AEG SR 4322 CD/MP3 manual

View a manual of the AEG SR 4322 CD/MP3 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: AEG
  • Product: CD-player
  • Model/name: SR 4322 CD/MP3
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian, Portuguese, Polish, Russian, Norwegian, Hungarian

Table of Contents

Page: 0
Bedienungsanleitung/Garantie
Gebruiksaanwijzing • Mode d’emploi • Instrucciones de servicio
Manual de instruções • Istruzioni per l’uso • Bruksanvisning
Instruction Manual • Instrukcja obsługi/Gwarancja • Návod k použití
Használati utasítás • Руководство по эксплуатации
SR 4322 CD/MP3
Stereo-Radio mit CD/MP3-Player
Stereo radio met CD/MP3-speler • Radio stéréo avec lecteur CD/MP3
Radio estéreo con reproductor CD/MP3 • Rádio estéreo com leitor CD/MP3
Radio stereo con lettore CD/MP3 • Stereo radio with CD/MP3 player
Stereoradio med CD/MP3-spiller • Radio stereofoniczne z odtwarzaczem CD/MP3
Stereorádio s CD/MP3 přehrávačem • Sztereó rádió CD/MP3 lejátszóval
Стереофонический радиоприёмник с CD/MP3-плейером
05-SR 4322 CD_MP3_AEG.indd 1
05-SR 4322 CD_MP3_AEG.indd 1 09.09.2008 16:38:52 Uhr
09.09.2008 16:38:52 Uhr
Page: 45
English
46
General Safety Instructions
Read the operating instructions carefully before putting
the appliance into operation and keep the instructions in-
cluding the warranty, the receipt and, if possible, the box
with the internal packing. If you give this device to other
people, please also pass on the operating instructions.
• To avoid the risk of fire or an electric shock, you
should not expose the device to rain or moisture.
Consequently, do not use the device in the immediate
vicinity of water - for example near a bath tub, a
swimming pool or in a damp cellar.
• Use the device only for the intended purpose.
• Only connect the device at a properly installed plug
socket. Pay attention that the specified voltage
corresponds to the voltage of the plug socket.
• When using external mains supply, pay attention to
the correct polarity and voltage. Always place the
batteries in the correct direction.
• Assemble the device in such a way that the available
ventilation openings are not covered.
• Never open the housing of the device. Incorrect repairs
can constitute a considerable risk for the user. Should
the device become damaged, in particular the mains
supply cable, do not operate the device any longer, but
rather have it repaired by an expert. Check the mains
supply cable regularly for damage.
• For safety reasons a broken or damaged mains lead
may only be replaced by an equivalent lead from the
manufacturer, our customer service department or a
similary qualified person.
• If the device is not used for a longer period, remove
the plug connector from the plug socket or take out
the batteries.
These symbols may be found on the machine and are
intended to indicate the following:
The lightning symbol should advise the user of
parts in the inside of the device which carry
dangerously high voltage levels.
The symbol with an exclamation mark should
advise the user of important operation or
maintenance instructions in the accompany-
ing documentation.
Devices bearing this symbol work with a „class
1 laser“ for tracing the CD. The built-in safety
switches should prevent the user being expo-
sed to dangerous laser light, which is invisible
to the human eye, when the CD compartment
is opened.
Under no circumstances should these safety switches be
bypassed or manipulated, as this could result in a danger
of exposure to the laser light.
Children and Frail Individuals
• In order to ensure your children‘s safety, please keep
all packaging (plastic bags, boxes, polystyrene etc.)
out of their reach.
WARNING!
Caution! Do not allow small children to play with
the foil as there is a danger of suffocation!
• In order to protect children or frail individuals from
the hazards of electrical equipment, please ensure
that this device is only used under supervision. This
device is not a toy. Do not allow small children to
play with it.
Symbols in these Instructions for Use
Important information for your safety is specially
marked. It is essential to comply with these instructions
in order to avoid accidents and prevent damage to the
machine:
WARNING:
This warns you of dangers to your health and indicates
possible injury risks.
