Asus Gx950 manual

View a manual of the Asus Gx950 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Asus
  • Product: Mouse
  • Model/name: Gx950
  • Filetype: PDF
  • Available languages: English, German, French, Spanish, Italian, Portuguese, Polish, Romanian, Turkish, Slovak, Hungarian

Table of Contents

Page: 0
User Manual
ASUS GX950 Gaming Mouse
Page: 1

English
Q7297
First Edition (V1)
May 2012
Copyright © 2012 ASUSTeK Computer Inc.All Rights Reserved.
No part of this manual,including the products and software described in it,may be reproduced,
transmitted,transcribed,stored in a retrieval system,or translated into any language in any form
or by any means,except documentation kept by the purchaser for backup purposes,without the
express written permission of ASUSTeK Computer Inc.(“ASUS”).
Product warranty or service will not be extended if:(1) the product is repaired,modified or altered,
unless such repair,modification of alteration is authorized in writing by ASUS;or (2) the serial
number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL“AS IS”WITHOUT WARRANTY OF ANY KIND,EITHER EXPRESS
OR IMPLIED,INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.IN NO EVENT SHALL ASUS,ITS
DIRECTORS,OFFICERS,EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT,SPECIAL,INCIDENTAL,
OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,LOSS OF BUSINESS,
LOSS OF USE OR DATA,INTERRUPTION OF BUSINESS AND THE LIKE),EVEN IF ASUS HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS
MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY,AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,AND
SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS.ASUS ASSUMES NO RESPONSIBILITY OR
LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL,INCLUDING THE
PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies,and are used only for identification or explanation and to
the owners’benefit,without intent to infringe.
Page: 3

English
Contact Information
ASUSTeK COMPUTER INC.
Address		 15 Li-Te Road,Peitou,Taipei,Taiwan 11259
Telephone 		 +886-2-2894-3447
Fax 			 +886-2-2890-7798
E-mail			 info@asus.com.tw
Web site		 www.asus.com.tw
Technical Support
Telephone 		 +86-21-38429911
Online support		 support.asus.com
ASUS COMPUTER INTERNATIONAL (America)
Address		 800 Corporate Way,Fremont,CA 94539,USA
Telephone 		 +1-510-739-3777
Fax			 +1-510-608-4555
Web site		 usa.asus.com
Technical Support
Telephone 		 +1-812-282-2787
Support fax		 +1-812-284-0883
Online support		 support.asus.com
ASUS COMPUTER GmbH (Germany and Austria)
Address		 Harkort Str.21-23,D-40880 Ratingen,Germany
Fax			 +49-2102-959911
Web site		 www.asus.de
Online contact		 www.asus.de/sales
Technical Support
Telephone (Component)		 +49-1805-010923*
Telephone (System/Notebook/Eee/LCD)		 +49-1805-010920*
Support Fax		 +49-2102-9599-11
Online support		 support.asus.com
* EUR 0.14/minute from a German fixed landline;EUR 0.42/minute from a mobile phone.
Page: 4
English

Notices
Safety Certifications
•	 CE Marking
•	 China RoHS EFUP Labeling - 10Years
•	 C-Tick Mark
•	 BSMI Certification
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules.Operation is subject to the following two
conditions:
•	 This device may not cause harmful interference,and
•	 This device must accept any interference received including interference that may cause
	 undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection
against harmful interference in a residential installation.This equipment generates,uses and can
radiate radio frequency energy and,if not installed and used in accordance with manufacturer’s
instructions,may cause harmful interference to radio communications.However,there is no
guarantee that interference will not occur in a particular installation.If this equipment does cause
harmful interference to radio or television reception,which can be determined by turning the
equipment off and on,the user is encouraged to try to correct the interference by one or more of the
following measures:
•	 Reorient or relocate the receiving antenna.
•	 Increase the separation between the equipment and receiver.
•	 Connect the equipment to an outlet on a circuit different from that to which the
	 receiver is connected.
•	 Consult the dealer or an experienced radio/TV technician for help.
CAUTION:Any changes or modifications not expressly approved by the grantee of this device could
void the user’s authority to operate the equipment.
Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser
Notice No.50,dated June 24,2007.
Page: 5

