AEG DBB5760HM manual

View a manual of the AEG DBB5760HM below. All manuals on can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: AEG
  • Product: Exhaust hood
  • Model/name: DBB5760HM
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian, Swedish, Portuguese, Danish, Polish, Russian, Norwegian, Finnish, Romanian, Turkish, Slovak, Greek, Hungarian, Slovene, Croatian, Ukrainian, Arabic, Bulgarian

Table of Contents

Page: 1
Thank you for choosing this AEG product. We have created it to give you impeccable
performance for many years, with innovative technologies that help make life simpler
– features you might not find on ordinary appliances. Please spend a few minutes reading to
get the very best from it.
Visit our website to:
Get usage advice, brochures, trouble shooter, service information:
Register your product for better service:
Buy Accessories, Consumables and Original spare parts for your appliance:
Recycle the materials with the symbol . Put the packaging in applicable containers to
recycle it. Help protect the environment and human health and to recycle waste of electrical
and electronic appliances. Do not dispose appliances marked with the symbol with the
household waste. Return the product to your local recycling facility or contact your municipal
office department for household waste or the shop where you purchased this product.
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate. Model, PNC, Serial Number.
Warning / Caution-Safety information.
Subject to change without notice.
Before any cleaning or maintenance operation, disconnect
hood from the mains by removing the plug or disconnecting
the mains electrical supply. Always wear work gloves for all
installation and maintenance operations. This appliance can
be used by children aged from 8 years and above and per-
sons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved. Children
shall not be allowed to tamper with the controls or play with
the appliance. Cleaning and user maintenance shall not be
made by children without supervision. The premises where
the appliance is installed must be sufficiently ventilated,
when the kitchen hood is used together with other gas
Page: 2
combustion devices or other fuels. The hood must be
regularly cleaned on both the inside and outside (AT LEAST
ONCE A MONTH). This must be completed in accordance
with the maintenance instructions provided in this manual.
Failure to follow the instructions provided in this user guide
regarding the cleaning of the hood and filters will lead to the
risk of fires. The flaming of foods beneath the hood itself is
severely prohibited.
The use of exposed flames is detrimental
to the filters and may cause a fire risk,
and must therefore be avoided in all
Any frying must be done with care in order
to make sure that the oil does not overheat
and ignite.
CAUTION: Accessible parts of the
hood may become hot when used with
cooking appliances.
For lamp replacement use only lamp type
indicated in the Maintenance/Replacing
lamps section of this manual.
WARNING! Do not connect the
appliance to the mains until the
installation is fully complete.
With regards to the technical and safety
measures to be adopted for fume
discharging it is important to closely follow
the regulations provided by the local
The ducting system for this appliance must
not be connected to any existing ventilation
system which is being used for any other
purpose such as discharging exhaust fumes
from appliances burning gas or other fuels.
Do not use or leave the hood without the
lamp correctly mounted due to the possible
risk of electric shocks.
Never use the hood without effectively
mounted grids.
The hood must NEVER be used as
a support surface unless specifically
Use only the fixing screws supplied with the
product for installation or, if not supplied,
purchase the correct screws type.
Use the correct length for the screws which
are identified in the Installation Guide.
In case of doubt, consult an authorised
service assistance centre or similar
qualified person.
WARNING! Failure to install the
screws or fixing device in accordance
with these instructions may result in
electrical hazards.
The hood serves to aspirate the fumes and
vapors resulting from cooking.
The attached installation manual indicates
the version to be used depending on the
model you have, the suction version with
external evacuation or filtering with
internal recirculation .
The mains power supply must correspond
to the rating indicated on the plate situated
inside the hood. If provided with a plug
connect the hood to a socket in compliance
with current regulations and positioned in
an accessible area, after installation. If it not
fitted with a plug (direct mains connection)
or if the plug is not located in an accessible
area, after installation, apply a double
pole switch in accordance with standards
which assures the complete disconnection
of the mains under conditions relating to
over-current category III in accordance with
installation instructions.
Warning!Before re-connecting the hood
circuit to the mains supply and checking
the efficient function, always check that
the mains cable is correctly assembled.
Page: 3
4.1 Grease filter - The grease filter must
be cleaned once a month using non
aggressive detergents, either by hand or
in the dishwasher, which must be set to a
low temperature and a short cycle. When
washed in a dishwasher, the grease filter
may discolour slightly, but this does not
affect its filtering capacity.
The minimum distance between the
supporting surface for the cooking
equipment on the hob and the lowest part
of the range hood must be not less than
50cm from electric cookers and 65cm from
gas or mixed cookers. If the instructions for
