AEG BSS 4808 manual

View a manual of the AEG BSS 4808 below. All manuals on can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: AEG
  • Product: CD-player
  • Model/name: BSS 4808
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian, Polish, Russian, Hungarian, Ukrainian

Table of Contents

Page: 0
Bedienungsanleitung/Garantie 04
Gebruiksaanwijzing 14
Mode d’emploi 22
Instrucciones de servicio 30
Istruzioni per l’uso 38
Instruction Manual 46
Instrukcja obsługi/Gwarancja 54
Használati utasítás 63
Інструкція з експлуатації 71
Руководство по эксплуатации 79
BSS 4808
D Bluetooth Sound System
NL Bluetooth geluidssysteem
F Système audio Bluetooth
E Sistema de sonido bluetooth
I Impianto acustico Bluetooth
GB Bluetooth Sound System
PL System dźwiękowy Bluetooth
H Bluetooth hangrendszer
UA Акустична система Bluetooth
RUS Звуковая система Bluetooth
Page: 45
User manual
Thank you for choosing our product. We hope you will enjoy
using the appliance.
Symbols in this user manual
Important notes for your safety are marked distinctively. Pay
absolute attention to them to avoid accidents and damage
to the device:
Warns of dangers for your health and indicates potential
risks of injury.
Indicates potential dangers for the device or other objects.
Highlights tips and information for you.
General Safety Guidelines
Before using this device, carefully read this user manual and
keep it together with the Warranty Certificate, cashier receipt
and if possible, the original package inclusive its interior pack-
ing. If you hand on the device to any third person, include the
user manual as well.
•	 To avoid the risk of fire or electric shock, you should not
expose the device to rain or humidity. Do not use the
device near water (e.g. bathroom, swimming pool, humid
•	 The unit is designed solely for private use and its in-
tended purpose. This unit is not designed for commercial
•	 Make sure that the power cable is not bent, pinched, or
comes into contact with heat sources.
•	 Make sure that the power cable is not a tripping hazard.
•	 The AC adapter is only suitable for use in dry rooms.
•	 Connect the AC adapter only to a properly installed
outlet. Be sure the device voltage corresponds to the
grid voltage. Also check that the output current and the
polarity of the power supply match the information on
the connected device.
•	 Do not touch the AC adapter with wet hands!
•	 Always install batteries in the correct direction.
•	 Avoid covering the device’s vent openings.
•	 Never open the device’s case. Improper repairs can cause
severe danger to the user. If the device or particularly the
power cord is damaged, don’t use the device any further
and have it repaired by a qualified specialist. Check the
power cord regularly for damages.
•	 To avoid any danger, a damaged power cord must be
replaced only by the producer, its customer service or a
similarly qualified person with an equal cord.
•	 If the device won’t be used over an extended period of
time, disconnect the power cord and remove the batter-
These symbols may be found on the device and are intended
as warnings:
The lightning flash is intended to alert the
user to the presence of dangerous voltage
within the device.
The exclamation mark is intended to alert the
user to the presence of important operating
and maintenance instruction accompanying
this device.
Products with this symbol operate with a
“Class 1 Laser” for scanning the CD. The built-
in safety switches are intended to prevent the
user from being exposed to the dangerous
laser beam not visible to the eye when open-
ing the CD compartment.
These safety switches must not be bypassed or altered;
otherwise there is a risk of being exposed to the laser beam.
Children and disabled persons
•	 For the safety of your children, keep any packing parts
(plastic bags, cartilage, Styrofoam etc.) out of their reach.
Don’t let small children play with foils for danger of
•	 This device is not intended for use by persons (includ-
ing children) with reduced physical, sensory or mental
capabilities, or lack of experience and/or knowledge
unless they have been given supervision or instructions
concerning the use of the device by a person responsible
for their safety.
•	 Supervise children to ensure they do not play with the
Special safety guidelines
This device operates with a Class 1
This appliance shall not be exposed to dripping or splash-
ing water and that no object filled with liquids such as vases
shall be placed on apparatus.
Do not touch the speaker membranes (A) with your hands
or with objects. This may damage the membranes.