English
DO NOT throw the mouse in municipal waste.This product has been designed to
enable proper reuse of parts and recycling.This symbol of the crossed out wheeled bin
indicates that the product (electrical and electronic equipment) should not be placed in
municipal waste.Check local regulations for disposal of electronic products.
REACH
Complying with the REACH (Registration,Evaluation,Authorisation,and Restriction
of Chemicals) regulatory framework,we published the chemical substances in our
products at ASUS REACH website at http://csr.asus.com/english/REACH.htm.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest
standards for protecting our environment.We believe in providing solutions for you to
be able to responsibly recycle our products,batteries,other components,as well as the
packaging materials.Please go to http://csr.asus.com/english/Takeback.htm for the
detailed recycling information in different regions.
Page: 6
English

Check your ASUS GX950 Gaming Mouse package for the following items:
•	 ASUS GX950 Gaming Mouse
•	 User Manual
If any of the above items is damaged or missing,contact your retailer immediately.
Package Contents
Specifications Summary
Model Name GX950
ConnectivityTechnology Wired
Tracking Laser
OS Support Windows® XP / Windows® Vista / Windows® 7
Dimensions (mm) Mouse:122(L) x 82(W) x 43(H)
Cable Length 1.8m with cable sleeve
Weight Mouse:150g (adjustable)
Buttons / Switches
1 x Left button / Right button / Scroll wheel
2 x Side buttons
1 x DPI button
1 x Profile switch
Resolution
50 ~ 8200 dpi (adjustable)
Default:800dpi (Level 1),1600dpi (Level 2),3200dpi (Level 3),
5600dpi (Level 4)
Interface Gold plated USB
Specifications are subject to change without prior notice.
Page: 7

English
Knowing your ASUS GX950 Gaming Mouse
Your ASUS GX950 Gaming Mouse comes with a left button,a right button,a scroll
wheel,two side buttons,a DPI button,and a specially designed Profile Switch button.
1 Left button
2 Right button
3 Scroll wheel
4
DPI switch
Move the DPI switch forward/backward to change the mouse resolution.The DPI switch
LEDs light up when you move the DPI switch.See the table on the next page for the LED
indications*.
5
Profile switch / Profile indicator
Press the Profile switch to select a profile.The switch lights up when you press it.See the
table on the next page for the LED indications**.
6 LED DPI indicator*
7 GX950 logo
8 IE Forward button
9 IE Backward button
10 Mouse feet
11 Twin-Eye Laser sensor
12 Weight base (5 x 4.5g blocks)***
1
2
3
4
5
6
7
9
8
10
10
10
10
11
12
10
***	To adjust the mouse weight,add or remove the weight blocks.
Page: 8
English

