Archos Blood Pressure Monitor manual

View a manual of the Archos Blood Pressure Monitor below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Archos
  • Product: Smartwatch
  • Model/name: Blood Pressure Monitor
  • Filetype: PDF
  • Available languages: English, German, French, Spanish, Italian

Table of Contents

Page: 0
EN
Version:1.0
User Manual
ARCHOS Blood Pressure Monitor
* Thank you very much for selecting ARCHOS Blood Pressure Monitor.
* Please do read the user manual carefully and thoroughly so as to ensure the safe
usage of this product, and keep the manual well for your further reference in case
you have problems.
Manuel_BPM_book.indd 1 06/06/2014 10:21:20
Page: 1
2
Table of Contents
INTRODUCTION ......................................................................................................................................................................... 2
Safety Information
LCD Display Signal
Monitor Components
BEFORE YOU START ..................................................................................................................................................................6
Installing and Replacing the Batteries
Setting Date and Time
MEASUREMENT........................................................................................................................................................................ 11
Tie the Cuff
Start Measurement
DATA MANAGEMENT............................................................................................................................................................ 13
Recalling the Records
Deleting the Records
INFORMATION FOR USER..................................................................................................................................................... 15
Tips for Measurement
Maintenance
ABOUT BLOOD PRESSURE.................................................................................................................................................... 17
What are systolic pressure and diastolic pressure?
What is the standard blood pressure classification?
Why does my blood pressure fluctuate throughout the day?
Why the blood pressure I get from the hospital is different from home?
If the result is the same if measuring on the right wrist?
TROUBLESHOOTING.............................................................................................................................................................. 19
SPECIFICATIONS ..................................................................................................................................................................... 20
CONTACT INFORMATION..................................................................................................................................................... 21
COMPLIED EUROPEAN STANDARD LIST .........................................................................................................................21
EMC GUIDANCE .......................................................................................................................................................................22
CATALOGUE
Manuel_BPM_book.indd 2 06/06/2014 10:21:20
Page: 2
3
EN
General Description
Thank you for selecting ARCHOS Blood Pressure Monitor. The monitor features blood
pressure measurement, pulse rate measurement and the result storage. The design
provides you with two years of reliable service.
Reading taken by the Blood Pressure Monitor are equivalent to those obtained by a
trained observer using the cuff and stethoscope auscultation method.
This manual contains important safety and care information, and provides step by
step instructions for using the product.
Read the manual thoroughly before using the product.
FEATURES:
* Systolic Blood Pressure
* Diastolic Blood Pressure
* Pulse Rate
* Memory: Up to 60 pieces of records
Safety Information
The below signs might be in the user manual, labeling or other components. They
are the requirement of standard and using.
INTRODUCTION
Manuel_BPM_book.indd 3 06/06/2014 10:21:20
Page: 3
4
Symbol for “THE OPERATION GUIDE
MUST BE READ”
Symbol for “MANUFACTURER”
Symbol for “COMPLIES WITH
MDD93/42/ECC REQUIREMENTS”
Symbol for “Authorized Representative
in the European Community”
Symbol for “TYPE BF APPLIED
PARTS”
The Bluetooth Combination Mark
Symbol for “SERIAL NUMBER” Symbol for “ENVIRONMENT
PROTECTION – Waste electrical
products should not be disposed of
with household waste. Please recycle
where facilities exist. Check with your
local authority or retailer for recycling
advice”
Symbol for “DIRECT CURRENT”
Symbol for “MANUFACTURE DATE”
Manuel_BPM_book.indd 4 06/06/2014 10:21:20
Page: 4
5
EN
CAUTION
Please do read this user manual carefully and thoroughly before use.
This device is intended for adult use only.
This device is intended for non-invasive measuring and monitoring of arterial blood
pressure. It is not intended for use on extremities other than the wrist or for functions
other than obtaining a blood pressure measurement.
Do not confuse self-monitoring with self-diagnosis. This unit allows you to monitor
your blood pressure. Please start or end medical treatment basing solely on
physician’s treatment advice.
If you are taking medication, consult your physician to determine the most
appropriate time for your measurement. Never change a prescribed medication
without your physician’s consent.
This unit is not suitable for continuous monitoring during medical emergencies or
operations.
If the pressure of the cuff exceeds 40 kPa (300 mmHg), the unit will automatically
deflate. Should the cuff not deflate when its pressure exceeds 40 kPa (300 mmHg),
detach the cuff from the wrist and press the START/STOP button to stop inflation.