Page: 46
English 47
Overview of the components
1	 CD compartment
2	 Handle for opening the CD compartment
3	 VOLUME control (volume)
4	 LCD display
5	 IR sensor for the remote control
6	 REPEAT button (repeat)
7	 button (Stop)
8	 button (play/pause)
9	 / buttons (search forward/backwards)
10	 PROG button (Memory)
11	 Memory card slot
12	 AUX IN jack
13	 USB connection
14	 FOLDER+ button (folder upward)
15	 MUTE button
16	 FOLDER- button (folder downward)
17	 STANDBY/ON button (standby/power)
18	 EQ button (Equalizer)
19	 FUNCTION function switch
20	 BASS control (Bass)
21	 Nylon handle mounting
22	 Telescopic antenna
A	 Speaker
Rear view (not shown)
DC IN 12 V Power supply connection
Battery compartment
Remote control
1	 STANDBY button
2	 FM button (radio)
3	 AUX/BT button
4	 PROG button (Memory)
5	 PRESET Button (radio memory)
6	 ID3 button
7	 EQ button
8	 / SKIP/TUNING UP button (search forward)
/ SKIP/TUNING DOWN button (search backwards)
9	 STOP / FM MONO/ST button
10	 VOLUME +/- (volume) button
11	 PLAY/PAUSE (play/pause) button
12	 RANDOM button (random playback)
13	 REPEAT/INTRO button (repeat)
14	 FOLDER +/- buttons (Album selection)
15	 MUTE button
16	 CD/USB/SD button
•	 Read the manual thoroughly before operating the de-
•	 Select a suitable location for the device. Suitable loca-
tions are dry, even and anti-slip surfaces on which you
may operate the device easily.
•	 Make sure there is proper ventilation for the device!
•	 Remove, if necessary, the protection sheet from the
Turning up the volume too high may damage your hearing.
Power supply
•	 Insert the grid plug into a properly installed three prong
socket with 230 V, 50 Hz. Connect the device with the
plug connector by inserting its plug into the IN 12 V jack
of the device.
•	 Make sure the grid voltage corresponds to the figures on
the rating plate.
•	 The included AC adapter may only be used with this
device. Do not use it for other devices.
•	 Use only an AC adapter with 12 V ( ). A differ-
ent AC adapter may damage the unit.
•	 Disconnect from mains power supply during longer
periods of non-use.
•	 The preset time and radio stations are lost as soon as
the power supply is interrupted.
Battery Operation (Batteries not supplied)
•	 Open the lid of the battery compartment on the rear
•	 Insert the 10 batteries type UM1/R20 1.5 V. Observe the
correct polarity (see bottom of battery compartment)!
•	 Close the battery compartment.
Should the device not be used for a long periods, remove
the batteries, to prevent any “leakage”.
•	 If a mains cable is connected, the batteries are auto-
matically switched off.
•	 The preset time and radio stations are lost as soon as
you remove the batteries.
•	 Different battery types or new and used batteries must
not be used together.
•	 Do not dispose of batteries with your household trash.
Please hand over at authorized collection points or
return to your dealer.
Page: 47
Do not expose to intense heat, e.g. sunlight, fire etc. Dan-
ger of explosion!
Insert/Replace Battery in Remote Control
The lithium cell in the battery compartment of the remote
control may have been safeguarded for transport with a
piece of foil. This extends the life of the battery. Please
remove this foil before the first use to make the remote
control ready for operation.
•	 Open the battery compartment on the underside of the
•	 Replace the cell by a battery of the same type (CR 2032).
Check that the polarity is correct (see battery compart-
•	 Close the battery compartment.
If the remote is not in use for a lengthy period of time, please
remove the battery to prevent the battery acid from “leaking”.
•	 The battery shall not be exposed to excessive heat
such as sunshine, fire or the like. Danger of explosion!
•	 Keep batteries out of the reach of children. They are
not toys.
•	 Do not force batteries open.
•	 Avoid contact with metallic objects. Rings, nails, screws
etc.) Danger of short circuits!
•	 Short circuits may overheat or even ignite batteries.
This may lead to combustion.
•	 When transporting the batteries, cover the terminals for
your safety with an adhesive strip.
•	 If a battery leaks, do not rub the fluid into the eyes or
the skin. If acid comes into contact with the eyes, rinse
with purified water and seek medical advice if symp-
toms persist.
Batteries must not be disposed of in the garbage. Please
bring used batteries to competent collection centers or
back to the dealer.