installation for the gas hob specify a greater
distance, this must be adhered to.
ATTENTION! Before performing any
maintenance operation, isolate the
hood from the electrical supply by
switching off at the connector and
removing the connector fuse.
Or if the appliance has been connected
through a plug and socket, then the plug
must be removed from the socket.
The cooker hood should be cleaned
regularly (at least with the same frequency
with which you carry out maintenance of the
fat filters) internally and externally. Clean
using the cloth dampened with neutral liquid
detergent. Do not use abrasive products.
Warning! Failure to carry out the basic
cleaning recommendations of the
cooker hood and replacement of the
filters may cause fire risks. Therefore,
we recommend observing these
The manufacturer declines all responsibility
for any damage to the motor or any
fire damage linked to inappropriate
maintenance or failure to observe the above
safety recommendations.
Page: 4
4.2 Charcoal filter
Type 20 LONG LIFE - Washable activat-
ed charcoal filter
The charcoal filter can be washed once every
two months using hot water and a suitable
detergent, or in a dishwasher at 65°C (if
the dishwasher is used, select the full cycle
function and leave dishes out).
Eliminate excess water without damaging the
filter, then remove the mattress located inside
the plastic frame and put it in the oven for 10
minutes at 100° C to dry completely. Replace
the mattress every 3 years and when the cloth
is damaged.
4.3 Type 15 - NON-washable activated
charcoal filter
The saturation of the charcoal filter occurs
after more or less prolonged use, depending
on the type of cooking and the regularity of
cleaning of the grease filter. In any case it is
necessary to replace the cartridge at least
every four mounths.
The charcoal filter may NOT be washed or
(1*) (2*)
(*) Type 20 (**) Type 15 - Type 20
4.4 Regenerable carbon filter
The carbon filter must be regenerated every
two months (or when the filter saturation indica-
tor - if present - indicates the need for it) and in
accordance with the procedure as shown here
1. Disconnect the electrical appliance from the
2. Clean the filter’s surface with a damp cloth
to remove grease deposits.
3. Put the filter in an oven at 200 degrees for
45 minutes.
4. Turn off the oven and wait for an hour
before taking out the filter.
Attention! Make sure the filter has cooled
down before touching it.
Page: 5
The hood is fitted with a control panel with
aspiration speed selection control and a
light switch to control cooking area lights.
Use the high suction speed in cases
of concentrated kitchen vapours. It is
recommended that the cooker hood suction
is switched on for 5 minutes prior to cooking
and to leave in operation during cooking
and for another 15 minutes approximately
after terminating cooking.
The control switches are located on the
unit’s front panel:
1 T2 T3 T4 T5 T6 T7 T8 T9
2 3 4 5 6 7 8 9
1 Speed ON/OFF button
Control panel on/off key
2 Suction speed (power) key 1:
3 Suction speed (power) key 2:
4 Suction speed (power) key 3:
5 Suction speed (power) key 4:
Note: suction speed (power) key 4 has
a limited duration of 5 minutes, after
which the previous suction speed is
6 "Breeze" function key
(Room ventilation)
The hood switches on at low suction
speed (power) for 60 minutes, after
which it switches off.
7 Filter saturation control and
activation/deactivation key
8 Hob2H
ood function indicator
9 Lights ON/OFF key
Control panel on/off function
With the hood in standby, press key 1 , all
led lights will switch off: the control panel
is off.
Press key 1 again, all led lights will turn
on: the control panel is active.
Carbon filter saturation control activation/
deactivation function
With the hood in standby, press key 5 for
longer than 3 seconds
Key 7 will flash to indicate that the carbon
saturation filter has been activated.
Key 7 will remain lit to indicate that
the carbon saturation filter has been
Filter saturation control and reset
At regular intervals and depending on
the hood temperature, key 7 lights
up to indicate that the filters need to
be maintained in accordance with the
instructions in the relative paragraphs.
Key 7 on with a fixed light: maintenance is
required on the grease filters
Key 7 on and flashing: maintenance is
required on the carbon filter.
Filter saturation indicator reset
With the hood in standby, press key 7 for
longer than 3 seconds.
Repeat the operation if necessary.
Page: 6
5.1 Hob2
The hood is equipped with a function for
wireless connection with the cooktop for
automatic adjustment of the most suitable
speed. Refer to the instruction manual of
the cooktop to verify the presence and
compatibility of this function.
In the case of first connection to the mains
or abrupt disconnection from power supply
(blackout), wait 1 minute to allow the hood
to restore the connection with the cooktop.
When the hood is working in Hob2
mode, key 8 is lit.
The hood is equipped with a lighting system
based on LED technology.
The LEDs guarantee an optimum lighting,
a duration up to 10 times as long as the
traditional lamps and allow to save 90%
electrical energy.
Caution! Do not look directly into the
LED light.
To replace lights, contact authorised spare
part center.
Page: 191

Question & answers

There are no questions about the AEG DBB5760HM yet.

Ask a question about the AEG DBB5760HM

Have a question about the AEG DBB5760HM but cannot find the answer in the user manual? Perhaps the users of can help you answer your question. By filling in the form below, your question will appear below the manual of the AEG DBB5760HM. Please make sure that you describe your difficulty with the AEG DBB5760HM as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.