CAUTION:
This refers to possible hazards to the machine or other
objects.
 NOTE: This highlights tips and information.
Special safety information
This device works with
a class 1 laser.
Overview of the Components
1 Telescopic antenna
2 Handle
3 CD compartment
4 TUNING control
5 Band selection switch (FM.ST / FM / AM)
6 Tab for opening the CD compartment
(OPEN/CLOSE)
7 Function selector switch
(OFF / CD/MP3/USB / RADIO)
8 VOLUME (volume control)
9 STOP button
10 SKIP- button (reverse search)
11 SKIP+ button (forward search)
12 IR Sensor for the remote control
13 LCD display
14 FM.ST control lamp
15 ALBUM button (album upwards)
16 PROG button (memory)
17 MODE button (repeat/random)
18 Loudspeaker
19 USB connection
20 PLAY/PAUSE button (Play/Pause)
21 Card slot
05-SR 4322 CD_MP3_AEG.indd 46
05-SR 4322 CD_MP3_AEG.indd 46 09.09.2008 16:39:21 Uhr
09.09.2008 16:39:21 Uhr
Page: 46
English 47
Reverse Side
22 SET button (time)
23 HOUR button (Hours)
24 MIN button (minutes)
25 PHONES Headphones connection
26 AC Mains connection
27 Battery compartment
Remote Control
1 II button (Play/Pause)
2 PROGRAM button (memory)
3 SKIP+/SKIP- buttons
(forward search/reverse search)
4 ALBUM UP button (album upwards)
5 +10 TRACK button
6 MODE button
7 STOP button
Intended Use
This device is used for:
• The reception of radio programmes
• Playing back audio/MP3 CDs.
It is intended exclusively for this purpose and may only
be used as such. It may only be used in the manner
described in these instructions for use. The device must
not be used for commercial purposes.
Any other use of this device is considered to be contrary
to the intended use and may result in damage to materi-
als or even personal injury.
The firm ETV – Elektro-Technische Vertriebsgesellschaft
mbH does not accept any liability for damage caused as
a result of the use of this device contrary to its intended
use.
Start-up of the device/introduction
• Please read the operating instructions carefully
before using the device for the first time!
• Select a suitable location for the device, such as
a dry, flat, non-slip surface on which it is easy to
operate the machine.
• Ensure that the device is sufficiently ventilated!
• Remove the protective film from the display if it is
still present.
Power Supply
• Connect the power cable supplied (see battery
compartment if necessary (27)) to a properly installed
230 V / 50 Hz safety power socket and the mains
connector AC ~ (26) on the back of the machine.
• Ensure that the voltage is the same as that indicated
on the model identification plate.
Setting the Time (in standby mode (OFF))
• Keep the SET button (22) pressed down.
• Press the HOUR button (23) in order to set the hours.
Keep the button pressed down until the desired hour
is reached.
• Press the MIN button (24) in order to set the minutes.
Keep the button pressed down until the desired
minutes are reached.
• The time is stored automatically.
 NOTE:
The time is a 12 hour display.
AM = in the morning; PM = in the afternoon/evening.
 NOTE:
Storage/display of the time is lost as soon as the elec-
tricity supply is interrupted. If you would like the time
to be displayed even when the device is not connected
to the mains, place two batteries of type UM2/R14 1.5
V into the recess of the battery compartment (batteries
not supplied). To do this, open the battery compart-
ment cover on the bottom.
Inserting the Batteries (not supplied)
• Open the lid of the battery compartment (27) on the
bottom.
• Insert 6 batteries of type UM2/R14 1,5V. Please en-
sure that the polarity is correct (see the floor of the
battery compartment)!
• If the device is not used for a long period of time, re-
move the batteries to avoid the spilling of battery acid.
• Then close the battery lid.
 NOTE:
When a mains cable is connected the batteries are
automatically switched off.
CAUTION:
• Different battery types or new and used batteries
must not be used together.
• Batteries are not to be disposed of together with
domestic wastes. Dispose of the used batteries at
the relevant collection bin or at your dealer’s.