Transport securing device of CD compartment
•	 Pull the CD compartment (1) upwards on the handle (2) in
order to open it.
•	 Remove, if present, the transport securing device from
the CD player before starting operation.
•	 Close the CD compartment again.
Turning the device on/ off
•	 Turn the device on by setting the POWER ON/OFF
switch to the “ON” position on the rear side of the
•	 To turn off the device, set the POWER ON/OFF switch
to the “OFF” position. Then, disconnect the device from
the mains.
Setting the clock (during standby mode)
1.	 Briefly hold down the PROG button (10/4). The display
will show “24 HOUR”.
2.	 Use the / button (9/8) to select between 24-hour and
12-hour display setting. Confirm with PROG.
NOTE: The 12-hour setting will result in the following
AM = morning, PM = afternoon.
3.	 Use / buttons to set the hours. Confirm with PROG.
4.	 Use / buttons to set the minutes.
5.	 Press PROG again in order to save the time settings.
General operation
Some buttons you will find on both the device and the
remote control. Buttons with the same name result in
the same functions.
Press STANDBY button to switch the device into standby
mode. Press this button again to turn on the device.
After approx. 20 minutes without a signal, the device auto-
matically switches to standby.
Volume (3/10)
Adjust to your preferred volume level. The display will show
“VOL” and a number. This will equal to the set volume of
BASS control (20)
You can use this control to adjust the bass individually. The
display will show “BASS” and a number.
Infrared remote control
Wireless operation from a distance of up to 5 meters. If this
range gets less, please change the battery . Make sure there
are no obstacles between the remote control and the sensor
(5) on the device during operation.
AUX IN jack (12)
Connect analogue playback devices. When connecting to
this jack you may also listen to the audio of other devices,
such as MP3 or CD players etc., via the speakers.
1.	 Flip the cover downwards.
2.	 Please connect the external device via 3.5 mm plug jack
to the AUX IN jack.
Page: 48
English 49
3.	 Now select AUX mode with the FUNCTION button
(19 on the device) or with the AUX/BT button (3 on the
4.	 You will hear the sound playback through the speakers.
You can adjust the volume with the VOLUME control (3)
or the VOLUME +/- buttons (10 on the remote). The CD
buttons are not active.
5.	 For further functions please refer to the user manual of
the external audio device.
Set the volume of the external device to a proper audible
Always keep the cover closed when not in use.
USB port (13)
This device has been developed in line with the latest techni-
cal advances in the USB field. The wide range of different
USB storage devices of all types which are currently on the
market, unfortunately do not allow us to guarantee full com-
patibility with all USB storage devices. For this reason, in rare
cases there may be problems in playing back files from USB
storage devices. This is not a malfunction of the device.
1.	 Flip open the cover.
2.	 Press the FUNCTION button (19 on the device) or the (16
on the remote) until “USB” appears in the display.
3.	 Directly connect a USB storage medium to the respec-
tive port. READING appears on the display. After a few
seconds, the total number of folders and the title will be
shown for a short time. Playback then begins. The cur-
rent folder (e.g. 01), the current song (e.g. 005), and the
elapsed play time will be shown in the display.
•	 Always directly connect a USB storage medium to
the USB port to prevent any malfunctions.
•	 The USB connection is not suitable for charging
external devices.
For the operation, please follow the section “Play CDs/MP3”.
Always keep the cover closed when not using it.
Before you remove the USB memory medium, switch the
device to Radio operation.
Memory card slot (11)
1.	 Flip open the cover.
2.	 Press the FUNCTION button (19 on the device) or the
CD/USB/SD button (16 on the remote) until “CARD”
shows in the display.
3.	 Insert the memory card into the intended opening until it
audibly locks in with a “click”. Thereby the contacts need
to point downward. READING appears on the display.
After a few seconds, the total number of folders and titles
will be shown for a short time. Playback then begins. The
current folder (e.g. 01), the current song (e.g. 005), and
the elapsed play time are shown in the display.
For operation, please refer to the section “Play CDs/MP3”.
Always keep the cover closed when not using it.
Before you remove the memory card, switch the device to
Radio operation.
Press on the end of the memory card to remove it again.
