typical Reading Distances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
EX25C Near-Far Range Area Imager Reading Distance . . . . . . . . . . . . . . . . . . . . .100
Page: 6
Contents
CK3R and CK3X Mobile Computer User Manual vii
B Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Default Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
Data Collection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
RFID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Device Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
Core Messaging Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
Device Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Virtual Wedge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Location Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
C Keypads and Keystrokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Characters and Functions on Keypads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
Page: 7
Contents
viii CK3R and CK3X Mobile Computer User Manual
Page: 8
Before You Begin
CK3R and CK3X Mobile Computer User Manual ix
Before You Begin
This section provides you with safety information, technical support
information, and sources for additional product information.
Safety Information
Your safety is extremely important. Read and follow all warnings and
cautions in this document before handling and operating Intermec
equipment. You can be seriously injured, and equipment and data can
be damaged if you do not follow the safety warnings and cautions.
This section explains how to identify and understand warnings,
cautions, and notes that are in this document.
Global Services and Support
Warranty Information
To understand the warranty for your Intermec product, visit the
Intermec website at www.intermec.com and click Support >
Returns and Repairs > Warranty.
A warning alerts you of an operating procedure, practice,
condition, or statement that must be strictly observed to avoid
death or serious injury to the persons working on the equipment.
A caution alerts you to an operating procedure, practice,
condition, or statement that must be strictly observed to prevent
equipment damage or destruction, or corruption or loss of data.
Note: Notes either provide extra information about a topic or contain
special instructions for handling a particular condition or set of
circumstances.
Page: 9
Before You Begin
x CK3R and CK3X Mobile Computer User Manual
Disclaimer of warranties: The sample code included in this document
is presented for reference only. The code does not necessarily
represent complete, tested programs. The code is provided “as is with
all faults.” All warranties are expressly disclaimed, including the
implied warranties of merchantability and fitness for a particular
purpose.
Web Support
Visit the Intermec website at www.intermec.com to download our
current manuals (in PDF).
Visit the Intermec technical knowledge base (Knowledge Central) at
www.intermec.com and click Support > Knowledge Central to
review technical information or to request technical support for your
Intermec product.
Send Feedback
Your feedback is crucial to the continual improvement of our
documentation. To provide feedback about this manual, please
contact the Intermec Technical Communications department directly
at TechnicalCommunications@intermec.com.
Telephone Support
In the U.S.A. and Canada, call 1-800-755-5505.
Outside the U.S.A. and Canada, contact your local Intermec
representative. To search for your local representative, from the
Intermec website, click About Us > Contact Us.
Who Should Read This Manual
This manual is for the person who is responsible for installing,
configuring, and maintaining the CK3R and CK3X mobile computer.
This manual provides you with information about the features of the
computer, and how to install, configure, operate, maintain, and
troubleshoot it.
Before you work with the CK3R or CK3X, you should be familiar with
your network and general networking terms, such as IP address.
Page: 10
Before You Begin
CK3R and CK3X Mobile Computer User Manual xi
Related Documents
Here are some related Intermec documents you might find useful:
• Intermec Settings Command Reference Manual
• Intermec Developer Library (IDL) Resource Kit Developer’s Guide
The Intermec website at www.intermec.com contains our documents
(as .pdf files) that you can download for free.
To download documents
1 Visit the Intermec website at www.intermec.com.
2 Click the Products tab.
3 Using the Products menu, navigate to your product page. For
example, to find the CK3X computer product page, click
Computers > Handheld Computers > CK3X.
4 Click the Manuals tab.
If your product does not have its own product page, click Support >
Manuals. Use the Product Category, the Product Family, and
Product to find your documentation.
Patent Information
Product is covered by one or more of the following patents:
4953113; 4961043; 4970379; 4988852; 5019699; 5021642; 5038024;
5081343; 5095197; 5144119; 5144121; 5182441; 5187355; 5187356;
5195183; 5216233; 5216550; 5218191; 5227614; 5233172; 5241488;
5243602; 5258606; 5278487; 5288985; 5308966; 5322991; 5331136;
5331580; 5342210; 5349678; 5359185; 5371858; 5373458; 5389770;
5397885; 5410141; 5414251; 5416463; 5442167; 5464972; 5468947;
5468950; 5477044; 5486689; 5488575; 5500516; 5502297; 5504367;
5508599; 5514858; 5530619; 5534684; 5536924; 5539191; 5541419;
5548108; 5550362; 5550364; 5565669; 5567925; 5568645; 5572007;
5576529; 5592512; 5594230; 5598007; 5608578; 5616909; 5619027;
5627360; 5640001; 5657317; 5659431; 5671436; 5672860; 5684290;
5719678; 5729003; 5742041; 5761219; 5764798; 5777308; 5777309;
5777310; 5786583; 5793604; 5798509; 5798513; 5804805; 5805807;
5811776; 5811777; 5818027; 5821523; 5828052; 5831819; 5834749;
5834753; 5837987; 5841121; 5842070; 5844222; 5854478; 5862267;
Page: 11
Before You Begin
xii CK3R and CK3X Mobile Computer User Manual
5869840; 5873070; 5877486; 5878395; 5883492; 5883493; 5886338;
5889386; 5892971; 5895906; 5898162; 5902987; 5902988; 5912452;
5923022; 5936224; 5949056; 5969321; 5969326; 5969328; 5979768;
5986435; 5987192; 5987499; 5992750; 6003775; 6012640; 6016960;
6018597; 6024289; 6034379; 6036093; 6039252; 6064763; 6075340;
6095422; 6097839; 6102289; 6102295; 6109528; 6119941; 6128414;
6138915; 6149061; 6149063; 6152370; 6155490; 6158661; 6164542;
6164545; 6173893; 6195053; 6234393; 6234395; 6244512; 6249008;
6328214; 6330975; 6345765; 6356949; 6367699; 6375075; 6375076;
6375344; 6431451; 6435411; 6484944; 6488209; 6497368; 6532152;
6538413; 6539422; 6621942; 6641046; 6681994; 6687403; 6688523;
6732930; 6859190; 6889903; 6967280; 7027037; 7035466; 7090137;
7121467.