WARNING:
Do not expose the batteries to high temperatures or
direct sunlight. Never throw batteries into the fire.
There is a danger of explosion!
Transport Safety Device, CD Compartment
• Open the CD compartment (3) by pulling the lid
upwards by the tab (6).
• Before operating the machine for the first time, re-
move the transport safety device from the CD player
if it is still in place.
05-SR 4322 CD_MP3_AEG.indd 47
05-SR 4322 CD_MP3_AEG.indd 47 09.09.2008 16:39:22 Uhr
09.09.2008 16:39:22 Uhr
Page: 47
English
48
Headphone Socket (25)
Please use headphones with a 3.5 mm stereo jack plug;
these should be inserted into the PHONES socket. The
loudspeakers are then switched off.
Volume
The desired volume can be sent using the VOLUME /
regulator (8).
Switch-off
The machine is switched off when the function selector
switch (7) is turned to the OFF position. The time display
appears. Unplug the device.
USB Connexion (19)
This device has been developed in accordance with
the latest technical developments in the USB field.
Unfortunately the large number of different types of
USB storage media on offer today makes it impossible to
guarantee full compatibility with all USB storage media.
For this reason there may be problems in rare cases
with playing back from USB storage media. This is not a
malfunction of the device.
1. Turn the function selector switch (7) to the CD/MP3/
USB position.
2. Keep the II PLAY/PAUSE button (20/1) pressed
down in order to select USB mode. USB appears in
the display.
3. Connect a USB storage medium. After a few seconds
the total number of tracks appears briefly and then
playback begins. The current song and the letters 
MP3 and USB appear in the display.
For operating instructions please see the section “Playing
CDs/MP3s”.
 NOTE:
If there is no CD in the CD compartment at the same
time, the USB connection is automatically selected.
CAUTION:
Before you remove the USB storage medium turn the
function selector switch (7) to the RADIO position.
Card slot (21)
1. If you would like to play back data on an SD/MMC
card please insert it into the opening provided.
2. Turn the function selector switch (7) to the CD/MP3/
USB position.
3. Keep the II PLAY/PAUSE button (20/1) pressed
down to select CARD mode. CARD appears in the dis-
play. After a few seconds the total number of tracks
appears and then playback begins. The current song
and  MP3 and CARD appear in the display.
For operating instructions please see the section “Playing
CDs/MP3s”.
 NOTE:
• If a USB storage medium is connected it is not
possible to select the memory card.
• If there is no CD in the CD compartment at the
same time, the card slot is automatically selected.
Listening to the Radio
1. Turn the function selector switch (7) to the RADIO
position.
2. Use the band selector switch (5) to select the desired
frequency band.
VHF (Stereo) = FM ST., VHF = FM,
Medium wave = AM (Mono)
3. Tune in the desired station with the station adjust-
ment knob TUNING (4).
4. The FM.ST control lamp (14) only lights up when you
have selected FM stereo and the station is being re-
ceived in stereo quality. If reception is too weak and
there is noise on the station being received, this lamp
will flicker. Where reception is bad we recommend
switching to FM.
5. For VHF/FM mode pull out the telescopic antenna (1)
and turn it to improve reception.
6. An aerial is integrated into the device for the recepti-
on of AM stations. The machine can be aligned to the
station by turning it. In this frequency band programs
are transmitted in „mono“ only.
Playing CDs/MP3
This is how you play a CD
1. Turn the function selector switch (7) to the „CD/MP3/
USB“ position. The time display appears.
2. Open the CD compartment (3) by pulling the lid
upwards by the tab (6).
3. Insert an audio CD with the printed side facing
upwards on to the central cone so that the CD clicks
into place and then close the lid of the CD compart-
ment.
4. After a few seconds the total number of songs/tracks
is shown in the display.
5. The CD will play from the first title. The track cur-
rently being played,  or  MP3 are shown in the
display.
6. In order to remove a CD, please press the STOP key
(9/7), open the CD compartment and lift the CD out
carefully.