Listening to the radio
Searching for stations
1.	 Repeatedly press FUNCTION button (19 on the device)
until the display shows “TUNER”. Or press the FM button
(2) on the remote control.
2.	 Use the / buttons (9/8) to tune in the desired station.
3.	 The FM.ST control lamp ((ST)) (in the display) will light up
when the selected station is received with stereo quality.
If reception is too poor and the station experiences static,
the control lamp will flicker. Try to improve the reception
by changing the position of the telescopic antenna. For
FM stations you may use STOP / FM MONO/ST button
(9 on the remote) to switch between MONO and STE-
REO reception. In case of poor reception we recommend
switching to MONO mode.
Saving/Selecting Stations
4.	 When you have found the desired station, press the
PROG button (10/4). MEMORY will light up in the display
and the memory position will flash.
5.	 To select the programming channel, press the PRESET
button (5 on the remote).
6.	 Press PROG to save the settings.
To chose a stored channel, press the PRESET button (5 on the
Playing CDs/MP3
This is how to play a CD
1.	 Repeatedly press FUNCTION button (19 on the device)
until the display shows “CD”. Or press the CD/USB/SD
button (16) on the remote control.
2.	 Pull the CD compartment (1) upwards on the handle (2) in
order to open it.
3.	 Insert the audio CD onto the conical spindle with the
label facing upwards, so that it snaps into place mechani-
cally. Then close the CD compartment cover again.
“READING” briefly appears on the display, then “Cd”,
the number of titles and total playback time. The play-
back starts from the first title on the CD. The current
song, the elapsed playback time and the “Cd” symbol
are displayed.
Page: 49
CD in MP3 format:
“READING” briefly appears on the display. The number
of folders (F) and the titles will then appear briefly. The
playback starts from the first track and from the first
folder. The current folder (e.g. 01), the current song (e.g.
005), and the elapsed playing time will be shown in the
display. Use the FOLDER+ or FOLDER- buttons (14/16/14)
to select the individual folders.
5.	 To remove a CD press the STOP button (7/9), open the
CD compartment and carefully take out the CD.
Always keep the CD door closed.
•	 When playing CD in MP3 format containing folders, the
display will show 001 for the first track of the new folder
when switching to another folder.
•	 Ifadiscisnotproperlyornotatallinserted,“READING”
will light up and the display will show “NO DISC”.
•	 Playback of CDs created by the user cannot be guar-
anteed due to the variety of available software and CD
media equipments.
Playing back music via Bluetooth
Cordless via Bluetooth
Bluetooth involves a technology for wireless radio connec-
tion of devices over a short distance. Devices with Bluetooth
standard are transmitting between 2.402 and 2.480 GHz in
the ISM band (Industrial, Scientific and Medical). Interference
can be caused for example by WLAN-networks, DAB radios,
cordless phones, or microwave ovens which work on the
same frequency band.
This device offers you the possibility to use a Bluetooth-
enabled device. The functional radius is limited to approx.
15 metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (Advanced
Audio Distribution Profile) and has a music-player function,
then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By
streaming, stereo-audio signals are wirelessly transferred be-
tween the playing device (source) and the receiving device.
To remotely control the source, the playback device has to
support the AVRCP profile (Audio Video Remote Control
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
Logging on devices (Pairing)
Before you listen to music via the unit, you must pair the
1.	 Ensure, that the Bluetooth function is activated in your
player (e.g. mobile phone). For this, refer to the operation
manual of your player.
2.	 Press the FUNCTION button (19 on the device) repeat-
edly, until “BT” is shown on the display. Alternatively, you
can also press the AUX/BT button (3 on the remote).
3.	 Chose the Bluetooth menu in your player and register
the device in your player. For this, refer to the operation
manual of your player. The device “BSS 4808” will show
in your player as a selection.
Only one player can be connected to the device. If
the device is already connected to another player, the
device will not appear in the BT selection menu.
4.	 Now enter the password “0000” in your player, depend-
ing on the device manufacturers, model, and software
Pay attention to the indicators on your player to check
whether the devices are successfully connected to each other.
For operation, please refer to the section “Description of the
Operating Buttons”.
If possible, adjust the volume of the external unit to a com-
fortable level.
•	 Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect the
•	 In case of problems during repairing of a playback
device, deactivate the WiFi-/ and mobile data function
in your playback device.