Docking station or device: 5052943; 5195183; 5317691; 5331580;
5544010; 5644471.
There may be other U.S. and foreign patents pending.
Page: 12
1
1
About the Computer Features
This Chapter introduces the CK3R and CK3X Mobile
Computers with Windows® Embedded Handheld operating
system. Use this chapter to learn about the basic features and
functions of each computer, as well as the available accessories
for it.
Page: 13
Chapter 1 — About the Computer Features
2 CK3R and CK3X Mobile Computer User Manual
About the CK3R and CK3X Mobile Computers
The Intermec CK3R and CK3X Mobile Computers are ergonomically
designed mobile computers built on the Microsoft® Windows®
Embedded Handheld 6.5 operating system. The computers are
lightweight, easy-to-use, and run most software designed for the
Windows Embedded platform. In this manual, computer refers to
models CK3R, CK3X, and CK3XNI, unless specifically stated.
CK3 Mobile Computer Features
Callout Description
1 Power button
2 Scan button
3 Status LEDs
4 Ambient light sensor
5 Tethered stylus
6 Docking connector






Page: 14
Chapter 1 — About the Computer Features
CK3R and CK3X Mobile Computer User Manual 3
This table shows some of the key differences between the CK3R and
CK3X:
About Language Provisioning
You are prompted to select a language provision when the computer
starts for the first time. It may take up to 15 minutes to load your
language. Once loaded, your selected language will persist through all
boot scenarios (warm, cold, or clean).
Make sure you select the correct language before you tap Provision. If
you need change the language provisioning, you need to reinstall the
operating system and restart the computer. When the computer starts
again, select your new language.
The CK3R Mobile Computer with a DHIB 802.11b/g/n radio
installed is Wi-Fi® certified for interoperability with other
802.11b/g/n wireless LAN devices.
The CK3X Mobile Computer with a DDIB 802.11a/b/g/n radio
installed is Wi-Fi® certified for interoperability with other
802.11a/b/g/n wireless LAN devices.
Compare the CK3R and CK3X
Feature CK3R CK3X
Flash 512 MB 1 G
RAM 256 MB 256 MB
Accelerometer No Yes
802.11 Radio b/g/n a/b/g/n
Alphanumeric or Numeric Keypad Yes Yes
Microphone No Yes
Imager EA31 EA30, EX25
Page: 15
Chapter 1 — About the Computer Features
4 CK3R and CK3X Mobile Computer User Manual
About the Battery
The computer uses one of these rechargeable Lithium-ion battery
packs as its main power source.
You can use the battery status icon in the Title bar or the Intermec
Dashboard to view the charging status of your battery.
The optional 5200 mAH battery provides higher performance with less
power, improves cold temperature operation, and provides remote
health monitoring if you are using SmartSystems.
Charge the Battery
Make sure you fully charge the battery before you use your computer.
You can charge the battery before or after you install it in the
computer. A fully discharged battery charges in approximately 4
(AB17) to 7 (AB18, 1001AB01/1001AB02) hours.
• Insert the battery into the battery bay of the AD20 single dock
(AB17 or AB18 only), insert up to four batteries into the AC20 quad
battery charger (AB17 or AB18 only), or insert batteries into the
FlexDock battery cup 1002UC02 with the DX2 or DX4.
Or,
• Install the battery in the CK3 and insert the CK3 into the AD20
single dock, AD21 Ethernet multidock, AD22 charge-only
multidock, Universal Wall Mount Charger, or AV10 vehicle dock.
Warning: The battery used in this device may present a fire or
chemical burn hazard if it is mistreated. Do not disassemble it,
heat it above 100 ºC (212 ºF) or incinerate it. Dispose of used
batteries promptly. Keep away from children.
CK3R/CK3X Battery Packs
Battery Model Description Ships With
AB17 2000 mAH (7.4 Wh) battery CK3R
AB18 5100 mAH (18.5 Wh) battery CK3X
1001AB01/100
1AB02
5200 mAH (19.2 Wh) battery, includes battery
health monitoring
Page: 16
Chapter 1 — About the Computer Features
CK3R and CK3X Mobile Computer User Manual 5
Battery Charge Times
Charge times for the batteries depend on the battery and the charging
method.
Change the Battery
Before you change the battery, you need to put the computer in
Hibernate (battery swap) mode. Hibernate mode turns off the radios
on the computer.