Always keep the CD deck closed.
 NOTE:
• In the case of CDs in MP3 format that contain fol-
ders, when the device changes to a different folder
001 appears for the first track of the new folder.
05-SR 4322 CD_MP3_AEG.indd 48
05-SR 4322 CD_MP3_AEG.indd 48 09.09.2008 16:39:22 Uhr
09.09.2008 16:39:22 Uhr
Page: 48
English 49
 NOTE:
• If a disc is incorrectly inserted - or no disc has been
inserted - the symbol „- - -“ and the word „no“
appear in the display.
• Playback of CDs produced by the user cannot be
guaranteed due to the large variety of software and
CD media available.
Description of the CD buttons
 NOTE:
Some keys are to be found both on the device itself
and on the remote control. Keys with the same desi-
gnation have the same function.
II PLAY/PAUSE (20)
Pressing briefly:
You can briefly interrupt and resume playback using this
button. The symbol  flashes in the display. Pressing
again continues playback.
Pressing for a longer time:
Selects the USB connection or card slot.
SKIP+/SKIP- (11/10/3)
With an audio CD or a CD in MP3 format playing:
With SKIP + you can jump to the next or previous track
etc.
• If the button is kept pressed down, the machine
starts to search through the tracks.
The SKIP - button can be used as follows:
Press once = This jumps back to the previous track.
Press twice = This plays the song before etc. If the
button is kept pressed down, the
machine starts to search through the
tracks.
 NOTE:
In the case of CDs in MP3 format that contain folders,
when the device changes to a different folder 001
appears for the first track of the new folder.
STOP (9/7)
The CD stops.
MODE (17/6)
With an audio CD or a CD in MP3 format playing:
Press once = (the REP emits a fixed light) the cur-
rent track is repeated continuously.
Press twice = (the ALL emits a fixed light)
the whole CD is played continuously.
Press three times = the display contains the word RAND
and the track number that is to be
played first. All tracks are played
back in random order.
Press four times = all functions are cancelled. The
normal play mode is resumed.
Only for CDs in MP3 format
Press once = the current track is repeated conti-
nuously (REP appears in the display).
Press twice = the selected folder of the MP3 CD
is repeated continuously (REP
ALBUM appears in the display). Use
the ALBUM UP button (15/4) to
select individual folders.
Press three times = the whole CD is played continuously
( ALL appears in the display).
Press four times = the display contains the word RAND,
MP3 and the track number that is to
be played first. All tracks are played
back in random order.
Press five times = the function is deactivated and the
CD is played in the normal mode.
ALBUM UP (15/4)
Press this button during playback to change to a higher
folder. The display, e.g. ALBUM 001, flashes briefly. Then
the CD begins to play back automatically. If the button is
pressed in stop mode the display also flashes. Then start
playback with the II PLAY/PAUSE button.
+10 TRACK (5 on the remote control)
Press this button to jump forwards 10 tracks at a time
(provided that there are more than 10 tracks stored on
the CD).
Programmed Play
This can be used to program any desired sequence of
tracks.
1. Press the STOP key (9/7).
2. Press the PROG(RAM) key (16/2). The number „P01“
(storage location) and the symbol PROG flash in the
display. Use the SKIP+/SKIP- buttons (11/10/3) to se-
lect the desired track and then press the PROG(RAM)
button again. The display changes to memory slot
P02.
 NOTE:
• In the case of CDs in MP3 format only the titles
within the current ALBUM are selected. Press the
ALBUM UP button (15/4) to change the folder.
• In the case of CDs in MP3 format that contain
folders, when the device changes to a different
folder 001 appears for the first track of the new
folder.
05-SR 4322 CD_MP3_AEG.indd 49
05-SR 4322 CD_MP3_AEG.indd 49 09.09.2008 16:39:22 Uhr
09.09.2008 16:39:22 Uhr
Page: 49
English
50
3. Select the next track with the SKIP+/SKIP- key and
press the PROG(RAM) key again. Repeat the procedu-
re until all the desired tracks are selected.