Do not use the monitor under the conditions of strong electromagnetic field (e.g.
medical RF equipment) that radiates interference signal or electrical fast transient /
burst signal.
The maximum temperature that the applied part can be achieved is 42.5℃ while the
environmental temperature is 40℃.
The device is not AP/APG equipment. It is not suitable for use in the presence of a
flammable anesthetic mixture with air (or oxygen, nitrous oxide).
Please keep the unit out of reach of infants or children, since inhalation or swallowing
of small parts is dangerous or even fata.
Please use ACCESSORIES and detachable parts specified / authorized by
Manuel_BPM_book.indd 5 06/06/2014 10:21:20
Page: 5
6
MANUFACTURER. Otherwise, it may cause damage to the unit or danger to the user
/ patient.
Manufacturer will make available on request circuit diagrams, component parts
listed.
Sensitive people, including pregnant women and those who implanted medical
electronic
Instrument, should avoid using the unit whenever possible.
This unit is not suitable for continuous monitoring during medical emergencies or
operations.
After the cuff inflated long time, the patient’s wrist and fingers will is insufficient,
anesthesia, distending pain and ecchymosis.
Please use the device under the environment which was provided in the user
manual.
Otherwise, the performance and lifetime of the device will been impacted and
reduced.
During using, the patient will contact with the cuff. The materials of the cuff have
been tested and found to comply with requirements of ISO 10993-5:2009 and ISO
10993-10:2010. It will not cause any potential allergic reaction or contact injury.
The device has been evaluated clinically used manual cuff/ stethoscope auscultation
as the reference.
The device doesn’t need to be calibrated in two years of reliable service.
When the device was used to measure patients who have common arrhythmias such
as atrial or ventricular premature beats or atrial fibrillation, the test result may occur
deviation. Please consult your physician about the result.
This device is contraindicated for any female subject who may be suspected of, or is
pregnant.
Besides provided inaccurate readings, the effects of this device on the fetus are
unknown.
Manuel_BPM_book.indd 6 06/06/2014 10:21:20
Page: 6
7
EN
LCD Display Signal
SYMBOL DESCRIPTION EXPLANATION
Systolic Blood Pressure High blood pressure
Diastolic Blood Pressure Low blood pressure
Pulse beat/minute
Low Battery Low battery and please replace the batteries.
Unit Measurement unit of blood pressure
Time Hour: Minute (Month/Day/Year)
IHB Detector Irregular Heartbeat Detector
Bluetooth Successful Bluetooth Connection
Error Error
Memory Recalling the history records
Manuel_BPM_book.indd 7 06/06/2014 10:21:20
Page: 7
8
Monitor Components
Component List:
1. PCBA; 2. Air Pipe; 3. Pump; 4. Valve; 5. Cuff.
List
1. Wrist Blood Pressure Monitor 2. Two AAA-size batteries 3. User Manual
BEFORE YOU START
Installing and Replacing the Batteries
•.Open the battery door.
•.Insert the batteries according to the polarity indications. (Always select the
authorized / specified battery: Two LR03 AAA-size batteries).
•.Close the battery door.
Manuel_BPM_book.indd 8 06/06/2014 10:21:21
Page: 8
9
EN
Battery Life: Approx. 57 days
(Battery capacity: 600 mAH. If measured 3 times per day, each measurement takes
30s, and memory checked once per day, each checking takes 60s. The current for
measurement is 350 mA, and that for records display is 50 mA while the current
when shutdown is 25 uA.)
Setting Date and Time
Please proceed to time setting before your initial use so as to ensure each piece of
record is labeled with a time stamp. (Year Range: 2012-2052; Time Format: 12 Hours)
1. When the monitor is OFF, press and hold“SET”button for 3 seconds to enter Time
Setting Mode.
Manuel_BPM_book.indd 9 06/06/2014 10:21:21
Page: 9
10
2. As pictured in the right, the blinking numeral“6”representing [HOUR]. Press“MEM”
button to change the numeral. Each press will increase the numeral by one in a
cycling manner.
3. Press“SET”button again to confirm [HOUR]. Then the numeral representing
[MINUTE] blinks.