1 Save your files and close any open applications.
2 Press and hold the Power button for about 2 seconds until the
Intermec Power Options screen appears.
3 From the Intermec Power Options screen, select Hibernate.
4 If necessary, disconnect the handstrap from the bottom of the
computer.
Battery Charge Times
CK3 Charging Accessory
AB17 Charge
TImes
AB18 Charge
TImes
1001AB01/1001
AB02 Charge
Times
AC20 quad charger up to 4 hours up to 6 hours
AD20 single dock up to 4 hours up to 6 or 7
hours
up to 6 hours
(batterymustbe
inserted in
computer)
AD21 Ethernet
multidock
up to 4 hours up to 7 hours up to 6 hours
AD22 charge-only
multidock
up to 4 hours up to 7 hours up to 6 hours
AV10 vehicle dock up to 4 hours up to 7 hours up to 6 hours
DX2 or DX4 with
FlexDock cup 1002UC02
up to 4 hours up to 7 hours up to 6 hours
Universal wall mount
charger
up to 4 hours up to 6 hours up to 6 hours
Page: 17
Chapter 1 — About the Computer Features
6 CK3R and CK3X Mobile Computer User Manual
5 Press the battery release tab toward the battery until the battery is
released, and then remove the battery.
6 Insert the top end of a fully charged battery into the computer and
press down firmly on the bottom of the battery. The battery release
tab makes a clicking sound when the battery is completely
installed.
About Battery Status
Use the battery icon on the Title bar to view the power status of the
battery.
The Battery status LED below the computer screen indicates the
charging status of the battery.
Battery Status Icons
Icon Status
Battery is fully charged.
Battery has medium charge.
Battery is low. You need to replace the battery soon.
Battery is critically low. You need to replace the battery now.
Battery is charging.
Page: 18
Chapter 1 — About the Computer Features
CK3R and CK3X Mobile Computer User Manual 7
Battery LED States
LED State Description
Steady green The computer is connected to a charger and the
battery is more than 95% charged.
Blinking red The battery is very low. The computer will soon go
into Suspend mode. Charge or replace the battery.
Steady red The computer is connected to a charger and the
battery is charging.
Amber There is a battery error. The battery is not charging
because it is missing, faulty, or outside the allowable
charging temperature range. If it is outside the
charging temperature range, charging will resume
when the battery temperature returns to the
acceptable range of 5 °C to 35 °C (41 °F to 95 °F).
Off The computer is not on external power and the battery
is operating normally.
#BUUFSZTUBUVT-&%
Page: 19
Chapter 1 — About the Computer Features
8 CK3R and CK3X Mobile Computer User Manual
About Battery Life and Conservation
Batteries that are stored outside the computer for long periods of time
slowly discharge. Intermec recommends storing the battery in a
charger to maintain battery performance.
Battery Conservation Tips
When You Want to: Do this to Save Battery Power:
Use the computer and the low
battery status icon appears or the
battery light turns on.
Connect the computer to an external
power source. Save your data, press the
Power button, and select Hibernate .
After the computer turns off, remove the
battery and insert a fully charged battery.
Stop using the computer for 5
minutes or longer.
Make sure that the low batterystatus icon
is not on the screen and the battery status
LED is not on. Press the Power button
and select Suspend to suspend the
computer. If you have a CK3X, the
accelerometer lets you lay the computer
face down and it will automatically
suspend.
Store the computer for more than
a day.
• If you are storing the computer for a
few days, like over the weekend, install
a charged battery or connect the
computer to a power source.
• If you are storing the computer for
longer, remove and charge the battery,
and then store both the battery and
computer in a cool location.
• If you store the battery for several
months, recharge the battery to keep it
at peak performance.
Store the battery outside the
computer.
Store the battery in a charger.
Page: 20
Chapter 1 — About the Computer Features
CK3R and CK3X Mobile Computer User Manual 9
About the Status LEDs
The status LEDs turn on, turn off, or blink to indicate a specific
activity on your computer.
Location of Main Status LEDs
Main Status LED Descriptions
Callout LED Color Description
1 Notification Orange Windows Mobile 6.5 notification.
2 Good Read Green Good read of a bar code.
Blinking
red
Bad read of a bar code.
Blinking
green
The data collection engine is
processing or starting up.
  
Page: 21
Chapter 1 — About the Computer Features
10 CK3R and CK3X Mobile Computer User Manual
2 Intermec
Ready-to-Work™
indicator
Blue If Intermec Terminal Emulator (ITE)
is installed, the application is
running and is connected to the host.
If you do not have ITE, you can
configure the Ready-to-Work
indicator to turn on or off to indicate
a healthy state.
Blinking
blue
ITE is running but not connected to
the host. The computer is unhealthy.
Off ITE is not installed or not running.
The computer is healthy.
3 Battery status Steady
green
The computer is connected to a
charger and the battery is more than
95% charged.
Steady red The computer is connected to a
charger and the battery is charging.
Blinking
red
The battery is very low, and the
computer will go into Suspend mode
soon. Charge or replace the battery.
Amber There is a battery error. The battery is
not charging because it is missing,
faulty, or outside the allowable
charging temperature range. If it is
outside the charging temperature
range, charging will resume when the
battery temperature returns to the
acceptable range of 5 °C to 35 °C
(41 °F to 95 °F).