•	 The Bluetooth compatibility cannot be ensured for
devices (e.g. mobile phones) getting released in the
•	 To ensure an optimal connection, make sure that the
battery of your player is completely charged.
•	 Some of the mobile phone brands have an energy-sav-
ing mode. Deactivate the energy-saving mode as it can
otherwise result in problems during the data transfer
through Bluetooth.
•	 To be able to transfer audio data, Bluetooth needs to
stay activated in your player Observe the operation
manual of your player.
•	 If a mobile phone on which you are playing music re-
ceives a call, the music will be interrupted. The sound is
played back by the speaker depending on the mobile
phone. To transfer the conversation to your mobile tele-
phone, please refer to the popup on the mobile phone
display. After you have terminated the phone call, the
devices will be connected to each other again. You may
have to restart playback.
Page: 50
English 51
Description of the Operating Buttons
You may temporarily stop playback and start again. The
elapsed playing time will flash on the display. Pressing the
button again will continue playback from the same position.
During playback:
With the button you may skip to the next or next but one
track, etc. Press and hold this button to quickly search music
(sound will be muted).
You may operate the button as followed:
Press 1 x =	 Starts current track again from the beginning.
Press 2 x =	 Skips back to previous track.
Press 3 x =	 Plays track prior to that, etc. Press and hold
this button to quickly search music (sound will
be muted).
During radio mode:
Tune the desired radio station.
STOP (7/9)
The CD or the songstops.
During FM radio mode:
Switch between STEREO and MONO.
MUTE (15/15)
Quickly turn off the sound. “MUTE” will flash in the display.
To cancel this function, press MUTE again.
EQ (18/7)
(Preset equalizer function). There are different sound modes
Press 1x:	 (REPEAT lights up) The current track will be
repeated entirely.
Press 2x:	 (REPEAT ALL lights up) The complete CD will
be repeated entirely.
Press 3x:	 (INTRO lights up) Each title of the CD will be
played for 10 seconds.
Press 4x:	 All functions will be canceled. Normal play-
back will be continued.
Only for CDs in MP3 format:
Press 1x:	 The current track will be repeated continu-
ously (The display will show REPEAT).
Press 2x:	 The selected folder of the MP3 CD will be
repeated continuously (the display will show
REPEAT ALBUM). Use FOLDER+/- buttons
(14/16/14) to select the individual folders.
Press 3x:	 The entire CD will be repeated continuously
(REPEAT ALL is displayed).
Press 4x:	 Each title of the CD will be played for 10 sec-
onds each (INTRO will appear on the display).
Press 5x:	 The function will be deactivated and the CD
will be played in normal mode.
RANDOM (12 on the remote)
The display will show “RANDOM” and the number of the
track that will be played first. All tracks will be played con-
secutively in random order.
FOLDER +/- (14/16/14)
CD in MP3 format:
Press these buttons during playback to switch one folder up
or down. The display shortly shows a message, e.g. ALBUM
02, Then the system automatically starts play-back of the MP3
CD. When pressing the buttons during stop mode, the mes-
sage will also shortly be shown in the display. Then press
PLAY/PAUSE to start playback.
PRESET (5 on the remote)
During radio mode:
Select a stored radio station.
ID3 (6 on the remote)
In case of a CD or file in the MP3 format:
Press the button to turn on the function. “ID3 ON” will show
in the display for a short time. In case of a stored ID-3 Tag in-
formation it will show up in the display as a continuing band.
Press the button again to deactivate the function. “ID3 OFF”
will show in the display for a short time.
PROG (10/4)
To save the stations and to set the programmed playback.
Program Playback
Program playback in desired sequence. (Only in CD/USB/SD
1.	 Press STOP button (7/9).
2.	 Press PROG button (10/4). The display will show “- - - -
PR:01” (“track” PR: “memory position”) and MEMORY.
Use the / buttons (9/8) to select the desired track and
press PROG buttons again. The display will change to
memory position P02.
3.	 Use the / buttons to select the next track and press
PROG again. Repeat the steps until you have selected all
If the memory capacity of the programmable title is
reached, “FULL” will be displayed.
4.	 Press the PLAY/PAUSE button (8/11). Playback starts.
The display will show the first selected track number.
5.	 Press STOP button once to stop playback. The memory
will be kept.