4. Repeat step 2 and 3 to confirm [MINUTE].
5. Repeat step 2 and 3 to confirm [MONTH], [DAY] and [YEAR].
6. After confirming [YEAR], the LCD will display“DONE”and the monitor will shut off.
Manuel_BPM_book.indd 10 06/06/2014 10:21:21
Page: 10
11
EN
Tie the Cuff
1. Remove all accessories (watch, bracelet, etc.) from your wrist. If your physician has
diagnosed you with poor circulation in your wrist, use the other wrist.
2. Roll or push up your sleeve to expose the skin.
3. Apply the cuff to your wrist with your palm facing up.
4. Position the edge of the cuff about 1-1.5 cm.
5. Fasten the wrist cuff around your wrist, leaving no extra room
between the cuff and your skin. If the cuff is too loose, the measurement
will not be accurate.
Resting for 5 minutes before measuring.
Wait at least 3 minutes between measurements. This allows your blood circulation
to recover.
For a meaningful comparison, try to measure under similar conditions. For example,
take daily measurements at approximately the same time, on the same wrist, or as
directed by a physician.
Pair-up the Blood Pressure Monitor with Your Device
1. Turn on Bluetooth and the app. Make sure both are ON
when pair-up is proceeding.
2. When the monitor is OFF, press and hold the START button
for 2 seconds to start pair-up. The symbol and the symbol will be shown on the LCD
alternatively, indicating pair-up is proceeding.
If SUCCEED, symbol will be shown on the LCD.
Manuel_BPM_book.indd 11 06/06/2014 10:21:21
Page: 11
12
If FAIL, symbol will be shown on the LCD.
3. The monitor will shut off automatically after Pair-up process is complete.
MEASUREMENT
Start Measurement
1. After correctly positioning the cuff, press START button to turn on the
monitor, and it will complete the measurement process automatically.
Adjust to zero.
Inflating and measuring.
Manuel_BPM_book.indd 12 06/06/2014 10:21:21
Page: 12
13
EN
Display and save the measuring result.
2. This device will proceed to data transmission automatically after measurement.
The Bluetooth symbol blinks.
3. If the data is successfully transmitted, the LCD will display as pictured to the right.
If the data transmission fails, the LCD will display“ERROR”instead.
4. Press STOP button to turn off the monitor. Otherwise it will power off
automatically.
Manuel_BPM_book.indd 13 06/06/2014 10:21:21
Page: 13
14
DATA MANAGEMENT
Recalling the Records
1. Press“MEM”button to access the memory.
2. Press“MEM/UP”button or“SET/DOWN”button to rotate the history records.“MEM/
UP”to go forward;“SET/DOWN”to go backward.
Deleting the Records
When you did not obtain the accurate measurement, you can clear all the measuring
results by following below steps.
1. Under Memory Recalling Mode, press and hold both the“MEM”
button and the“SET”button for 3 seconds.
Manuel_BPM_book.indd 14 06/06/2014 10:21:21
Page: 14
15
EN
2. The LCD will display“dEL dONE”, indicating that memory clearing is
complete.
3. If you wish to give up clearing, press“START/STOP”to turn off the
monitor.
4. When there is no memory in the monitor, if you press the“MEM”
button to look up
History, the LCD will display as pictured to the right.
INFORMATION FOR USER
Tips for Measurement
It can cause inaccuracy if the measurement is taken in the following circumstances.
Manuel_BPM_book.indd 15 06/06/2014 10:21:21
Page: 15
16
Maintenance
To obtain the best performance, please follow below instructions.
Cleaning: Dust environment may affect the performance of the unit. Please use the
soft cloth to remove the dirt before use.
Please make sure the unit functions safely and it is in proper working conditions
before use.
Please follow the instructions for correct replacement of interchangeable or
detachable parts specified by SERVICE PERSONNEL of MANUFACTURER as
“Replaceable”.
Disposal: Degraded sensors or loosened electrodes may degrade the unit’s
performance or even cause other problems. Please dispose of ACCESSORIES,
detachable parts, and the ME EQUIPMENT according to the local guidelines.
ABOUT BLOOD PRESSURE
What are systolic pressure and diastolic pressure?
Manuel_BPM_book.indd 16 06/06/2014 10:21:22
Page: 16
17
EN
When ventricles contract and pump blood out of the heart, the blood pressure
reaches its maximum value in the cycle, which is called systolic pressure. When the
ventricles relax, the blood pressure reaches its minimum value in the cycle, which is
called diastolic pressure.
What is the standard blood pressure classification?