Off The computer is not on external
power and the battery is operating
normally.
Main Status LED Descriptions (Continued)
Callout LED Color Description
Page: 22
Chapter 1 — About the Computer Features
CK3R and CK3X Mobile Computer User Manual 11
Location of Orange and Green Key LEDs
Orange and Green Key Status LEDs
Callout LED Color Description
4 Orange key status Orange The Orange key is enabled.
5 Green key status Green The Green key is enabled.


Page: 23
Chapter 1 — About the Computer Features
12 CK3R and CK3X Mobile Computer User Manual
About the Keypad
The computer comes with either an alphanumeric keypad or a
numeric keypad. In low light conditions, an ambient light sensor
automatically turns on the keypad backlight. To conserve power, you
can disable the keypad backlight. The CK3R keypads do not have the
PTT key.
Alphanumeric Keypad
Page: 24
Chapter 1 — About the Computer Features
CK3R and CK3X Mobile Computer User Manual 13
Numeric Keypad
About the Color-Coded Keys
Use the orange key and the green key to access additional
characters, symbols, and functions printed on the keypad overlay.
After you understand how to use the color-coded keys and key
sequences, you can access all of the additional features printed on the
keypad overlay.
The default setting for the Green/Orange keys is Press once to lock.
You can also set the keys to Press twice to lock if you do not want the
Green/Orange keys to lock after pressing them one time. The
information in this section assumes that you are using the default
setting for the Green/Orange keys lock options. To change the setting
for the Green/Orange keys, go to Start > Settings > System >
Intermec Settings > Device Settings > Keypad.
Page: 25
Chapter 1 — About the Computer Features
14 CK3R and CK3X Mobile Computer User Manual
How to Capitalize Characters
You can capitalize characters individually, or you can enable Caps Lock
to type all capital letters.
To capitalize a single character
• On the alphanumeric keypad, press the key, and then the key
to select the Shift function.
• On the numeric keypad, press the key, and then the key to
select the Shift function.
To enable Caps Lock
• On the alphanumeric keypad, press the key, and then the key.
• On the numeric keypad, press the key, and then the .key.
To disable Caps Lock
• When in Caps Lock mode, press key to disable Caps Lock.
How to Use the Color-Coded Keys
You Want to Press Example
Use an orange
character or function
printed above a key.
key (LED turns on),
and then the key with the
character or function
printed above it (LED
stays on).
On the alphanumeric
keypad, press then
to open the device health
dashboard.
Use a green character
or function printed
above a key.
key (LED turns on),
and then the key with the
character or function
printed above it (LED
stays on).
On the alphanumeric
keypad, press and
then to select the ok
function.
Unlock the green or
orange key.
or once. Press or once to
unlock the key. The LED
turns off.
$

!
"
Page: 26
Chapter 1 — About the Computer Features
CK3R and CK3X Mobile Computer User Manual 15
About the Power Button
When you press the Power button for about 2 seconds and hold it, the
Intermec Power Options screen appears with a list of power options. If
you do not select a power options setting, the currently selected action
(the button outlined in bold) occurs after the timeout. Hibernate does
not appear as an option if the computer is connected to external
power.
The Intermec Power Options Default Screen
Use the next table to understand the Intermec Power Options and
what settings are available for your computer.
Page: 27
Chapter 1 — About the Computer Features
16 CK3R and CK3X Mobile Computer User Manual
If you are using WPA or 802.1x security, the computer may need to
reauthenticate before it resumes your application. The Real Time
Clock (RTC) will persist through all of the power options as long as it
receives power from the Real Time Clock battery.
The Intermec Power Options screen is customizable. You can use
Intermec Settings to determine which options are available to end
users, the timeout until the default choice is selected, the default
action if no option is selected, or to disable the Power Options Screen.
Intermec Power Options
Option Description
Hibernate (battery swap) High power saving mode. The computer
saves the current system state, registry,
and file system and then powers off all
radios and internal devices. You can wake
the computer by pressing the Power
button or connecting the computer to
external power.
Suspend Medium power saving mode. The
computer powers off all radios and
internal devices not involved in saving the
system state. You can wake the computer
by pressing the Power button, pulling the
scanner trigger, scheduling an event such
as an alarm, or by connecting the
computer to external power.
Reboot The computer does not save the current
system state, but the registry and file
systems are saved. The computer shuts
down all running processes and restarts.
Cancel Cancels the Intermec Power Options
menu.
Screen Off Lowest power saving mode. The screen
turns off, but the radios and internal
devices stay on. Tap the screen to turn it
back on.
Shutdown Very high power saving mode. The
computer turns off everything. You must
press Power or apply external power to
restart the computer.
Page: 28
Chapter 1 — About the Computer Features
CK3R and CK3X Mobile Computer User Manual 17
About the Screen Backlight
The computer has an ambient light sensor that automatically adjusts
the brightness of the screen backlight to ensure that the screen is
readable, while conserving power. By default, the screen turns off when
there is no activity on the computer. To resume activity, press a key or
tap the screen.
You can configure the brightness and the timeout of the screen
backlight.
Configure the Screen Backlight Timeout
Use the Start menu to configure the timeout for the screen backlight.