LED colors Indications
Do not light up. Normal Profile
Green Profile 1
Red Profile 2
Orange Profile 3
**	Profile switch LED indications
Number of lit LEDs Indications
1 Level 1 (defaul:800 dpi)
2 Level 2 (defaul:1600 dpi)
3 Level 3 (defaul:3200 dpi)
4 Level 4 (defaul:5600 dpi)
*	DPI switch LED indications
NOTE: The DPI levels go up and down in a cycle.When the mouse is set to Level 4,and
you keep moving the DPI switch forward,the DPI level will go down to Level 1 and then
go up to Level 2 and higher DPI levels.When the mouse is set to Level 1,and you keep
moving the DPI switch backward,the DPI level will go up to Level 4 and then go down
to Level 3 and lower DPI levels.
Connecting your ASUS GX950 Gaming Mouse
Connect your ASUS GX950 Gaming
Mouse to your computer’s USB port.
Page: 9
10
English
Using the setup utility
Do either of the following to launch the setup utility:
•	 Click the ASUS ROG Gaming Mouse GX950 shortcut on the Windows®
desktop.
•	 Click Start > All Programs > ASUS Gaming Mouse > ASUS ROG Gaming
Mouse GX950.
•	 Right-click the icon from the Windows® taskbar,then select Launch
GX950 APP.
If the screen below appears,plug your ASUS GX950 Gaming Mouse into your
computer’s USB port.The utility will automatically detect the mouse and continue to
the main menu.
Customizing your mouse (DPI values / Macro
commands / Button functions)
Go to ASUS website at www.asus.com to download the latest driver and install it to
customize your mouse's DPI values,Macro commands,and button functions.
Page: 10
English
11
1 1
1
1
Items Descriptions
1. Click each tab to display the selected profile menu.
2. Displays the profile icon which is configurable in Profile 1~3 menus.
3. Click to reset the DPI configuration to the last settings you have saved.
4. Drag the slider to adjust the DPI value for each level.*
5. Click to reset the button settings to the last settings you have saved.
6. Click to display the indications of different Profile indicator colors.
7. Click to load a profile you have saved for your mouse.
8. Click to save the current profile settings to your hard disk drive.
9. Click to display the Options menu which allows you to adjust the mouse polling rate,
configure the Angle Snapping and Lift-off features.See page 15 for details.
10. Click to reset all the mouse settings to the factory defaults.
11. Click to save the settings you have made.
12. Click to save the settings you have made and exit the program.
2
4
3
5
6
8
7
12
11
Main menu
*	Each profile provides four DPI levels.The DPI switch LEDs light up indicating the DPI level you are
using.See page 9 for the detailed LED indications.
9 10
Page: 11
12
English
Profile 1 menu
1
2
3
Items Descriptions
1. Click to open the Edit menu which allows you to change the profile name and profile icon.
2. Enter the profile name you want to use.
3. Click to locate the image file you want to use as the profile icon.
4. Select a function for each button / action from the drop down list.
* Refer to the table below for more details.
4
4
4
4
4
4
Items Descriptions
L-Button Makes the button behave like the left mouse button.
R-Button Makes the button behave like the right mouse button.
M-Button Makes the button behave like the middle mouse button.
IE Backward Makes the button behave like the IE Backward button. When selected,
press the button to go to the previous page you viewed.
IE Forward Makes the button behave like the IE Forward button.When selected,press
the button to go to the next page you viewed.
continued on the next page
Page: 12
English
13
Items Descriptions
Keyboard When selected,press the button to perform a keystroke or keystroke
sequence.
Macro When selected,press the button to run a command or series of commands
which you can edit though the Edit Macro menu.See page 14 for more
details.
DPI[+] When selected,press the button to increase the DPI value.
DPI[-] When selected,press the button to decrease the DPI value.
Profile Switch Makes the button behave like the profile switch button.
Wheel [left] /
[right]
When selected,press the button to scroll leftward / rightward as a tilt
wheel does.
NOTE:This function only work in the Microsoft® Office applications under
the Windows® 7 / Vista operating systems.
Rapid Fire [mouse] When selected,press the button to do a rapid fire in a click-to-attack game,
which is the same as clicking the left mouse button three times.
Rapid Fire [key] When selected,press the button to do a rapid fire in a game using the
Spacebar to attack,which is the same as pressing the Spacebar three times.
Web Browser When selected,press the button to launch your default web browser.
E-mail When selected,press the button to launch your default email application.
Media Player When selected,press the button to launch your default media player.
Play/Pause
When selected,these buttons become playback control buttons in an
active media player.
Stop
NextTrack
PrevTrack
Volume Up / Down When selected,press the button to increase / decrease the system volume.
Mute When selected,press the button to turn the volume’s mute mode on/off.
Calculator When selected,press the button to launch the Calculator application.
My Computer When selected,press the button to open My Computer window.
Launch GX950
APP
When selected,press the button to launch this setup utility.
Disabled Select this item to deactivate the button.
Page: 13
14
English
Items Descriptions
Edit Macro Click to open the Edit Macro menu.
Timing Check this item to record the time between pressing down and releasing a