The blood pressure classification published by World
Health Organization (WHO) and International Society of
Hypertension (ISH) in 1999 is as follows:
Manuel_BPM_book.indd 17 06/06/2014 10:21:22
Page: 17
18
Level
BP (mm
Hg)
Optimal Normal Hypertension
G1 G2 G3
SYS <120 121-130 131-140 141-160 161-180 ≥180
DIA <80 81-85 86-90 91-100 101-110 ≥110
Irregular Heartbeat Detector
This Wrist Blood Pressure Monitor is equipped with an intelligent function of Irregular
Heartbeat (IHB) Detector. During each measurement, this equipment records the
heartbeat intervals and works out the standard deviation. If the heartbeat intervals
compare with the average intervals, the deviation more than 3 is over 25% or more
than 5 is over 15%, this equipment will light up the IHB symbol on the screen when
displaying the measuring result.
Why does my blood pressure fluctuate throughout the day?
1. Individual blood pressure varies every in one day, it also affected by the way you t
i.e. your cuff and your measurement position, so please take the measurement at the
same condition.
Manuel_BPM_book.indd 18 06/06/2014 10:21:22
Page: 18
19
EN
2. The varies of the pressure is greater if the person take medicine.
3. Waiting at least 3 minutes for another measurement.
Why the blood pressure I get from the hospital is different from home?
The blood pressure is different even during 24 hour because of the weather, emotion,
exercise etc., especially the“white coat”in hospital which makes the results are higher
than the ones at home.
If the result is the same if measuring on the right wrist?
It is ok for both wrists, but there will be some different results for different person, so
suggest you measure the same wrist every time.
The attention need to pay when you measure you blood pressure at home:
If the cuff is tied properly.
If the cuff is too tight or too loose.
If the cuff is tied on the wrist.
If you feel anxious pressured.
You had better take deep breath 2-3 times before beginning.
Manuel_BPM_book.indd 19 06/06/2014 10:21:22
Page: 19
20
Advice: adjust yourself for 4-5 minutes until you calm down.
TROUBLESHOOTING
This section includes a list of error messages and frequently asked questions for
problems you may encounter with your wrist blood pressure monitor. If the products
not operating as you think it should, check here before arranging for servicing.
PROBLEM SYMPTOM CHECK THIS REMEDY
No power Display will
not light up.
Batteries are exhausted. Replace with new batteries
Batteries are inserted
incorrectly.
Insert the batteries correctly
Low
batteries
Display is dim
or Display
Batteries are low. Replace with new batteries
Error
massage shows
Data communication
has failed
Check if the APP is on or not, try
data transmission again.
Error 1 shows Inflation is slow or the
cuff is not secure.
Refasten the cuff and then
measure again.
Error 2 shows The cuff is very tight Readjust the cuff, not too loose or
too tight and then measure again.
Error 3 shows The pressure of the cuff
is excess.
Refasten the cuff and then
measure again.
Manuel_BPM_book.indd 20 06/06/2014 10:21:22
Page: 20
21
EN
Error
massage
Error 5 or Error 6 shows System error
occurred.
Retake the measurement.
If the problem persists,
contact the retailer or our
customer service department
for further assistance. Refer
to the warranty for contact
information and return
instructions.
Error 10 or Error 11
shows
The monitor detected
motion, talking or
the pulse is too poor
while measuring.
Relax for a moment and then
measure again.
Error
massage
Error 20 shows The measurement
process does not
detect the pulse
signal.
Loosen the clothing on the
wrist and then measure again.
Error 21shows on the
display.
The treatment of the
measurement failed.
Relax for a moment and then
measure again.
SPECIFICATIONS
Power supply 2*AAA batteries
Display mode Digital LCD V.A.36x41mm
Manuel_BPM_book.indd 21 06/06/2014 10:21:22
Page: 21
22
Measurement mode Oscillographic testing mode
Measurement range Pressure:0kpa-40kpa(0mmHg-300mmHg)
pulse value:(40-199)beat/minute
Accuracy Pressure:
5℃-40℃within±0.4kpa(3mmHg)
0℃-45℃(out of 5℃-40℃)
within±0.7kpa(5mmHg) pulse value:±5%
Normal working condition Temperature:5℃-40℃
Relative humidity ≤80% Atmospheric pressure: 86kPa to 106kPa
Storage & transportation condition Temperature:-20℃ to 60℃
Relative Humidity: 10% to 93% RH
Measurement perimeter of the wrist About 13.5cm-21.5cm
Net Weight Approx.120g(Excluding the dry cells)
External dimensions Approx.80×65×22mm
Attachment 2*AAA batteries, user manual
Mode of operation Continuous operation
Manuel_BPM_book.indd 22 06/06/2014 10:21:22
Page: 22
23
EN
Degree of protection Type BF applied part
Protection against ingress of water IP22
Software version V01
Device classification Internally Powered ME Equipment
WARNING: No modification of this equipment is allowed.