The Power option settings shown below suspend the device after a
specific amount of time. To actually turn off the screen, go to Start >
Settings > System > Intermec Settings > Device Settings > Power
Management > Battery Power > Screen turns off after.
1 Tap Start > Settings > Power.
2 Tap Advanced on the horizontal scroll bar.
3 Select the screen power off settings that you want the computer to
use when it is on battery power or external power.
4 Tap OK.
Page: 29
Chapter 1 — About the Computer Features
18 CK3R and CK3X Mobile Computer User Manual
Configure the Screen Backlight Brightness
Use Intermec Settings to configure the brightness of the screen
backlight.
1 Tap Start > Settings > System > Intermec Settings.
2 Tap Device Settings > Backlight > Display.
3 Select how bright you want the backlight to be in normal, low, and
bright light conditions.
4 Tap OK and exit Intermec Settings.
About the Audio Features
Your mobile computer has a speaker, a microphone (CK3X only), and
several software tools for configuring the volume of sounds.
Adjust the Speaker Volume
The computer volume includes sounds you hear when you tap the
screen or scan bar codes with a scanner.
1 Tap the Title bar at the top of the screen.
2 Tap the Volume icon .
3 Use your stylus to adjust the volume slider.
4 Tap OK.
About the Push-to-Talk Feature
You can use the Push-to-Talk (PTT) feature on the CK3X to:
• record audio on your computer.
• use your computer as a two-way radio.
Record Audio
Use the Push-to-Talk (PTT) key to record audio on your computer.
1 If your computer is in suspend mode, press the PTT key to turn on
the computer.
Page: 30
Chapter 1 — About the Computer Features
CK3R and CK3X Mobile Computer User Manual 19
2 Press the PTT key to start the Notes application in audio note
mode, and then tap the Record button to start recording.
Or, press and hold the PTT key to start the Notes application in
audio note mode and start recording.
3 To stop recording, release the PTT key.
Use the Computer as a Two-Way Radio
Use the Push To Talk (PTT) feature with an audio application, such as
iTalkie™, to communicate with other computers over the 802.11 radio
network. For more information about the iTalkie application, go to
www.tabletmedia.com/iTalkie.html.
• After you install an audio application, press and hold the PTT key
to talk to another computer.
How to Read Bar Codes
The computer has an internal imager that can read 1D and 2D bar
code symbologies, composite symbologies, and postal codes:
• The CK3R computer has an EA31 area imager.
• The CK3X computer has either an EA30 area imager or an EX25
near-far range area imager.
You can also connect the computer to these external scanners:
• Cordless scanners, such as the SF51, SG20, and SR61, using
Bluetooth communications
• Tethered scanners, such as the SG10, SG20, SR30, and the SR61,
using a CK3 RS-232 adapter (Model AA21)
Read Bar Codes with the Imager
All of the imagers have an aiming beam to help you correctly frame bar
codes and they support omni-directional (360°) scanning.
Before you start reading bar codes, use Intermec Settings to:
• enable only the bar code symbologies that you need.
• choose the predefined imager mode that best suits your
environment.
Page: 31
Chapter 1 — About the Computer Features
20 CK3R and CK3X Mobile Computer User Manual
1 Point the imager window at the bar code and hold the computer
steady a few inches from the label.
2 Press the Scan button or pull the scan handle trigger. The
illumination beam, laser pointer, or frame appear.
For near or close-in scanning distances of 30 cm (11.8 in) or less,
use the laser pointer as a guide and aim slightly to the right of the
center of the bar code. Make sure the illumination beam covers the
bar code you are trying to decode.
For standard and long range scanning distances of 30 cm (11.8 in)
or more, use the laser pointer as a guide and aim toward the middle
of the bar code. Make sure that the illumination beam covers the
bar code you are trying to decode.
Predefined Mode For Scanning
1D Only 1D labels.
1D and 2D Standard (Default) All types of bar code labels.
1D and 2D Bright Environment In high ambient light, such as outdoors
in sunshine.
1D and 2D Reflective Surface Glossy Labels.
Page: 32
Chapter 1 — About the Computer Features
CK3R and CK3X Mobile Computer User Manual 21
When the imager successfully reads a bar code label, you hear a
high beep, and the Good Read LED turns on briefly.
3 Release the Scan button or trigger.
Connect a Bluetooth Scanner
You can connect the computer to an Intermec Bluetooth scanner, such
as the SF51, SG20, or SR61. Make sure that the Bluetooth radio in the
computer is turned on before you try to connect to a scanner.
1 Tap Start > Settings > System > Wireless Scanning.
2 Tap Add Device.
3 Select Quick Connect, Search, or Manual. Follow the
instructions on the screen to add a wireless scanner.
Page: 33
Chapter 1 — About the Computer Features
22 CK3R and CK3X Mobile Computer User Manual
Connect a Tethered Scanner
To connect a tethered scanner to your computer, use a CK3 RS-232
Adapter (Model AA21) and scanner RS-232 interface cable. For more
information, contact your local Intermec representative.
1 Connect the CK3 RS-232 adapter to the tethered scanner using the
scanner RS-232 interface cable.
2 Connect the adapter to the CK3. For help, see the CK3 Series
RS-232 Snap-On Adapter (AA21) Instructions.