button.(Default:12ms)
Insert When checked,the new instruction will be inserted before the selected
instruction.Otherwise,any new instruction will be given the first priority.
Start Click to start recording the keystrokes and/or mouse actions.
Stop Click to stop recording the keystrokes and/or mouse actions.
Clear Click to clear all the saved instructions.
Move up/down Click to move up/down the selected instruction.
Instruction cycle
time
When Timing is unchecked,all the actions’delay time will be the value you
chose from the drop down list.
Loop Sets the macro to run at a click and stop when you click again.
Fire Sets the macro to run once at one click.
Keeping fire Sets the macro to run when you hold down the button and stop when you
release the button.
Export Click to save the current macro to your hard disk drive.
Import Click to load a macro from your hard disk drive.
Edit Macro menu
Page: 14
English
15
Options menu
Items Descriptions
1. Select your mouse polling rate from the drop down list.Configuration options:125Hz,
250Hz,500Hz,1000Hz (default).
2. Tick Angle Snapping to enable the Angle Snapping feature.
Angle snapping brings smooth and straight mouse movements.By default,Angle
Snapping is disabled.
3. Tick Lift Off to enable the Lift-off feature,and then drag the bar to adjust the Lift-off
height from the lowest to the highest.Clear the Lift Off box to automatically adjust the
Lift-off height.
When the Lift-off feature is enabled,your mouse stops tracking when you lift your mouse
off the mouse surface higher than the specified Lift-off height.
1
2
3
Page: 15
16
English
Taskbar menu
Items Descriptions
1. The GX950 mouse logo appears on the taskbar when the program is properly installed.
2. Click to open the main menu of the GX950 mouse setup utility.
3. Click to visit the ASUS official website.
4. Click to exit the setup utility.
1
2
3
4
Page: 19
20
繁體中文
繁體中文
說明
Safety Certifications
•	 CE Marking
•	 China RoHS EFUP Labeling - 10Years
•	 C-Tick Mark
•	 BSMI Certification
•	 UL Mark
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
• 	 This device may not cause harmful interference, and
• 	 This device must accept any interference received including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
•	 Reorient or relocate the receiving antenna.
•	 Increase the separation between the equipment and receiver.
•	 Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
•	 Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modifications not expressly approved by the grantee of this device
could void the user’s authority to operate the equipment.
Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007.
Page: 62
Deutsch
63
Deutsch
Hinweise
Sicherheitszertifikate
•	 CE Marking
•	 China RoHS EFUP Labeling - 10Years
•	 C-Tick Mark
•	 BSMI Certification
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules.Operation is subject to the following two
conditions:
•	 This device may not cause harmful interference,and
•	 This device must accept any interference received including interference that may cause
	 undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection
against harmful interference in a residential installation.This equipment generates,uses and can
radiate radio frequency energy and,if not installed and used in accordance with manufacturer’s
instructions,may cause harmful interference to radio communications.However,there is no
guarantee that interference will not occur in a particular installation.If this equipment does cause
harmful interference to radio or television reception,which can be determined by turning the
equipment off and on,the user is encouraged to try to correct the interference by one or more of the
following measures:
•	 Reorient or relocate the receiving antenna.
•	 Increase the separation between the equipment and receiver.
•	 Connect the equipment to an outlet on a circuit different from that to which the
	 receiver is connected.
•	 Consult the dealer or an experienced radio/TV technician for help.
CAUTION:Any changes or modifications not expressly approved by the grantee of this device could
void the user’s authority to operate the equipment.
Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser
Notice No.50,dated June 24,2007.
Page: 74
Manuale ������
Utente
ASUS GX950 Gaming Mouse
Page: 92
日
本
語
93
日
本
語
ご注意
Safety Certifications
•	 CE Marking
•	 China RoHS EFUP Labeling - 10Years
•	 C-Tick Mark
•	 BSMI Certification
Federal Communications Commission �������������
Statement
(原文)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
•	 This device may not cause harmful interference, and
•	 This device must accept any interference received including interference that may cause
	 undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•	 Reorient or relocate the receiving antenna.
•	 Increase the separation between the equipment and receiver.
•	 Connect the equipment to an outlet on a circuit different from that to which the
	 receiver is connected.
•	 Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modifications not expressly approved by the grantee of this device
could void the user’s authority to operate the equipment.
Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to
Laser Notice No. 50, dated June 24, 2007.
Page: 122
Čeština
123
Upozornění
Safety Certifications
•	 CE Marking
•	 China RoHS EFUP Labeling - 10Years
•	 C-Tick Mark
•	 BSMI Certification
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
•	 This device may not cause harmful interference, and