CONTACT INFORMATION
Contact Information
For more information about our products, please visit www.archos.com you can get
customer service, usual problems and customer download, ARCHOS will serve you
anytime.
Manufactured by: GUANGDONG TRANSTEK MEDICAL ELECTRONICS CO., LTD
Company: GUANGDONG TRANSTEK MEDICAL ELECTRONICS CO., LTD
Address: Zone A, 5/F., Investment Building, No. 12, Huizhan East Rd., Torch
Development District, Zhongshan, Guangdong, 528437, China
Authorized European Representative:
Company: MDSS - Medical Device Safety Service GmbH
Address: Schiffgraben 41, 30175 Hannover, Germany
Manuel_BPM_book.indd 23 06/06/2014 10:21:22
Page: 23
24
Complied European Standards List
Risk Management EN/ISO 14971:2007
Labeling EN 15223:2012
User Manual EN 1041:2008
General Requirements
for Safety
EN 60601-1:2006/AC2010
EN 60601-1-11:2010
Non-invasive
Sphygmomanometers
General
Requirements
EN 1060-1:1995+A2:2009
EN 1060-3:1997+A2:2009
EN 1060-4:2004
Electromagnetic
Compatibility
EN 60601-1-2:2007/AC:2010
Software Lifetime EN 62304:2006/AC:2008
Usability EN 60601-1-6:2010
EMC Guidance
Table 1 – Guidance and MANUFACTURER’S declaration – ELECTROMAGNETIC
EMISSIONS – for all ME EQUIPMENT and ME SYSTEM
Manuel_BPM_book.indd 24 06/06/2014 10:21:22
Page: 24
25
EN
Guidance and manufacturer’s declaration – electromagnetic emissions
The device is intended for use in the electromagnetic environment specified
below. The customer or the user of the device should assure that it is used in such
an environment.
Emissions test Compliance Electromagnetic environment
– guidance
RF emissions CISPR 11 Group 2 The device must emit
electromagnetic energy in
order to perform its intended
function. Nearby electronic
equipment may be affected.
RF emissions CISPR 11 Class B
Harmonic emissions IEC
61000-3-2
Not applicable
Voltage fluctuations / flicker
emissions IEC 61000-3-3
Not applicable
Manuel_BPM_book.indd 25 06/06/2014 10:21:22
Page: 25
26
Table 2 – Guidance and MANUFACTURER’S declaration – electromagnetic IMMUNITY
– for all ME EQUIPMENT and ME SYSTEMS
Guidance and manufacturer’s declaration – electromagnetic immunity
The device
is intended for use in the electromagnetic environment specified below. The customer or the user
of the device should assure that it is used in such an environment.
IMMUNITY test IEC 60601 test level Compliance level Electromagnetic
environment – guidance
±6 kV contact
±8 kV air
±6 kV contact
±8 kV air
Floors should be wood,
concrete or ceramic tile.
If floors are covered with
synthetic material, the
relative humidity should
be at least 30%.
Electrostatic
discharge (ESD)
IEC 61000-4-2
Electrical fast
transient / burst
IEC 61000-4-4
±2 kV for power
supply lines
±1 kV for input /
output lines
Not applicable Mains power quality
should be that of a
typical commercial or
hospital environment.
Surge
IEC 61000-4-5
±1 kV line(s) to line(s)
±2 kV line(s) to earth
Not applicable Mains power quality
should be that of a
typical commercial or
hospital environment.
Manuel_BPM_book.indd 26 06/06/2014 10:21:22
Page: 26
27
EN
Voltage dips, short
interruptions and
voltage variations on
power supply input
lines IEC 61000-4-11
<5% UT (>95% dip in
UT) for 0.5 cycle
40% UT (60% dip in
UT) for 5 cycles
70% UT (30% dip in
UT) for 25 cycles
<5% UT (>95% dip in
UT) for 5 s
Not applicable Mains power quality
should be that of a
typical commercial or
hospital environment.