3 Tap Start > Settings > System > Intermec Settings > Data
Collection > Tethered Scanner to configure the settings for the
tethered scanner.
Insert a microSD Card
Insert a micro Secure Digital (SD) card to increase file storage and
install software. The mobile computer supports microSD cards that
hold up to 32 GB of information. The microSD card slot is located in
the battery compartment.
1 Press the Power button to turn off the computer.
2 Remove the handstrap and the battery.
Page: 34
Chapter 1 — About the Computer Features
CK3R and CK3X Mobile Computer User Manual 23
3 Open the card cover door.
4 Slide the microSD card cover towards the OPEN position and lift
the cover.
Page: 35
Chapter 1 — About the Computer Features
24 CK3R and CK3X Mobile Computer User Manual
5 Insert the microSD card.
6 Close the microSD card cover and slide it towards the LOCK
position.
7 Close the card cover.
8 Use the stylus to press the Reset button in the battery
compartment.
Page: 36
Chapter 1 — About the Computer Features
CK3R and CK3X Mobile Computer User Manual 25
9 Install the battery. Press down firmly on the bottom of the battery,
and make sure that the battery release tab is fully engaged.
10 Attach the handstrap.
11 Press the Power button. The computer cold boots.
How to Transfer Files
To transfer files you need to physically connect your mobile computer
to your PC and install either Microsoft ActiveSync (Windows XP or
earlier) or Windows Mobile Device Center (Windows Vista or Windows
7) on your PC. ActiveSync and Windows Mobile Device Center are free
applications available from the Microsoft website at
www.microsoft.com/downloads.
Use one of these accessories to connect your mobile computer to your
PC:
• AD20 single dock
• USB cable (P/N 236-297-001)
Set Up the Computer as a Mass Storage Device
Use the computer as a mass storage device so you can easily copy files
to and from the mobile computer and your desktop PC.
1 Go to www.datalight.com and download the Reliance Nitro
Windows Driver (RNWD).
2 Connect the mobile computer to your desktop PC using a USB
cable.
3 On the mobile computer, tap Start > Settings > System >
Intermec Settings.
4 Tap Device Settings > USB.
5 From the USB function driver menu, select Mass storage - Flash
File Store and tap OK.
6 Copy files to and from your desktop PC to the mobile computer.
Page: 37
Chapter 1 — About the Computer Features
26 CK3R and CK3X Mobile Computer User Manual
CK3 Options and Accessories
You can use these accessories (sold and ordered separately) with the
CK3. To order accessories, contact your local Intermec sales
representative.
CK3 Options and Accessories
Accessory Description
Battery (AB17, AB18,
1001AB01, 1001AB02)
The AB17 standard battery, the AB18
extended battery, and the
1001AB01/1001AB02 smart battery,
provide main power to the CK3.
Quad Charger (AC20) The AC20 quad charger charges up to four
AB17 or AB18 batteries at one time.
Single Dock (AD20) The AD20 single dock powers your CK3
Mobile Computer and charges a spare
battery (AB17 or AB18) separately. The
single dock also provides client and host
USB connectivity.
Ethernet Multidock (AD21) The AD21 Ethernet multidock provides
Ethernet connectivity and power to up to
four CK3 computers at one time.
Charge-Only Multidock
(AD22)
The AD22 charge-only multidock charges
up to four CK3 computers at one time.
Vehicle Dock (AV10) Use the AV10 vehicle dock to hold and
charge your CK3 while you are using it on a
vehicle.
Vehicle Battery Adapter (AE33) Use the AE33 vehicle battery adapter to
provide power to your CK3 from your
vehicle. To use the vehicle battery adapter,
you also need the AA23 power adapter.
FlexDock battery cup
1002UC02 with the DX2 or
DX4
Use the DX2 or DX4 FlexDock with battery
cup 1002UC02 to charge any of the
supported CK3 batteries.
RS-232 Snap-On Adapter
(AA21)
Use the RS-232 adapter to connect RS-232
devices to your CK3.
Power Snap-On Adapter (AA23) Use the power adapter to provide power to
your CK3 from an external power supply.
Page: 38
Chapter 1 — About the Computer Features
CK3R and CK3X Mobile Computer User Manual 27
Scan Handle The scan handle provides you with an
alternate way to hold the CK3 and scan bar
code labels using a convenient scanning
trigger.
Vehicle Holder Use the vehicle holder to store your CK3
when you are not using it.
Holster The holster provides you with a convenient
way to carry your CK3 when you are not
using it. There are holsters for a CK3 with a
handle or without a handle.
IP30 and SR61 Battery Pack
Adapter
The IP30 and SR61 battery pack adapter
lets you charge an AB3 battery using the
CK3 quad charger (AC20) or CK3 single
dock (AD20).
CK3 With IP30 Vehicle Holder If you attached an IP30 to your CK3, you
can use the vehicle holder to store your CK3
when you are not using it.
Universal Wall Mount Charger
Kit
Provides interchangeable country plugs to
connect power to the computer for
charging. Includes the USB charging cable
(P/N 236-297-001).
Protective Boot A rubber boot to protects the computer
from damage.
Ethernet Adapter Model
1004UA01 (need the AD20)
Use the Ethernet adapter model 1004UA01
with the AD20 single dock to provide an
Ethernet connection for the computer.