•	 This device must accept any interference received including interference that may cause
	 undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•	 Reorient or relocate the receiving antenna.
•	 Increase the separation between the equipment and receiver.
•	 Connect the equipment to an outlet on a circuit different from that to which the
	 receiver is connected.
•	 Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modifications not expressly approved by the grantee of this device could
void the user’s authority to operate the equipment.
Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007.
Page: 137
138
Magyar
Magyar
Notices
Safety Certifications
•	 CE Marking
•	 China RoHS EFUP Labeling - 10Years
•	 C-Tick Mark
•	 BSMI Certification
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
•	 This device may not cause harmful interference, and
•	 This device must accept any interference received including interference that may cause
	 undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•	 Reorient or relocate the receiving antenna.
•	 Increase the separation between the equipment and receiver.
•	 Connect the equipment to an outlet on a circuit different from that to which the
	 receiver is connected.
•	 Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modifications not expressly approved by the grantee of this device could
void the user’s authority to operate the equipment.
Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007.
Page: 152
Polski
153
Polski
Uwagi
Safety Certifications
•	 CE Marking
•	 China RoHS EFUP Labeling - 10Years
•	 C-Tick Mark
•	 BSMI Certification
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
•	 This device may not cause harmful interference, and
•	 This device must accept any interference received including interference that may cause
	 undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•	 Reorient or relocate the receiving antenna.
•	 Increase the separation between the equipment and receiver.
•	 Connect the equipment to an outlet on a circuit different from that to which the
	 receiver is connected.
•	 Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modifications not expressly approved by the grantee of this device could
void the user’s authority to operate the equipment.
Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007.
Page: 166
Português
167
Português
Contact Information
ASUSTeK COMPUTER INC.
Address		 15 Li-Te Road,Peitou,Taipei,Taiwan 11259
Telephone 		 +886-2-2894-3447
Fax 			 +886-2-2890-7798
E-mail			 info@asus.com.tw
Web site		 www.asus.com.tw
Technical Support
Telephone 		 +86-21-38429911
Online support		 support.asus.com
ASUS COMPUTER INTERNATIONAL (America)
Address		 800 Corporate Way,Fremont,CA 94539,USA
Telephone 		 +1-510-739-3777
Fax			 +1-510-608-4555
Web site		 usa.asus.com
Technical Support
Telephone 		 +1-812-282-2787
Support fax		 +1-812-284-0883
Online support		 support.asus.com
ASUS COMPUTER GmbH (Germany and Austria)
Address		 Harkort Str.21-23,D-40880 Ratingen,Germany
Fax			 +49-2102-959911
Web site		 www.asus.de
Online contact		 www.asus.de/sales
Technical Support
Telephone (Component)		 +49-1805-010923*
Telephone (System/Notebook/Eee/LCD)		 +49-1805-010920*
Support Fax		 +49-2102-9599-11
Online support		 support.asus.com
* EUR 0.14/minute from a German fixed landline;EUR 0.42/minute from a mobile phone.
Page: 167
168
Português
Português
Avisos
Safety Certifications
•	 CE Marking
•	 China RoHS EFUP Labeling - 10Years
•	 C-Tick Mark
•	 BSMI Certification
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules.Operation is subject to the following two
conditions:
•	 This device may not cause harmful interference,and
•	 This device must accept any interference received including interference that may cause
	 undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection
against harmful interference in a residential installation.This equipment generates,uses and can
radiate radio frequency energy and,if not installed and used in accordance with manufacturer’s
instructions,may cause harmful interference to radio communications.However,there is no
guarantee that interference will not occur in a particular installation.If this equipment does cause
harmful interference to radio or television reception,which can be determined by turning the
equipment off and on,the user is encouraged to try to correct the interference by one or more of the
following measures:
•	 Reorient or relocate the receiving antenna.
•	 Increase the separation between the equipment and receiver.
•	 Connect the equipment to an outlet on a circuit different from that to which the
	 receiver is connected.
•	 Consult the dealer or an experienced radio/TV technician for help.
CAUTION:Any changes or modifications not expressly approved by the grantee of this device could
void the user’s authority to operate the equipment.
Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser
Notice No.50,dated June 24,2007.
Page: 182
Română
183
Română
Notificări
Safety Certifications
•	 CE Marking
•	 China RoHS EFUP Labeling - 10Years
•	 C-Tick Mark
•	 BSMI Certification
•	 UL Mark
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
•	 This device may not cause harmful interference, and
•	 This device must accept any interference received including interference that may cause
	 undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•	 Reorient or relocate the receiving antenna.
•	 Increase the separation between the equipment and receiver.
•	 Connect the equipment to an outlet on a circuit different from that to which the