If the user of device
requires continued
operation during power
mains interruptions, it
is recommended that
device be powered from
an interruptible power
supply or a battery.
Power frequency
(50/60 Hz)
magnetic field
IEC 61000-4-8
3 A/m 3 A/m Power frequency
magnetic fields should
be at levels characteristic
of a typical location in
a typical commercial or
hospital environment
NOTE UT is the a.c. mains voltage prior to application of the test level.
Manuel_BPM_book.indd 27 06/06/2014 10:21:22
Page: 27
28
Table 3 – Guidance and MANUFACTURER’S declaration – electromagnetic IMMUNITY
– for ME EQUIPMENT and ME SYSTEMS that are not LIFE-SUPPORTING
Guidance and manufacturer’s declaration – electromagnetic immunity
The device is intended for use in the electromagnetic environment specified below. The customer
or the user of the device should assure that it is used in such an environment.
IMMUNITY
test
IEC 60601 test
level
Compliance
level
Electromagnetic environment – guidance
Portable and mobile RF communications
equipment should be used no closer to any
part of the device, including cables, than
the recommended separation distance
calculated from the equation applicable to
the frequency of the transmitter.
Portable and mobile RF communications
equipment should be used no closer to any
part of the device, including cables, than
the recommended separation distance
calculated from the equation applicable to
the frequency of the transmitter.
Recommended separation distance
Manuel_BPM_book.indd 28 06/06/2014 10:21:22
Page: 28
29
EN
Conducted RF
IEC 61000-4-6
3 Vrms
150 kHz to 80
MHz
Not
applicable
wherePisthemaximumoutputpowerratingofthe
transmitterinwatts(W)accordingtothetransmitter
manufactureranddistherecommendedseparation
distanceinmeters(m).FieldstrengthsfromfixedRF
transmitters,asdeterminedbyanelectromagnetic
sitesurvey,ashouldbelessthanthecompliancelevel
ineachfrequencyrange.bInterferencemayoccurin
thevicinityofequipmentmarkedwiththefollowing
symbol:
Radiated RF
IEC 61000-4-3
3 V/m
80 MHz to 2.5
GHz
3V/m
NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected
by absorption and reflection from structures, objects and people.
Field strengths from fixed transmitters, such as base stations for radio (cellular / cordless)
telephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast
cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due
to fixed RF transmitters, an electromagnetic site survey should be considered. If the measured
field strength in the location in which the device is used exceeds the applicable RF compliance
level above, the device should be observed to verify normal operation. If abnormal performance is
observed, additional measures may be necessary, such as re-orienting or relocating the device.
b Over the frequency range 150 kHz to 80 MHz, field strengths should be less than[V1] V/m.
2.333
Manuel_BPM_book.indd 29 06/06/2014 10:21:23
Page: 29
30
Table 4 – Recommended separation distances between portable and mobile RF
communications equipment and the ME EQUIPMENT or ME SYSTEM – for ME
EQUIPMENT and ME SYSTEMS that are not LIFE-SUPPORTING
Recommended separation distances between
portable and mobile RF communications equipment at the device
The device is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of the device can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the device as recommended below, according to
the maximum output power of the communications equipment.
Rated maximum
output power of
transmitter
(W)
Separation distance according to frequency of transmitter (m)
150 kHz to 80 MHz 80 MHz to 800 MHz 800 MHz to 2.5 GHz
0.01 Not applicable 0.117 0.233
0.1 Not applicable 0.369 0.738
1 Not applicable 1.167 2.333
10 Not applicable 3.690 7.378
100 Not applicable 11.67 23.33
Manuel_BPM_book.indd 30 06/06/2014 10:21:23
Page: 30
31
EN
For transmitters rated at a maximum output power not listed above, the recommended separation
distance d in meters (m) can be determined using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the transmitter in watts (W) according
to the transmitter manufacturer. NOTE 1 At 80 MHz and 800 MHz, the separation distance for
the higher frequency range applies. NOTE 2 These guidelines may not apply in all situations.
Electromagnetic propagation is affected by absorption and reflection from structures, objects and
people.
Manuel_BPM_book.indd 31 06/06/2014 10:21:23

Question & answers

There are no questions about the Archos Blood Pressure Monitor yet.

Ask a question about the Archos Blood Pressure Monitor

Have a question about the Archos Blood Pressure Monitor but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Archos Blood Pressure Monitor. Please make sure that you describe your difficulty with the Archos Blood Pressure Monitor as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.