4. Press the II PLAY/PAUSE key (20/1). The playback
starts. The first track number selected appears in the
display and  or  MP3 and PROG. light up. Press
this button to pause briefly the playback.
5. Press once the STOP key to stop the playback while
retaining the program.
6. To play the programme back again, press the
II PLAY/PAUSE button.
7. In order to delete the programme, first press the
button in stop mode and then the STOP
button. The PROG control lamp goes out.
The device stops automatically once the entire sequence
of programmed tracks is completed. The abbreviation
PROG goes off and the programmed order of tracks is
deleted from the memory.
It is also possible to combine the programmed tracks
with the REPEAT function. After you have programmed
and started the device, please press the MODE button
(17/6) up to three times and then you can use the func-
tions as described under MODE“.
Playing back Music in MP3 Format
With this device it is possible to play back pieces of mu-
sic in MP3 format. The device also supports all standard
CD types: CD, CD-RW, CD-R.
This machine of is able to play MP3 CDs. Up to 200 tracks
can be compressed and stored on these CDs. Your machi-
ne detects an MP3 CD automatically (the total number
of tracks and MP3s appears in the display). If you would
like to play one of these CDs, proceed as described under
„Playing CDs/MP3“. Tracks can be programmed as descri-
bed under „Playing Back Programmed Tracks“.
Please note:
There are a number of different recording and compres-
sion methods, as well as quality differences between CDs
and self-recorded CDs.
Furthermore, the music industry does not adhere to fixed
standards (copy protection).
For these reasons it is possible that in rare cases there are
problems with the playback of CDs and MP3 CDs. This is
not a malfunction of the device.
Cleaning and Maintenance
• Always remove the mains plug before cleaning the
machine.
• Any marks on the surface can be wiped off with a
slightly damp cloth without any additives.
Troubleshooting
Symptoms Course Solution
CD can not be
played back.
CD is not inserted
or inserted incor-
rectly.
Ensure that the
disc is inserted
with the label
facing upwards.
Batteries too
weak.
Insert new bat-
teries or operate
the device with
the mains lead.
CD jumps during
playback.
Check the disc
for fingerprints,
dirt or scratches.
Check the disc
for fingerprints,
dirt or scratches.
Memory card
does not play
back or cannot be
selected.
A USB storage
medium is
connected at the
same time.
Remove the USB
storage medium.
Technical Data
Model: ................................................................ SR 4322 CD/MP3
Power supply:.............................................................230 V, 50 Hz
Battery operation:.............................6 x 1,5 V, Type UM2/R14
Power consumption:...............................................................18 W
Protection class:..............................................................................ΙΙ
Net weight:.............................................................................. 2,0 kg
Radio section:
Frequency ranges:................VHF / FM 87,5 ~ 108,0 MHz
..................MW / AM 530 ~ 1640 kHz
This device has been tested according to all relevant cur-
rent CE guidelines, such as electromagnetic compatibility
and low voltage directives, and has been constructed in
accordance with the latest safety regulations.
Subject to technical changes without prior notice!
Meaning of the “Dustbin” Symbol
Protect our environment: do not dispose of electrical
equipment in the domestic waste.
Please return any electrical equipment that you will no lon-
ger use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect dispo-
sal on the environment and human health.
This will contribute to the recycling and other forms of
reutilisation of electrical and electronic equipment.
Information concerning where the equipment can be
disposed of can be obtained from your local authority.
05-SR 4322 CD_MP3_AEG.indd 50
05-SR 4322 CD_MP3_AEG.indd 50 09.09.2008 16:39:23 Uhr
09.09.2008 16:39:23 Uhr
PROG(RAM)

Question & answers

There are no questions about the AEG SR 4322 CD/MP3 yet.

Ask a question about the AEG SR 4322 CD/MP3

Have a question about the AEG SR 4322 CD/MP3 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the AEG SR 4322 CD/MP3. Please make sure that you describe your difficulty with the AEG SR 4322 CD/MP3 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.