Modem Adapter Model
1004UA02 (need the AD20)
Use the modem adapter model 1004UA02
with the AD20 single dock to provide a
modem connection for the computer.
USB Charging Cable (P/N
236-297-001)
Use the USB charging cable to connect your
computer to the desktop using ActiveSync
or to directly charge the computer.
CK3 Options and Accessories (Continued)
Accessory Description
Page: 39
Chapter 1 — About the Computer Features
28 CK3R and CK3X Mobile Computer User Manual
Page: 40
29
2
About the User Interface and Intermec
Applications
Use this chapter to learn about the Windows Embedded
Handheld user interface and how to interact with the screen.
You can also use this chapter to learn about the Intermec
applications on your computer, as well as additional
applications you can download.
Page: 41
Chapter 2 — About the User Interface and Intermec Applications
30 CK3R and CK3X Mobile Comptuer User Manual
About the User Interface
The Windows Embedded Handheld 6.5 operating system provides a
touch-friendly and easy to navigate user interface.
About the Home Screen
When you turn on your mobile computer, the Home screen is the first
screen that appears after language provisioning is complete.
The Windows Embedded Handheld 6.5 Home Screen
Home Screen Navigation Bars
Callout Navigation Bar Description
1 Title bar Use the Title bar icons to view the current
status of information such as signal strength
and battery power remaining.
Page: 42
Chapter 2 — About the User Interface and Intermec Applications
CK3R and CK3X Mobile Comptuer User Manual 31
The Clock & Alarms screen shows how the horizontal scroll bar
appears when you open an application.
Clock & Alarms Screen with Horizontal Scroll Bar
2 Horizontal scroll bar A horizontal scroll bar appears when you tap
the Title bar. The horizontal scroll bar makes
it easy to access the applications associated
with the Tile bar icons. The horizontal scroll
bar also contains a magnifier which improves
the touch experience by making parts of the
screen large enough to tap with your finger.
The horizontal scroll bar also replaces tabs
within Windows screens and allows for easier
navigation.
3 Tile bar Use the Tile bar to access the Start menu,
navigate within applications, and open the
SIP.
Home Screen Navigation Bars (Continued)
Callout Navigation Bar Description
Page: 43
Chapter 2 — About the User Interface and Intermec Applications
32 CK3R and CK3X Mobile Comptuer User Manual
About Screen Gestures
The Windows Embedded Handheld 6.5 interface supports the use of
gestures with the finger or stylus to move around the screen.
Title Bar Status Icons
Tappable icons on the Title bar immediately show you the status of
your network, the volume, the battery, and the time.
Screen Gestures
Gesture Description
Tap Represents the left click of a mouse.
Double-tap Represents the left double-click of a mouse.
Hold Represents the right click of a mouse when you press and
hold on the screen and a context menu appears.
Flick Initiates scrolling in the direction (horizontal or vertical) the
finger or stylus moves across the screen.
Pan Press and hold on the screen and then drag in any direction.
Title Bar Status Icons
Icon Description
You have a new notification.
You have a new text message.
You have a new email message.
You have a new instant message.
An alarm is set.
(CK3X) Microphone is on.
Internet call is in progress.
Bluetooth is on.
Page: 44
Chapter 2 — About the User Interface and Intermec Applications
CK3R and CK3X Mobile Comptuer User Manual 33
Bluetooth headset is detected.
ActiveSync connection is established.
ActiveSync synchronization is in progress.
There is a problem with the ActiveSync synchronization.
Connected to a Wi-Fi network.
Connected to a Wi-Fi network, and other networks are
detected.
Wi-Fi synchronization is in progress.
Other Wi-Fi networks are detected.
Information about a new Wi-Fi network is available.
Wi-Fi is on, but not connected to a network, and other
networks are detected.
Wi-Fi is on, but not connected to a network, and no networks
are detected.
A network connection is active.
A network connection is inactive.
The volume is on.
The volume is off.
The battery has full charge.
The battery has a high charge.
The battery has a medium charge.
The battery has a low charge.
Title Bar Status Icons (Continued)
Icon Description
Page: 45
Chapter 2 — About the User Interface and Intermec Applications
34 CK3R and CK3X Mobile Comptuer User Manual
Calibrate the Screen
If the touch screen does not respond when you tap it with the stylus,
you may need to align the screen using the stylus.
1 Tap Start > Settings > Systems > Screen.
2 Tap Align Screen and follow the instructions to align the screen.
3 Tap OK.
About Intermec Applications
Intermec provides many useful applications to help you configure,
troubleshoot, and connect your computer to other devices and
networks. You can also download additional applications from the
Intermec website to help you use all of the features of your computer.
The battery has a very low charge.
The computer is attached to external power and the battery is
charging.
No battery is installed in the computer.
Title Bar Status Icons (Continued)
Icon Description
Page: 46
Chapter 2 — About the User Interface and Intermec Applications
CK3R and CK3X Mobile Comptuer User Manual 35
Intermec Applications on the Computer
Intermec applications help you configure, troubleshoot, and connect
your computer to other devices and networks.
Intermec Applications Available on the Mobile Computer
Icon Application Description
Bluetooth Audio Use the Bluetooth Audio application to
connect to a Bluetooth headset or hands-free
device.