Page: 51
6.	 For repeated playback of the programmes, press the
PLAY/PAUSE button.
7.	 To delete memory, please press STOP button twice.
MEMORY will no longer be displayed.
The device will stop automatically after all stored tracks have
been played. The program sequence will be kept in the
memory until you switch to another mode, remove the CD
from the compartment or switch off the device.
It is possible to combine program playback with the REPEAT
function. After programming and starting playback, please
press REPEAT button (6/13) up to three times; the functions
can be applied as described under “REPEAT“.
Playback of music files in MP3 format
This device allows the playback of music files in MP3 format.
The device furthermore supports the common CD types: CD,
CD-RW, and CD-R.
Your device can play MP3 CDs. These are compressed CDs
that can store up to 200 tracks. Your device automatically
recognizes MP3 discs (the display will show total number of
tracks and folders). Please refer to chapter “Playing CD/MP3”
for playback of such CDs. You may program tracks as already
described under “Program playback”.
Please note:
There are many burning and compressing methods, as well
as differences in quality of CDs and burnt CDs.
Furthermore, the music industry does not apply fixed stan-
dards (copy protection).
For that reason there might, in rare cases, occur problems
when playing CDs and MP3 discs. That is not a malfunction
of this device.
Cleaning and maintenance
•	 Disconnect the mains plug before cleaning.
•	 You may wipe off external stains, using a slightly damp
cloth without any additives.
Symptoms Course Solution
CD can not be
played back.
CD is not inserted or
inserted incorrectly.
Ensure that the disc
is inserted with the
label facing upwards.
Batteries too weak. Insert new batteries
or operate the device
with the mains lead.
CD jumps dur-
ing playback.
Check the disc for
fingerprints, dirt or
Check the disc for
fingerprints, dirt or
The unit does
not work.
The unit is blocked
and “hangs”.
Disconnect the mains
plug for approxi-
mately 5 seconds.
Then switch the unit
back on.
Volume (3)
and basses
(20) cannot be
adjusted on
the device.
The PROG but-
ton (10/4) was held
pressed down until
the time display ap-
peared. Then one
of the controls was
pressed while the
time was displayed.
Press any button to
release the lock of
the control.
No audio
signal via the
Speaker is not paired
to the audio source.
Check whether a
connection exists. If
necessary, pair the
speaker again to the
audio source.
Volume too low Increase the volume
on the speaker
Increase the volume
on the audio source.
cannot be
Pairing does not work Check whether
the audio source
supports the A2DP
Audio source is
switched off
Switch on the audio
Bluetooth is switched
off at the audio
Switch on the
Bluetooth function in
the audio source.
Bluetooth version is
not supported.
Use a different
playback unit.
Page: 52
English 53
Technical Specifications
Model:..................................................................................BSS 4808
Voltage supply:...................................................DC 12 V
Battery operation:...................................10x 1.5 V Type UM1/R20
Output power:............................................................400 W PMPO
Power consumption:.................................................................36 W
Net weight:................................................................................5.8 kg
Frequency ranges:................................FM 87.5 ~ 108.0 MHz
AC adapter
Protection class:.................................................................................II
Input:.........................................................AC 100-240 V~ 50/60 Hz
Output:............................................................................DC 12 V, 3 A
Bluetooth support:.........................................................V2.0 + EDR
...................................................................approx. 15 Meter
Transmission frequency:.......................................................2.4 GHz
The right to make technical and design modifications in
the course of continuous product development remains
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.
Meaning of the “Wheelie Bin” Symbol
Take care of our environment, do not dispose of electrical
applicances via the household waste.
Dispose of obsolete or defective electrical appliances via
municipal collection points.
Please help to avoid potential environmental and health
impacts through improper waste disposal.
You contribute to recycling and other forms of utilization of
old electric and electronic appliances.
Your municipality provides you with information about col-
lecting points.

Question & answers

Aeg bss 4808 how do you connect the Bluetooth please

Published on 1 year ago by Nick

Ask a question about the AEG BSS 4808

Have a question about the AEG BSS 4808 but cannot find the answer in the user manual? Perhaps the users of can help you answer your question. By filling in the form below, your question will appear below the manual of the AEG BSS 4808. Please make sure that you describe your difficulty with the AEG BSS 4808 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.