AEG SR 4314 CD/MP3 manual

View a manual of the AEG SR 4314 CD/MP3 below. All manuals on can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: AEG
  • Product: CD-player
  • Model/name: SR 4314 CD/MP3
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian, Portuguese, Polish, Russian, Norwegian, Slovak, Hungarian

Table of Contents

Page: 30
General Safety Instructions
Read the operating instructions carefully before putting the appli-
ance into operation and keep the instructions including the warran-
ty, the receipt and, if possible, the box with the internal packing.
• To avoid the risk of fire or an electric shock, you should not
expose the device to rain or moisture. Consequently, do not
use the device in the immediate vicinity of water - for examp-
le near a bath tub, a swimming pool or in a damp cellar.
• Use the device only for the intended purpose.
• Only connect the device at a properly installed plug socket.
Pay attention that the specified voltage corresponds to the
voltage of the plug socket.
• When using external mains supply, pay attention to the
correct polarity and voltage. Always place the batteries in
the correct direction.
• Assemble the device in such a way that the available
ventilation openings are not covered.
• Never open the housing of the device. Incorrect repairs can
constitute a considerable risk for the user. Should the device
become damaged, in particular the mains supply cable, do
not operate the device any longer, but rather have it repaired
by an expert. Check the mains supply cable regularly for
• For safety reasons a broken or damaged mains lead may
only be replaced by an equivalent lead from the manufactu-
rer, our customer service department or a similary qualified
• If the device is not used for a longer period, remove the plug
connector from the plug socket or take out the batteries.
These symbols may be found on the machine and are intended
to indicate the following:
The lightning symbol should advise the user of parts
in the inside of the device which carry dangerously
high voltage levels.
The symbol with an exclamation mark should advise
the user of important operation or maintenance
instructions in the accompanying documentation.
Devices bearing this symbol work with a „class 1
laser“ for tracing the CD. The built-in safety switches
should prevent the user being exposed to dange-
rous laser light, which is invisible to the human eye,
when the CD compartment is opened.
Under no circumstances should these safety switches be
bypassed or manipulated, as this could result in a danger of
exposure to the laser light.
• In order to ensure your children‘s safety, please keep all
packaging (plastic bags, boxes, polystyrene etc.) out of their
Caution! Do not allow small children to play with the foil as
there is a danger of suffocation!
• To protect children from the dangers posed by electrical
appliances, make sure that the cable is hanging low and that
children do not have access to the appliance.
Special safety information
This device works with
a class 1 laser.
Overview of the Components
1 CD compartment
2  CD STOP button
4 REPEAT button
5 PROGRAM button (CD programming)
6 POWER ON control lamp
7 Function selector switch
8 LCD display
9 BBS button(ON/OFF)
10 I SKIP button (reverse search)
11 I SKIP button (forward search)
Tab for opening the CD compartment
13 VOLUME +/- (volume control)
14 Band selection switch (AM / FM)
15 TUNING control
16 ANT aerial
17 Handle
18 Loudspeaker
Reverse Side
19 PHONES Headphone connection
20 Battery compartment
21 AC~ IN Mains connection
Start-up of the device/introduction
• Read the operating instructions thoroughly before the start-
• Select an appropriate location for the device, e.g. a dry, flat,
non-slip surface on which the device can be easily operated.
• Make sure that the device is adequately ventilated!
• Connect the power cable supplied (see battery compart-
ment (20) if necessary) to a properly installed 230 V/50 Hz
safety power socket and the mains connector AC~ IN (21)
on the back of the machine. Ensure that the voltage is the
same as that indicated on the model identification plate.
The POWER ON (6) control lamp shows that the device is
switched on.
Inserting the Batteries (not supplied)
• Open the lid of the battery compartment (20) on the bottom.
• Insert 6 batteries of type UM2/R14 1,5V. Please ensure that
the polarity is correct (see the floor of the battery compart-
• If the device is not used for a long period of time, remove the
batteries to avoid the spilling of battery acid.