CloneNGo Use CloneNGo to configure basic device
settings on multiple client computers from
one master computer. For more information,
see the CloneNGo User Guide.
Intermec Settings Use Intermec Settings to configure your
computer. You can use Intermec Settings to
individually configure a computer or you can
use it through SmartSystems to configure all
of your computers.
ISpyWiFi Use ISpyWiFi to check your 802.11 status and
diagnose issues with the connection.
Profile Settings Use Profile Settings to easily configure the
computer for a specific use. You can choose
predefined values for the Power and
Scanning.
ScanDiagnostic Use the ScanDiagnostic application to
troubleshoot problems with the internal or
external scanner.
Sensor Calibration Use the Sensor Calibration application to
calibrate the accelerometer.
Wireless Center Use the Wireless Center to turn radios (Wi-Fi,
Bluetooth) on and off and configure settings
for each radio.
Wireless Printing Use the Wireless Printing application to
connect to a Bluetooth printer.
Page: 47
Chapter 2 — About the User Interface and Intermec Applications
36 CK3R and CK3X Mobile Comptuer User Manual
Downloadable Intermec Applications for the Computer
You can download Intermec applications to extend the capabilities of
the computer. You may need to purchase an Intermec license to run
some applications. To find an application, go to www.intermec.com
> Support > Downloads.
About Features Demo
Intermec Features Demo provides a simple way to explore the key
features of your mobile computer. Features Demo applications
demonstrate scanning, document imaging, image capture, and
printing functionality. Many of the applications that are part of
Features Demo also have separate full-featured versions that you can
download and license for your computer. For more information on
Features Demo, see Intermec Features Demo User Guide.
About Intermec Browser
Intermec Browser is a web browser designed for Intermec computers
and is compatible with Microsoft® Internet Explorer® 6 (IE6) and
Pocket Internet Explorer (PIE). This locked-down application
deliberately limits normal web browser functionality. For example,
users cannot exit the program, type URLs, or use the Back button. You
can configure Intermec Browser for your specific application
requirements and you can design your own web pages.
You can download and use Intermec Browser for free for a 60-day
evaluation period. After the evaluation period expires, you need to
purchase a license. For more information on Intermec Browser, see the
Intermec Browser User Manual.
Wireless Readers Use the Wireless Readers application to
connect the computer to the IP30 RFID
reader.
Wireless Scanning Use the Wireless Scanning application to
connect to a Bluetooth scanner.
Intermec Applications Available on the Mobile Computer (Continued)
Icon Application Description
Page: 48
Chapter 2 — About the User Interface and Intermec Applications
CK3R and CK3X Mobile Comptuer User Manual 37
About Intermec HTML5 Browser
Intermec HTML5 Browser provides a free open-platform application
environment for Intermec computers. You can now run the same
cross-platform web applications on an Intermec computer that you
can run on iOS and Android devices. Intermec HTML5 Browser also
lets you run applications while the computer is connected to the web
or while it is offline. For more information on the HTML5 Browser, see
the Intermec HTML5 Browser User Guide
About Intermec Launcher
Intermec Launcher is a Microsoft Windows application, designed for
Intermec mobile computers, that provides a platform from which
other applications may be launched while attempting to provide a
locked-down environment. You can configure Intermec Launcher for
your specific application requirements. You can download and use
Intermec Launcher for a 60-day evaluation period. After the evaluation
period expires, you will need to purchase a license. For more
information on Intermec Launcher, see the Intermec Launcher
Version 2.00 User Guide.
About Intermec Terminal Emulator
Intermec Terminal Emulator (ITE) is Intermec’s popular terminal
emulation client designed for enterprise-level data collection. In a
single client, ITE supports multiple emulation protocols. Its features
include session persistence, remote management and configuration,
and multiple security options. ITE provides a consistent user interface
and a common menu structure (Intermec Settings), which simplifies
the use and management of applications running on Intermec mobile
computers.
You can download and use ITE for free for a 60-day demo period.
During the demo period, a demo mode message box appears each time
you launch ITE. Press Enter to close the message box. When the demo
period expires, you need to purchase a license. For more information
on ITE, see the Intermec Terminal Emulator (ITE) User Guide.
Page: 49
Chapter 2 — About the User Interface and Intermec Applications
38 CK3R and CK3X Mobile Comptuer User Manual
About SmartSystems
Intermec SmartSystems™ is an easy-to-use centralized software
platform. With SmartSystems, IT Administrators and Integrators can
perform hands-free provisioning and deploy and manage Intermec
devices.
SmartSystems provides a consistent way to manage Intermec devices
located on-site or remotely to maximize IT resources and lower the
total cost of ownership for Intermec data collection equipment.
SmartSystems Foundation can be downloaded at no charge from the
Intermec website. For more information, visit
www.intermec.com/SmartSystems.
Page: 50
39
3
Configure the Computer
Use this chapter to learn about the available methods for
configuring your computer and how to use Intermec Settings.
You can also use this chapter to learn how to configure
network communications and wireless security.

Question & answers

There are no questions about the Asus V6-M4A3000E yet.

Ask a question about the Asus V6-M4A3000E

Have a question about the Asus V6-M4A3000E but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Asus V6-M4A3000E. Please make sure that you describe your difficulty with the Asus V6-M4A3000E as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.