	 receiver is connected.
•	 Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modifications not expressly approved by the grantee of this device could
void the user’s authority to operate the equipment.
Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007.
Page: 197
198
Slovensky
Slovensky
Vyhlásenia
Safety Certifications
•	 CE Marking
•	 China RoHS EFUP Labeling - 10Years
•	 C-Tick Mark
•	 BSMI Certification
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules.Operation is subject to the following two
conditions:
•	 This device may not cause harmful interference,and
•	 This device must accept any interference received including interference that may cause
	 undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection
against harmful interference in a residential installation.This equipment generates,uses and can
radiate radio frequency energy and,if not installed and used in accordance with manufacturer’s
instructions,may cause harmful interference to radio communications.However,there is no
guarantee that interference will not occur in a particular installation.If this equipment does cause
harmful interference to radio or television reception,which can be determined by turning the
equipment off and on,the user is encouraged to try to correct the interference by one or more of the
following measures:
•	 Reorient or relocate the receiving antenna.
•	 Increase the separation between the equipment and receiver.
•	 Connect the equipment to an outlet on a circuit different from that to which the
	 receiver is connected.
•	 Consult the dealer or an experienced radio/TV technician for help.
CAUTION:Any changes or modifications not expressly approved by the grantee of this device could
void the user’s authority to operate the equipment.
Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser
Notice No.50,dated June 24,2007.
Page: 212
Slovenščina
213
Slovenščina
Obvestila
Safety Certifications
•	 CE Marking
•	 China RoHS EFUP Labeling - 10Years
•	 C-Tick Mark
•	 BSMI Certification
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
•	 This device may not cause harmful interference, and
•	 This device must accept any interference received including interference that may cause
	 undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•	 Reorient or relocate the receiving antenna.
•	 Increase the separation between the equipment and receiver.
•	 Connect the equipment to an outlet on a circuit different from that to which the
	 receiver is connected.
•	 Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modifications not expressly approved by the grantee of this device could
void the user’s authority to operate the equipment.
Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007.
Page: 227
228
Español
Notas
Safety Certifications
•	 CE Marking
•	 China RoHS EFUP Labeling - 10Years
•	 C-Tick Mark
•	 BSMI Certification
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules.Operation is subject to the following two
conditions:
•	 This device may not cause harmful interference,and
•	 This device must accept any interference received including interference that may cause
	 undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection
against harmful interference in a residential installation.This equipment generates,uses and can
radiate radio frequency energy and,if not installed and used in accordance with manufacturer’s
instructions,may cause harmful interference to radio communications.However,there is no
guarantee that interference will not occur in a particular installation.If this equipment does cause
harmful interference to radio or television reception,which can be determined by turning the
equipment off and on,the user is encouraged to try to correct the interference by one or more of the
following measures:
•	 Reorient or relocate the receiving antenna.
•	 Increase the separation between the equipment and receiver.
•	 Connect the equipment to an outlet on a circuit different from that to which the
	 receiver is connected.
•	 Consult the dealer or an experienced radio/TV technician for help.
CAUTION:Any changes or modifications not expressly approved by the grantee of this device could
void the user’s authority to operate the equipment.
Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser
Notice No.50,dated June 24,2007.
Page: 242
Türkçe
243
Türkçe
Uyarılar
•	 CE Marking
•	 China RoHS EFUP Labeling - 10Years
•	 C-Tick Mark
•	 BSMI Certification
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
•	 This device may not cause harmful interference, and
•	 This device must accept any interference received including interference that may cause
	 undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•	 Reorient or relocate the receiving antenna.
•	 Increase the separation between the equipment and receiver.
•	 Connect the equipment to an outlet on a circuit different from that to which the
	 receiver is connected.
•	 Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modifications not expressly approved by the grantee of this device could
void the user’s authority to operate the equipment.
Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007.

Question & answers

There are no questions about the Asus Gx950 yet.

Ask a question about the Asus Gx950

Have a question about the Asus Gx950 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Asus Gx950. Please make sure that you describe your difficulty with the Asus Gx950 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.