• If the power cable is connected, the batteries are switched
off automatically.
05-SR 4314 AEG 31 07.08.2006, 14:14:05 Uhr
Page: 31
• Different battery types or new and used batteries must not
be used together.
• Then close the battery lid.
Warning: batteries are not to be disposed of together with
domestic wastes. Dispose of the used batteries at the relevant
collection bin or at your dealer’s.
Never throw batteries into the fire.
Transport Safety Device, CD Compartment
• Please open the CD compartment (1) by folding open the
CD compartment OPEN/CLOSE (12) lid to the front.
• Before operating the machine for the first time, remove
the transport safety device from the CD player if it is still in
Headphone Socket
Please use headphones with a 3.5 mm stereo jack plug; these
should be inserted into the PHONES socket (19). The loudspea-
kers are then switched off.
The desired volume can be sent using the VOLUME +/- regulator
The machine is switched off when the function selector switch
(7) is turned to the POWER OFF position. The POWER ON (6)
control lamp goes off. Unplug the device.
This is used to amplify the bass sounds. The switch can be in
one of two positions,
ON or OFF.
Listening to the Radio
1. Turn the function selector switch (7) to the RADIO position.
2. Select the desired frequency band with the band selection
switch (14).
Medium wave = AM; VHF = FM
3. For VHF/FM mode pull out the telescopic antenna (16) and
turn it to improve reception.
4. Tune into the desired station using the TUNING regulator
(15) (see display (8)).
5. To switch off the radio, shift the function selector (7) to the
POWER OFF position.
6. The desired volume can be sent using the VOLUME regula-
tor (13).
Playing CD’s
1. Push the function selection switch (7) to CD.
2. Open the CD compartment (1) by pulling the lid upwards by
the tab (12).
3. Insert a CD with the printed side facing up and close the CD
4. „- - - -“ appears in the display (8) followed by the number
of tracks. Press the II PLAY/PAUSE button (3) in order
to play the CD. The CD will play from the first title „cd01“
appears in the display.
5. With I SKIP (11) you can jump to the next or previous
track etc. If the button is kept pressed down, the machine
starts to search through the tracks. If the button is kept
pressed down in stop mode the machine quickly plays through
the songs until the desired track is reached. When the II
PLAY/PAUSE (3) button is pressed the track begins to play
6. The I SKIP button (10) can be used as follows:
Press once = This starts the current track again
from the beginning.
Press a second time = This jumps back to the previous
Press a third time = This plays the song before etc. If the
button is kept pressed down, the
machine starts to search through the
tracks. If the button is kept pressed
down in stop mode the machine
quickly plays through the songs until
the desired track is reached. When
the II PLAY/PAUSE (3) button is
pressed the track begins to play back.
7. In order to remove a CD, please press the  STOP button
(2), open the CD compartment and lift the CD out carefully.
Please note these instructions for playing back CDs and
CDRs in MP3 format! The device is not able to play back
MP3 files. The CD begins to turn, but the sound cannot be
Note: Playback of CDs produced by the user cannot be
guaranteed due to the large variety of software and CD media
Always keep the CD deck closed.
Note: If a CD has been inserted incorrectly, „- - - -“ flashes in the
display and the letters „Err“ (Error) appear. If no CD has been
inserted „- - - -“ flashes in the display and the message „nocd“
When a CD is playing:
You can briefly interrupt play back; the display (8) flashes. Press
the II PLAY/PAUSE (3) button again in order to continue
When a CD is playing the REPEAT button has a repeat function.
First start the CD and then press the REPEAT button.
Press once: (REP flashes in the display). The current
track is repeated continuously.
Press a second time: (the REP. emits a fixed light). The whole
CD is played continuously.
05-SR 4314 AEG 32 07.08.2006, 14:14:08 Uhr
Page: 32
Press a third time: The function is deactivated.
Programmed Repeat
with the PROGRAM Button
This can be used to program any desired sequence of tracks.
1. Press the  STOP key (2).
2. Press the PROGRAM key (5). „01“ for the storage location
lights up on the left of the display (8). The two right-hand
figures flash and indicate the track number; the letters
PROG also flash. Use the I I SKIP buttons (11/10)
to select the desired track and then press the PROGRAM
button (5) again.
3. Press the II PLAY/PAUSE key (3). The playback starts.
The selected track numbers are shown in the display in the
correct order. Press this button to pause briefly the playback
(see II PLAY/PAUSE section).
4. Press once the  STOP key (2) to stop the playback while
retaining the program.
5. To resume the playback of the program press first the
PROGRAM key once and then the II PLAY/PAUSE key.
6. In order to delete the programme, please press the PRO-
GRAM button and then the  STOP button (2). The PROG
control lamp (6) goes off.
The device stops automatically once the entire sequence of pro-
grammed tracks is completed. The programmed order remains
in the memory until you change to the other mode, the CD is
removed from the CD drawer or the device is switched off.
It is possible to combine the programmed tracks with the repeat
function. After you have programmed and started the device,
please press the REPEAT button (4) up to three times and then
you can use the functions as described under „REPEAT“.
Please note:
There are a number of different recording and compression
methods, as well as quality differences between CDs and self-
recorded CDs.
Furthermore, the music industry does not adhere to fixed
standards (copy protection).
For these reasons it is possible that in rare cases there are
problems with the playback of CDs and MP3 CDs. This is not a
malfunction of the device.
Cleaning and Maintenance
• Always remove the mains plug before cleaning the machine.
• Any marks on the surface can be wiped off with a slightly
damp cloth without any additives.
Technical Data
Model: ....................................................................SR 4314 CD
Power supply: ........................................................ 230 V, 50 Hz
Power consumption:...........................................................14 W
Battery operation:.............................6 x 1,5 V, Type UM2/LR 14
Output rating:............................................................60WPMPO
Protection class: ...................................................................... ΙΙ
Radio section:
Frequency ranges: ......................VHF / FM 87,5 ~ 108 MHz
.......................MW / AM 525 ~ 1615 kHz
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance with
the latest safety regulations.
Subject to technical changes without prior notice!
The device supplied by our Company is covered by a 24 month
guarantee starting on the date of purchase (receipt).
During the life of the guarantee any fault of the device or its
accessories ascribable to material or manufacturing defects will
be eliminated free of charge by repairing or, at our discretion, by
replacing it. The guarantee services do not entail an extension
of the life of the guarantee nor do they give rise to any right to a
new guarantee!
Proof of the guarantee is provided by the proof of purchase.
Without proof of purchase no free replacement or repair will be
carried out.
If you wish to make a claim under the guarantee please return
the entire machine in the original packaging to your dealer
together with the receipt.
Defects to consumables or parts subject to wearing as well as
cleaning, maintenance or the replacement of said parts are not
covered by the guarantee and hence are to be paid!
The guarantee lapses in case of unauthorized tampering.
After the expiry of the guarantee
After the expiry of the guarantee repairs can be carried by the
competent dealer or repair service against the payment of the
ensuing costs.
Meaning of the “Dustbin” Symbol
Protect our environment: do not dispose of electrical equipment
in the domestic waste.
Please return any electrical equipment that you will no longer
use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on the
environment and human health.
This will contribute to the recycling and other forms of reutilisati-
on of electrical and electronic equipment.
Information concerning where the equipment can be disposed of
can be obtained from your local authority.
05-SR 4314 AEG 33 07.08.2006, 14:14:10 Uhr

Question & answers

There are no questions about the AEG SR 4314 CD/MP3 yet.

Ask a question about the AEG SR 4314 CD/MP3

Have a question about the AEG SR 4314 CD/MP3 but cannot find the answer in the user manual? Perhaps the users of can help you answer your question. By filling in the form below, your question will appear below the manual of the AEG SR 4314 CD/MP3. Please make sure that you describe your difficulty with the AEG SR 4314 CD/MP3 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.